LOCAL HEAT TRANSFER CHARACTERISTICS OF A ROTATING DISK UNDER JET IMPINGEMENT COOLING

1998 ◽  
Author(s):  
Nader Saniei ◽  
Xiaojun Terry Yan ◽  
Wesley W. Schooley
Keyword(s):  
Heat Transfer ◽  
Jet Impingement ◽  
Local Heat Transfer ◽  
Rotating Disk ◽  
Local Heat ◽  
Heat Transfer Characteristics ◽  
Impingement Cooling ◽  
Transfer Characteristics

Numerical Study on Flow and Heat Transfer Characteristics of Jet Impingement Cooling

2011 ◽  
Vol 148-149 ◽  
pp. 680-683
Author(s):  
Run Peng Sun ◽  
Wei Bing Zhu ◽  
Hong Chen ◽  
Chang Jiang Chen
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Numerical Study ◽  
Cross Flow ◽  
Jet Impingement ◽  
Local Heat Transfer ◽  
Transfer Characteristic ◽  
Heat Transfer Characteristics ◽  
Impingement Cooling ◽  
Transfer Characteristics

Three-dimensional numerical study is conducted to investigate the heat transfer characteristics for the flow impingement cooling in the narrow passage based on cooling technology of turbine blade.The effects of the jet Reynolds number, impingement distance and initial cross-flow on heat transfer characteristic are investigated.Results show that when other parameters remain unchanged local heat transfer coefficient increases with increase of jet Reynolds number；overall heat transfer effect is reduced by initial cross-flow；there is an optimal distance to the best effect of heat transfer.

Heat Transfer of Confined Circular Jet Impingement

2001 ◽  
Vol 17 (1) ◽  
pp. 29-38
Author(s):  
Shou-Shing Hsieh ◽  
Jung-Tai Huang ◽  
Huang-Hsiu Tsai
Keyword(s):  
Heat Transfer ◽  
Average Nusselt Number ◽  
Jet Impingement ◽  
Local Heat Transfer ◽  
Target Surface ◽  
Local Heat ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
Plate Spacing ◽  
Single Jet

ABSTRACTExperiments for heat transfer characteristics of confined circular single jet impingement were conducted. The effect of jet Reynolds number, jet hole-to-plate spacing and heat flux levels on heat transfer characteristics of the heated target surface was examined and presented. The local heat transfer coefficient along the surface is measured and correlations of the stagnation point, local and average Nusselt number are developed and discussed. Finally, comparisons of the present data with existing results were also made.

scholarly journals Local Heat Transfer Characteristics of Multi Jet Impingement on High Temperature Plate Surfaces

2018 ◽  
Vol 58 (1) ◽  
pp. 132-139 ◽  
Author(s):  
Bingxing Wang ◽  
Dong Lin ◽  
Bo Zhang ◽  
Lei Xiong ◽  
Zhaodong Wang ◽  
...  
Keyword(s):  
Heat Transfer ◽  
High Temperature ◽  
Jet Impingement ◽  
Local Heat Transfer ◽  
Local Heat ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics

scholarly journals Jet Impingement Heat Transfer Characteristics with Variable Extended Jet Holes under Strong Crossflow Conditions

Aerospace ◽  
2022 ◽  
Vol 9 (1) ◽  
pp. 44
Author(s):  
Xing Yang ◽  
Hang Wu ◽  
Zhenping Feng
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Jet Impingement ◽  
Local Heat Transfer ◽  
Local Heat ◽  
Thermochromic Liquid Crystal ◽  
Pumping Power ◽  
Heat Transfer Characteristics ◽  
Target Plate ◽  
Transfer Characteristics

In this paper, detailed flow patterns and heat transfer characteristics of a jet impingement system with extended jet holes are experimentally and numerically studied. The jet holes in the jet plate present an inline array of 16 × 5 rows in the streamwise (i.e., the crossflow direction) and spanwise directions, where the streamwise and spanwise distances between adjacent holes, which are normalized by the jet hole diameter (xn/d and yn/d), are 8 and 5, respectively. The jets impinge onto a smooth target plate with a normalized distance (zn/d) of 3.5 apart from the jet plate. The jet holes are extended by inserting stainless tubes throughout the jet holes and the extended lengths are varied in a range of 1.0d–2.5d, depending on the jet position in the streamwise direction. The experimental data is obtained by using the transient thermochromic liquid crystal (TLC) technique for wide operating jet Reynolds numbers of (1.0 × 104)–(3.0 × 104). The numerical simulations are well-validated using the experimental data and provide further insight into the flow physics within the jet impingement system. Comparisons with a traditional baseline jet impingement scheme show that the extended jet holes generate much higher local heat transfer levels and provide more uniform heat transfer distributions over the target plate, resulting in the highest improvement of approximately 36% in the Nusselt number. Although the extended jet hole configuration requires a higher pumping power to drive the flow through the impingement system, the gain of heat transfer prevails over the penalty of flow losses. At the same pumping power consumption, the extended jet hole design also has more than 10% higher heat transfer than the baseline scheme.

Heat Transfer Characteristics of an Impinging Jet in Crossflow

2011 ◽  
Vol 133 (12) ◽  
Author(s):  
Lei Wang ◽  
Bengt Sundén ◽  
Andreas Borg ◽  
Hans Abrahamsson
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Velocity Ratio ◽  
Jet Impingement ◽  
Local Heat Transfer ◽  
Impinging Jet ◽  
Local Heat ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
Jet In Crossflow

The heat transfer characteristics of an impinging jet into a crossflow have been investigated by the liquid crystal thermography technique. The jet nozzle is circular and is inclined at 10 deg with respect to the target wall. In a turbulent flow regime, the effects of the jet Reynolds number, the velocity ratio, and the crossflow Reynolds number on the heat transfer are examined. The results show that the heat transfer patterns are strongly affected by the jet Reynolds number and the velocity ratio. For a given jet Reynolds number, it is found that the crossflow diminishes the peak Nusselt number in the jet impingement region. However, in the wall jet region, the results suggest that the local heat transfer is nearly independent of the crossflow Reynolds number.

Heat Transfer Characteristics of Downward Facing Hot Horizontal Surfaces Using Mist Jet Impingement

2017 ◽  
Author(s):  
Ashutosh Kumar Yadav ◽  
Parantak Sharma ◽  
Avadhesh Kumar Sharma ◽  
Mayank Modak ◽  
Vishal Nirgude ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Surface Heat Flux ◽  
Cooling System ◽  
Water Pressure ◽  
Jet Impingement ◽  
Surface Heat ◽  
Heat Transfer Characteristics ◽  
Impingement Cooling ◽  
Transfer Characteristics

Impinging jet cooling technique has been widely used extensively in various industrial processes, namely, cooling and drying of films and papers, processing of metals and glasses, cooling of gas turbine blades and most recently cooling of various components of electronic devices. Due to high heat removal rate the jet impingement cooling of the hot surfaces is being used in nuclear industries. During the loss of coolant accidents (LOCA) in nuclear power plant, an emergency core cooling system (ECCS) cool the cluster of clad tubes using consisting of fuel rods. Controlled cooling, as an important procedure of thermal-mechanical control processing technology, is helpful to improve the microstructure and mechanical properties of steel. In industries for heat transfer efficiency and homogeneous cooling performance which usually requires a jet impingement with improved heat transfer capacity and controllability. It provides better cooling in comparison to air. Rapid quenching by water jet, sometimes, may lead to formation of cracks and poor ductility to the quenched surface. Spray and mist jet impingement offers an alternative method to uncontrolled rapid cooling, particularly in steel and electronics industries. Mist jet impingement cooling of downward facing hot surface has not been extensively studied in the literature. The present experimental study analyzes the heat transfer characteristics a 0.15mm thick hot horizontal stainless steel (SS-304) foil using Internal mixing full cone (spray angle 20 deg) mist nozzle from the bottom side. Experiments have been performed for the varied range of water pressure (0.7–4.0 bar) and air pressure (0.4–5.8 bar). The effect of water and air inlet pressures, on the surface heat flux has been examined in this study. The maximum surface heat flux is achieved at stagnation point and is not affected by the change in nozzle to plate distance, Air and Water flow rates.

scholarly journals Investigations of Flow and Heat Transfer Characteristics in a Channel Impingement Cooling Configuration with a Single Row of Water Jets

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4327
Author(s):  
Min-Seob Shin ◽  
Santhosh Senguttuvan ◽  
Sung-Min Kim
Keyword(s):  
Heat Transfer ◽  
Local Heat Transfer ◽  
Target Surface ◽  
Channel Height ◽  
Heat Transfer Characteristics ◽  
Transfer Coefficients ◽  
Impingement Cooling ◽  
Average Heat ◽  
Transfer Characteristics ◽  
Flow And Heat Transfer

The present study experimentally and numerically investigates the effect of channel height on the flow and heat transfer characteristics of a channel impingement cooling configuration for various jet Reynolds numbers in the range of 2000–8600. A single array consisting of eleven jets with 0.8 mm diameter injects water into the channel with 2 mm width at four different channel heights (3, 4, 5, and 6 mm). The average heat transfer coefficients at the target surface are measured by maintaining a temperature difference between the jet exit and the target surface in the range of 15–17 °C for each channel height. The experimental results show the average heat transfer coefficient at the target surface increases with the jet Reynolds number and decreases with the channel height. An average Nusselt number correlation is developed based on 85 experimentally measured data points with a mean absolute error of less than 4.31%. The numerical simulation accurately predicts the overall heat transfer rate within 10% error. The numerical results are analyzed to investigate the flow structure and its effect on the local heat transfer characteristics. The present study advances the primary understanding of the flow and heat transfer characteristics of the channel impingement cooling configuration with liquid jets.

Sign in / Sign up

Export Citation Format

Share Document