HEAT TRANSFER PERFORMANCE OF A ROOF-SPRAY COOLING SYSTEM EMPLOYING THE TRANSFER FUNCTION METHOD

1994 ◽  
Author(s):  
J. A. Clements ◽  
S.A. Sherif
Keyword(s):  
Heat Transfer ◽  
Transfer Function ◽  
Function Method ◽  
Heat Transfer Performance ◽  
Cooling System ◽  
Spray Cooling ◽  
Transfer Performance ◽  
Transfer Function Method

Formation of Nano-Adsorption Layer and Its Effects on Nanofluid Spray Heat Transfer Performance

2015 ◽  
Vol 137 (2) ◽  
Author(s):  
Tong-Bou Chang
Keyword(s):  
Heat Transfer ◽  
Layer Thickness ◽  
Adsorption Layer ◽  
Heat Transfer Performance ◽  
Cooling System ◽  
Heated Surface ◽  
Spray Cooling ◽  
Working Fluid ◽  
Transfer Performance ◽  
Test Pieces

For spray cooling using nanofluid as the working fluid, a nano-adsorption layer is formed on the heated surface and affects the heat transfer performance of the cooling system. This study performs an experimental investigation into the formation of this nano-adsorption layer and its subsequent effects on the spray heat transfer performance of a cooling system using Al2O3–water nanofluid as the working fluid. The experiments consider four different nanoparticle volume fractions (i.e., 0 vol. %, 0.001 vol. %, 0.025 vol. %, and 0.05 vol. %) and two different surface roughnesses (i.e., 0.1 μm and 1.0 μm). The experimental results show that the 0.001 vol. % nanofluid yields the optimal heat transfer performance since most of the nanoparticles rebound from the heated surface directly on impact or are washed away by subsequently arriving droplets. The surface compositions of the spray-cooled specimens are examined using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). The results reveal that for all of the nanofluids, a nano-adsorption layer is formed on the surface of the spray-cooled test pieces. Moreover, the layer thickness increases with an increasing nanoparticle concentration. A greater nano-adsorption layer thickness not only results in a higher thermal resistance but also reduces the effect of the surface roughness in enhancing the heat transfer performance. In addition, the nano-adsorption layer absorbs the nanofluid droplets under the effects of capillary forces, and therefore reduces the contact angle, which induces a hydrophilic surface property.

scholarly journals Analysis of Wetting Characteristics on Microstructured Hydrophobic Surfaces for the Passive Containment Cooling System

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Wei Zhao ◽  
Xiang Zhang ◽  
Chunlai Tian ◽  
Zhan Gao
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Performance ◽  
Cooling System ◽  
Heat Removal ◽  
Interface State ◽  
Transfer Performance ◽  
Hydrophobic Property ◽  
High Mechanical Strength ◽  
Feasible Solutions ◽  
Baxter Model

As the heat transfer surface in the passive containment cooling system, the anticorrosion coating (AC) of steel containment vessel (CV) must meet the requirements on heat transfer performance. One of the wall surface ACs with simple structure, high mechanical strength, and well hydrophobic characteristics, which is conductive to form dropwise condensation, is significant for the heat removal of the CV. In this paper, the grooved structures on silicon wafers by lithographic methods are systematically prepared to investigate the effects of microstructures on the hydrophobic property of the surfaces. The results show that the hydrophobicity is dramatically improved in comparison with the conventional Wenzel and Cassie-Baxter model. In addition, the experimental results are successfully explained by the interface state effect. As a consequence, it is indicated that favorable hydrophobicity can be obtained even if the surface is with lower roughness and without any chemical modifications, which provides feasible solutions for improving the heat transfer performance of CV.

scholarly journals Enhanced heat transfer characteristics of conjugated air jet impingement on a finned heat sink

2017 ◽  
Vol 21 (1 Part A) ◽  
pp. 279-288 ◽  
Author(s):  
Shuxia Qiu ◽  
Peng Xu ◽  
Liping Geng ◽  
Arun Mujumdar ◽  
Zhouting Jiang ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Enhancement ◽  
Heat Sink ◽  
Heat Transfer Performance ◽  
Cooling System ◽  
Flow Characteristics ◽  
Jet Impingement ◽  
Transfer Performance ◽  
Transfer Enhancement ◽  
Air Jet

Air jet impingement is one of the effective cooling techniques employed in micro-electronic industry. To enhance the heat transfer performance, a cooling system with air jet impingement on a finned heat sink is evaluated via the computational fluid dynamics method. A two-dimensional confined slot air impinging on a finned flat plate is modeled. The numerical model is validated by comparison of the computed Nusselt number distribution on the impingement target with published experimental results. The flow characteristics and heat transfer performance of jet impingement on both of smooth and finned heat sinks are compared. It is observed that jet impingement over finned target plate improves the cooling performance significantly. A dimensionless heat transfer enhancement factor is introduced to quantify the effect of jet flow Reynolds number on the finned surface. The effect of rectangular fin dimensions on impingement heat transfer rate is discussed in order to optimize the cooling system. Also, the computed flow and thermal fields of the air impingement system are examined to explore the physical mechanisms for heat transfer enhancement.

Experimental study on heat transfer performance of a novel compact spray cooling module

2019 ◽  
Vol 154 ◽  
pp. 150-156 ◽  
Author(s):  
Li-Jia Jiang ◽  
Shou-Li Jiang ◽  
Wen-Long Cheng ◽  
Yong-Le Nian ◽  
Rui Zhao
Keyword(s):  
Heat Transfer ◽  
Experimental Study ◽  
Heat Transfer Performance ◽  
Spray Cooling ◽  
Transfer Performance ◽  
Cooling Module

The Effect of Initial Cross Flow on the Cooling Performance of a Narrow Impingement Channel

2005 ◽  
Vol 127 (4) ◽  
pp. 358-365 ◽  
Author(s):  
Andrew C. Chambers ◽  
David R. H. Gillespie ◽  
Peter T. Ireland ◽  
Geoffrey M. Dailey
Keyword(s):  
Heat Transfer ◽  
Large Scale ◽  
Heat Transfer Performance ◽  
Cooling System ◽  
Cross Flow ◽  
Scale Model ◽  
Transfer Performance ◽  
Test Technique ◽  
Turbine Blade Cooling ◽  
Turbine Cooling

Impingement channels are often used in turbine blade cooling configurations. This paper examines the heat transfer performance of a typical integrally cast impingement channel. Detailed heat transfer coefficient distributions on all heat transfer surfaces were obtained in a series of low temperature experiments carried out in a large-scale model of a turbine cooling system using liquid crystal techniques. All experiments were performed on a model of a 19-hole, low aspect ratio impingement channel. The effect of flow introduced at the inlet to the channel on the impingement heat transfer within the channel was investigated. A novel test technique has been applied to determine the effect of the initial cross flow on jet penetration. The experiments were performed at an engine representative Reynolds number of 20,000 and examined the effect of additional initial cross flow up to 10 percent of the total mass flow. It was shown that initial cross flow strongly influenced the heat transfer performance with just 10 percent initial cross flow able to reduce the mean target plate jet effectiveness by 57 percent.

scholarly journals Effects of multiple-nozzle distribution on large-scale spray cooling via numerical investigation

2019 ◽  
Vol 23 (5 Part B) ◽  
pp. 3015-3024
Author(s):  
Qiang Xie ◽  
Zuobing Chen ◽  
Gong Chen ◽  
Yongjie Yu ◽  
Zheyu Zhao
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Large Scale ◽  
Heat Transfer Performance ◽  
Spray Cooling ◽  
Transfer Performance ◽  
Enhance Heat Transfer ◽  
Cooling Performance ◽  
The Mean ◽  
Real Practice

Spray cooling has been widely employed in many applications due to its high flux removal ability. A previous study has been conducted to reveal the large-scale spray cooling performance of an industrial used single nozzle. Continuously, influence of multiple-nozzle distribution has also been numerically investigated in present work. The mean heat flux and its standard deviation and uniformity are used to qualify the cooling performance. A flat wall with 1.6 m in length and 1.0 m in width has been taken as the research object. Effects of nozzle number, distance and offset have been parametrically compared. It is found that increasing nozzle number could promote mean heat flux, improve the uniformity of cooling patterns and enhance heat transfer performance. A best nozzle number of 10 could be obtained by an equation fitting. Decreasing nozzle distance turns out to be detrimental to heat transfer. The reason comes from the collisions and interactions of two too adjacent nozzles. Based on choices in real practice, two types of arrays i. e. perpendicular and skew array have been discussed and compared. It is concluded that the skew array could obtain higher heat flux with more uniform distribution.

Sign in / Sign up

Export Citation Format

Share Document