Arthroscopic assisted femoral tunnel drilling for the intra-articular anatomic cranial cruciate ligament reconstruction in dogs

2015 ◽  
Vol 43 (05) ◽  
pp. 299-308 ◽  
Author(s):  
P. Böttcher ◽  
A. Bolia
Keyword(s):  
Femoral Tunnel ◽  
Cruciate Ligament ◽  
Tibial Tunnel ◽  
Bone Tunnel ◽  
Lateral Condyle ◽  
Cranial Cruciate Ligament ◽  
Technical Requirements ◽  
Femoral Tunnel Drilling ◽  
Tunnel Positioning ◽  
Tunnel Misplacement

SummaryObjective: To develop and test an arthroscopic aiming device for extrato intra-articular femoral tunnel drilling emerging at the center of the femoral insertion of the cranial cruciate ligament (CrCL) in medium to large breed dogs. Material and methods: Hindlimbs (n = 12) of six cadaveric dogs (≥ 20 kg bodyweight). One hindlimb from each cadaver was randomly chosen. On a standard medio-lateral stifle radiograph the caudo-cranial position of the CrCL center was measured and transferred onto an adjustable aiming device. After arthroscopic debridement of the CrCL the aiming device was hooked behind the lateral condyle and a 2.4 mm guide pin was placed from extrato intra-articular. The intra-articular position of the resulting bone tunnel was evaluated radiographically as well as compared to the anatomic CrCl center of the contralateral hindlimb using 3D renderings. Results: According to the postoperative radiographs all six drill tunnels were located at or near the CrCL center. The median absolute 3D error from the anatomical center of the CrCL was 0.6 mm (range: 0.2–0.9 mm). Conclusion: Precise anatomic placement of the femoral tunnel for intra-articular repair of the CrCL was achieved using an adjustable aiming device. Clinical relevance: The proposed technique will reduce femoral tunnel misplacement when performing intra-articular CrCL repair in dogs. In combination with the published technique for arthroscopic tibial tunnel drilling using a similar aiming device, the technical requirements for arthroscopic assisted tunnel positioning for anatomical graft replacement are available.

Evaluation of Tibial Tunnel Location with the Femoral Tunnel Created Behind the Resident's Ridge in Transtibial Anterior Cruciate Ligament Reconstruction

2021 ◽  
Author(s):  
Tsuneari Takahashi ◽  
Tomohiro Saito ◽  
Tatsuya Kubo ◽  
Ko Hirata ◽  
Hideaki Sawamura ◽  
...  
Keyword(s):  
Acl Reconstruction ◽  
Femoral Tunnel ◽  
Cruciate Ligament ◽  
Tibial Tunnel ◽  
Bone Tunnel ◽  
Femoral Bone ◽  
Anterior Cruciate ◽  
Tunnel Positions ◽  
Tunnel Angle ◽  
Coronal View

AbstractFew studies have determined whether a femoral bone tunnel could be created behind the resident's ridge by using a transtibial (TT) technique-single bundle (SB)-anterior cruciate ligament (ACL) reconstruction. The aim of this study was to clarify (1) whether it is possible to create a femoral bone tunnel behind the resident's ridge by using the TT technique with SB ACL reconstruction, (2) to define the mean tibial and femoral tunnel angles during anatomic SB ACL reconstruction, and (3) to clarify the tibial tunnel inlet location when the femoral tunnel is created behind resident's ridge. Arthroscopic TT-SB ACL reconstruction was performed on 36 patients with ACL injuries. The point where 2.4-mm guide pin was inserted was confirmed, via anteromedial portal, to consider a location behind the resident's ridge. Then, an 8-mm diameter femoral tunnel with a 4.5-mm socket was created. Tunnel positions were evaluated by using three-dimensional computed tomography (3D-CT) 1 week postoperatively. Quadrant method and the resident's ridge on 3D-CT were evaluated to determine whether femoral tunnel position was anatomical. Radiological evaluations of tunnel positions yielded mean ( ±  standard deviation) X- and Y-axis values for the tunnel centers: femoral tunnel, 25.2% ± 5.1% and 41.6% ± 10.2%; tibial tunnel, 49.2% ± 3.5%, and 31.5% ± 7.7%. The bone tunnels were anatomically positioned in all cases. The femoral tunnel angle relative to femoral axis was 29.4 ± 5.5 degrees in the coronal view and 43.5 ± 8.0 degrees in the sagittal view. The tibial tunnel angle relative to tibial axis was 25.5 ± 5.3 degrees in the coronal view and 52.3 ± 4.6 degrees in the sagittal view. The created tibial bone tunnel inlet had an average distance of 13.4 ± 2.7 mm from the medial tibial joint line and 9.7 ± 1.7 mm medial from the axis of the tibia. Femoral bone tunnel could be created behind the resident's ridge with TT-SB ACL reconstruction. The tibial bone tunnel inlet averaged 13.4 mm from the medial tibial joint line and 9.7 mm medial from the tibia axis.

scholarly journals The Femoral Tunnel Drilling Angle at 45° Coronal and 45° Sagittal Provided the Lowest Peak Stress and Strain on the Bone Tunnels and Anterior Cruciate Ligament Graft

2021 ◽  
Vol 9 ◽  
Author(s):  
Rongshan Cheng ◽  
Huizhi Wang ◽  
Ziang Jiang ◽  
Dimitris Dimitriou ◽  
Cheng-Kung Cheng ◽  
...  
Keyword(s):  
Femoral Tunnel ◽  
Cruciate Ligament ◽  
Tibial Tunnel ◽  
Peak Stress ◽  
Stress And Strain ◽  
Maximum Strain ◽  
Anterior Cruciate ◽  
Bone Tunnels ◽  
Femoral Tunnel Drilling ◽  
Tunnel Entrance

Purpose: The aims of this study were to 1) investigate the effects of femoral drilling angle in coronal and sagittal planes on the stress and strain distribution around the femoral and tibial tunnel entrance and the stress distribution on the graft, following anterior cruciate ligament reconstruction (ACLR), 2) identify the optimal femoral drilling angle to reduce the risk of the tunnel enlargement and graft failure.Methods: A validated three-dimensional (3D) finite element model of a healthy right cadaveric knee was used to simulate an anatomic ACLR with the anteromedial (AM) portal technique. Combined loading of 103.0 N anterior tibial load, 7.5 Nm internal rotation moment, and 6.9 Nm valgus moment during normal human walking at joint flexion of 20° was applied to the ACLR knee models using different tunnel angles (30°/45°/60° and 45°/60° in the coronal and sagittal planes, respectively). The distribution of von Mises stress and strain around the tunnel entrances and the graft was calculated and compared among the different finite element ACLR models with varying femoral drilling angles.Results: With an increasing coronal obliquity drilling angle (30° to 60°), the peak stress and maximum strain on the femoral and tibial tunnel decreased from 30° to 45° and increased from 45° to 60°, respectively. With an increasing sagittal obliquity drilling angle (45° to 60°), the peak stress and the maximum strain on the bone tunnels increased. The lowest peak stress and maximum strain at the ACL tunnels were observed at 45° coronal/45° sagittal drilling angle (7.5 MPa and 7,568.3 μ-strain at the femoral tunnel entrance, and 4.0 MPa and 4,128.7 μ-strain at the tibial tunnel entrance). The lowest peak stress on the ACL graft occurred at 45° coronal/45° sagittal (27.8 MPa) drilling angle.Conclusions: The femoral tunnel drilling angle could affect both the stress and strain distribution on the femoral tunnel, tibial tunnel, and graft. A femoral tunnel drilling angle of 45° coronal/ 45° sagittal demonstrated the lowest peak stress, maximum strain on the femoral and tibial tunnel entrance, and the lowest peak stress on the ACL graft.

The Effect of Remnant Preservation on Tibial Tunnel Enlargement in Anterior Cruciate Ligament Reconstruction with Polyethylene Terephthalate Artificial Ligament in a Large Animal Model

2018 ◽  
Vol 32 (11) ◽  
pp. 1094-1101
Author(s):  
Jiangyu Cai ◽  
Fang Wan ◽  
Chengchong Ai ◽  
Wenhe Jin ◽  
Dandan Sheng ◽  
...  
Keyword(s):  
Acl Reconstruction ◽  
Cruciate Ligament ◽  
Tibial Tunnel ◽  
Bone Tunnel ◽  
Control Group ◽  
Micro Ct ◽  
Tunnel Enlargement ◽  
Artificial Ligament ◽  
Remnant Preservation ◽  
Anterior Cruciate

AbstractAn enlarged bone tunnel may affect the graft–bone integration and pose a problem for revision anterior cruciate ligament (ACL) surgery. The purpose of this study was to evaluate the effect of remnant preservation on tibial tunnel enlargement in ACL reconstruction with polyethylene terephthalate (PET) artificial ligament. Twenty-four skeletally mature male beagles underwent ACL reconstruction with PET artificial ligament for both knees. One knee was reconstructed with remnant preservation using sleeve technique (remnant group), while the contralateral was reconstructed without remnant preservation (control group). The animals were sacrificed at 1 day, 6 weeks, and 12 weeks after surgery for further evaluation including macroscopic observation, microcomputed tomography (micro-CT), histological assessment, and biomechanical testing. The remnant group had better synovial coverage than the control group at 6 and 12 weeks after surgery. The micro-CT analysis showed the tibial tunnel area (TTA) of the remnant group was significantly smaller and the bone volume/total volume fraction (BV/TV) value was higher than those of the control group at 6 and 12 weeks. Moreover, TTA and BV/TV at each time point were divided into three groups according to the different grade of synovial coverage. Significant association was observed between the synovial coverage degree and the TTA and BV/TV values. The histological assessment revealed that the interface width between the graft and host bone in the remnant group was smaller than that in the control group in the tibial tunnels at 6 and 12 weeks. Moreover, the remnant group had better failure load and stiffness than the control group at 12 weeks. The remnant preservation using sleeve technique could effectively promote the synovial coverage of the graft, decrease the risk of tibial tunnel enlargement by sealing the bone tunnel entrance, and enhance the biological environment for graft–bone healing after ACL reconstruction using PET artificial ligament. This technique provides a potential solution for bone tunnel enlargement following artificial ligament surgery for the acute ACL rupture in the clinical practice.

Maturity Progression of the Entire Anterior Cruciate Ligament Graft of Insertion-Preserved Hamstring Tendons by 5 Years: A Prospective Randomized Controlled Study Based on Magnetic Resonance Imaging Evaluation

2020 ◽  
Vol 48 (12) ◽  
pp. 2970-2977
Author(s):  
Yuhan Zhang ◽  
Shaohua Liu ◽  
Qingyan Chen ◽  
Yiwen Hu ◽  
Yaying Sun ◽  
...  
Keyword(s):  
Anterior Cruciate Ligament ◽  
Clinical Outcomes ◽  
Femoral Tunnel ◽  
Cruciate Ligament ◽  
Tibial Tunnel ◽  
Hamstring Tendon ◽  
Controlled Study ◽  
Randomized Controlled ◽  
Tunnel Section ◽  
Anterior Cruciate

Background: It has been reported that insertion-preserved hamstring tendon autografts (IP-HT) have better maturity than free hamstring tendon autografts (FHT) at 2 years after anterior cruciate ligament reconstruction (ACLR); however, whether insertion preservation improves the maturity of the entire autograft and clinical outcomes at 5 years after ACLR is still unclear. Purpose: To investigate the clinical outcomes and maturity of different segments using insertion-preserved and free hamstring tendon autografts up to 5 years after ACLR. Study Design: Randomized controlled trial; Level of evidence, 2. Methods: 45 patients who underwent isolated ACLR with hamstring tendon autografts were enrolled and randomized into 2 groups. The study group had ACLR with IP-HT, whereas the control group had ACLR with FHT. The International Knee Documentation Committee and Tegner scores, Lysholm activity score, and KT-1000 arthrometer measurements were evaluated preoperatively and at 6, 12, 24, and 60 months postoperatively. Three-dimensional-reconstruction MRI examinations were performed at 6, 12, 24, and 60 months to evaluate the signal/noise quotient (SNQ) values of femoral tunnel graft, intra-articular graft, and tibial tunnel graft. Results: At 60 months, the SNQ values of the intra-articular and tunnel sections for the grafts in both groups showed no difference; the clinical outcomes were improved compared with before surgery ( P < .001) and were similar in both groups. In the early stage, all graft segments in the IP-HT group had lower SNQ values than those of the FHT group. At 6 months, the entire graft in the FHT group and the femoral tunnel section in the IP-HT group had the maximum SNQ values, whereas the femoral tunnel graft had the highest SNQ value compared with intra-articular and tibial tunnel graft in each group. SNQ values of the intra-articular and tibial tunnel graft in the IP-HT group had no significant change within 60 months. Conclusion: All patients had similar clinical outcomes and graft maturity at 60 months postoperatively. The SNQ values and progressions varied at different graft sites and were highest for the femoral tunnel graft. All significantly changing SNQ values reached the maximum value at 6 months. Compared with FHT autograft, the graft maturity of IP-HT autograft recovered earlier and appeared more stable within the 60-month follow-up; however, no significant association was found between graft maturity and clinical scores.

Sign in / Sign up

Export Citation Format

Share Document