Bubble dynamics and heat transfer in mixture boiling

2002 ◽  
Author(s):  
Yasunobu Fujita ◽  
Qiang Bai
Keyword(s):  
Heat Transfer ◽  
Bubble Dynamics

scholarly journals Predicting Critical Heat Flux With Multiphase CFD: 4 Years in the Making

2017 ◽  
Author(s):  
Emilio Baglietto ◽  
Etienne Demarly ◽  
Ravikishore Kommajosyula
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Critical Heat Flux ◽  
Bubble Dynamics ◽  
Flow Boiling ◽  
Heated Surface ◽  
Force Balance ◽  
Modeling Framework ◽  
Lift Off ◽  
Limiting Condition

Advancement in the experimental techniques have brought new insights into the microscale boiling phenomena, and provide the base for a new physical interpretation of flow boiling heat transfer. A new modeling framework in Computational Fluid Dynamics has been assembled at MIT, and aims at introducing all necessary mechanisms, and explicitly tracks: (1) the size and dynamics of the bubbles on the surface; (2) the amount of microlayer and dry area under each bubble; (3) the amount of surface area influenced by sliding bubbles; (4) the quenching of the boiling surface following a bubble departure and (5) the statistical bubble interaction on the surface. The preliminary assessment of the new framework is used to further extend the portability of the model through an improved formulation of the force balance models for bubble departure and lift-off. Starting from this improved representation at the wall, the work concentrates on the bubble dynamics and dry spot quantification on the heated surface, which governs the Critical Heat Flux (CHF) limit. A new proposition is brought forward, where Critical Heat Flux is a natural limiting condition for the heat flux partitioning on the boiling surface. The first principle based CHF is qualitatively demonstrated, and has the potential to deliver a radically new simulation technique to support the design of advanced heat transfer systems.

Thermal Bubble Dynamics Under the Effect of Acoustic Vibration

2009 ◽  
Author(s):  
Xiaopeng Qu ◽  
Huihe Qiu
Keyword(s):  
Heat Transfer ◽  
Acoustic Field ◽  
Vapor Bubble ◽  
Boiling Heat Transfer ◽  
High Speed ◽  
Bubble Dynamics ◽  
Acoustic Vibration ◽  
Micro Electro Mechanical System ◽  
Mems Technology ◽  
Enhanced Boiling

The effect of acoustic field on the dynamics of micro thermal bubble is investigated in this paper. The micro thermal bubbles were generated by a micro heater which was fabricated by standard Micro-Electro-Mechanical-System (MEMS) technology and integrated into a mini chamber. The acoustic field formed in the mini chamber was generated by a piezoelectric plate which was adhered on the top side of the chamber’s wall. The dynamics and related heat transfer induced by the micro heater generated vapor bubble with and without the existing of acoustic field were characterized by a high speed photograph system and a micro temperature sensor. Through the experiments, it was found that in two different conditions, the temperature changing induced by the micro heater generated vapor bubble was significantly different. From the analysis of the high speed photograph results, the acoustic force induced micro thermal bubble movements, such as forcibly removing, collapsing and sweeping, were the main effects of acoustic enhanced boiling heat transfer. The experimental results and theoretical analysis were helpful for understanding of the mechanisms of acoustic enhanced boiling heat transfer and development of novel micro cooling devices.

Droplet and Bubble Dynamics in Saturated FC-72 Spray Cooling

2005 ◽  
Author(s):  
Ruey-Hung Chen ◽  
David S. Tan ◽  
Kuo-Chi Lin ◽  
Louis C. Chow ◽  
Alison R. Griffin ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Bubble Dynamics ◽  
Bubble Diameter ◽  
Spray Cooling ◽  
Transfer Enhancement ◽  
Secondary Nucleation ◽  
Bubble Density ◽  
Experimental Findings ◽  
Small Bubbles ◽  
Nucleation Bubble

Droplet and bubble dynamics and nucleate heat transfer in saturated FC-72 spray cooling were studied using a simulation model. Using the experimentally observed bubble growth rate, submodels were assumed based on physical reasoning for the number of secondary nuclei entrained by the impinging droplets, bubble puncturing by the impinging droplets, bubble merging and the spatial distribution of secondary nuclei. The predicted nucleate heat transfer was in agreement with experimental findings. Dynamic aspects of the droplets and bubbles, which had been difficult to observe experimentally, and their ability in enhancing nucleate heat transfer were then discussed based on the results of the simulation. These aspects include bubble merging, bubble puncturing by impinging droplets, secondary nucleation, bubble size distribution and bubble diameter at puncture. Simply increasing the number of secondary nuclei is not as effective in enhancing nucleate heat transfer as when it is also combined with increased bubble puncturing frequency by the impinging droplets. For heat transfer enhancement, it is desirable to have as many small bubbles and as high a bubble density as possible.

Development of Bubble Departure Diameter Model Based on Force Analysis

2017 ◽  
Author(s):  
Ye Tian ◽  
Wei Huang ◽  
Pengfei Li ◽  
Simin Cao ◽  
Yan Sun
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Drag Force ◽  
Bubble Dynamics ◽  
Hydrodynamic Pressure ◽  
Surface Tension Force ◽  
Force Analysis ◽  
Pressure Force ◽  
Model Based ◽  
Unsteady Drag Force

Bubble departure diameter has significant effect on bubble dynamics and heat transfer in boiling system, and it is difficult to be measured in a boiling system. Therefore, a method to predict bubble departure diameter is necessary to study of bubble dynamics and heat transfer in boiling system. A new theoretical model based on force analysis is proposed for the prediction of bubble departure diameter in vertical boiling system in this paper. Surface tension force, unsteady drag force, quasi-steady drag force, shear lift force, buoyancy force, hydrodynamic pressure force and contact pressure force are taken into account to build the model. Chen’s experimental data is used to validate the model, the averaged relative deviation between the predict results of the model and the experimental data is less than ±14.8%.

Two-Phase Heat Transfer Enhancement on Sintered Copper Microparticle Porous Structure Module Surface

2009 ◽  
Author(s):  
Calvin H. Li ◽  
Ting Li ◽  
Brian Kanney
Keyword(s):  
Heat Transfer ◽  
Porous Structure ◽  
Bubble Dynamics ◽  
Transfer Enhancement ◽  
Enhanced Heat Transfer ◽  
Two Phase ◽  
Sintered Copper ◽  
Theoretical Predictions ◽  
Heat Transfer Capacity ◽  
Two Phase Heat Transfer

An experimental study of the pool boiling two-phase heat transfer on a sintered Cu microparticle porous structure module surface is conducted. Enhanced heat transfer capacity of this module surface has been reported, and the boiling characteristics have been investigated. The bubble dynamics and nucleate size distribution have been compared to the theoretical predictions, and the speculated mechanisms have been discussed.

Sign in / Sign up

Export Citation Format

Share Document