scholarly journals Wood Manufacturing and Furniture Industry in Lithuania

2017 ◽  
pp. 234-246
Author(s):  
Lilija Kalėdienė ◽  
Ernesta Lubytė ◽  
Vilmantė Karlavičienė
Keyword(s):  
Wood Products ◽  
Furniture Industry ◽  
Private Forests ◽  
Industry Waste ◽  
Wood Processing ◽  
Product Manufacturing ◽  
Traditional Industry ◽  
Favorable Conditions ◽  
Similar Growth ◽  
Wood Manufacturing

Wood manufacturing and furniture industry is a very old and traditional industry in Lithuania. This is because the processing of wood in Lithuania are favorable conditions, nearly a third of Lithuania‘s territory is covered with forests. In 2009, the state owned 1065 thousand ha or 49% of the forests. The other part consists of private forests and woodlands intended for privatization (restitution). In early 2010, 2815 companies of various sizes were engaged in manufacturing of wood products. The number of companies has slightly decreased recently, their specializations have undergone changes. Export of Lithuanian wood products was increasing for a number of years and reached EUR 1.4 billion in 2007. Import experienced similar growth and reached EUR 900 million in the same year. The share of wood products in the whole export in 2007 accounted for 11.9%, in 2009 it dropped down to 10.3%. Wood processing industry, product manufacturing process creates a lot of waste. Some are harmless, others - hazardous, the latter must be given special attention. , the wood products industry and its manufacturing processes at the beginning of 2009 were raised to 42,797 tons of various industrial wood wastes. 2009 year-end balance of wood industry waste was 43,089 tones. Hazardous waste in early 2009 was 285 tons, and at the end of the year - 2,532 tons.

scholarly journals The readiness of peninsular Malaysia wood-based industries for achieving sustainability

BioResources ◽  
2020 ◽  
Vol 15 (2) ◽  
pp. 2971-2993
Author(s):  
Nur Amira Zainul Armir ◽  
Sarani Zakaria ◽  
Rawshan Ara Begum ◽  
Norshamliza Chamhuri ◽  
Noratiqah Mohd Ariff ◽  
...  
Keyword(s):  
Sustainable Forest Management ◽  
Raw Materials ◽  
Multiple Correspondence Analysis ◽  
Peninsular Malaysia ◽  
Wood Products ◽  
Substantial Part ◽  
Furniture Industry ◽  
Wood Industry ◽  
Wood Processing ◽  
Different Types

Forests represent a substantial part of global socio-economy platforms. As the wood-based industry contributes large revenue to Malaysia’s economy, the readiness of Peninsular Malaysia towards sustainable wood-based industry was measured based on the different types of wood processing industries and Sustainable Forest Management (SFM) practice. Surveys (1,447) from all operating timber mills according to their raw materials type for wood products processing in Peninsular Malaysia were analyzed using multiple correspondence analysis (MCA). Results showed that the sustainable practice in wood industry by SFM practitioners and non-practitioners were similar. All industries are using outdated technologies and consume local raw materials in producing wood products. The furniture industry is largely aware of SFM and consumes the least amount of logs to produce furniture.

scholarly journals Organisation of procurement in wood supply chain: Improvement of possibilities in the South Morava Forest Area

2018 ◽  
pp. 97-118
Author(s):  
Dragan Nonic ◽  
Jelena Nedeljkovic ◽  
Dragan Mihajlovic ◽  
Nenad Rankovic ◽  
Branko Glavonjic
Keyword(s):  
Raw Materials ◽  
Wood Products ◽  
Forest Area ◽  
Raw Material ◽  
Public Enterprise ◽  
Business Success ◽  
The South ◽  
Private Forests ◽  
Procurement Process ◽  
Wood Processing

The procurement process is of great importance for the business success of the company. The effectiveness of a business depends to a great extent on the ability to use the environment in the procurement of resources necessary for functioning. The aim of the research is to identify the main problems in forest management in the South Morava Forest Area (SMFA), in the production and sales of beech roundwood, as well as to determinate the characteristics of the companies and the organization of the raw materials procurement process. The data were collected in the period 2014- 2017, by surveying 13 representatives of small and medium enterprises and 1 large company and interviewing 5 employees of Forest Estate ?Vranje? (Public enterprise ?Srbijasume?). The current situation in the SMFA is characterized by an unfavourable structure of beech coppice forests, inadequate forest openness and low wood mobilization from private forests. Analyzed companies are, mostly, micro and small (79.0%), founded (64.3%) less than 10 years ago, and 50% of them are engaged in sawmill and wood processing. All companies purchase and use beech technical roundwood. Wood raw material is purchased from the public and private sectors. Transport of raw materials is carried out through intermediaries (92.9%) and on ?bad? and ?very bad? (71.0%) infrastructure. However, the majority (92.9%) of them are ?partially satisfied? and ?satisfied? with the quantity and quality of delivered raw materials. There is a significant presence (86.0%) of enterprises, which, in addition to technical roundwood, procure and use other wood products (fibreboards and other reproduction materials) from suppliers from other regions. Based on the analysis of all collected data, places for improvement of wood raw materials procurement and the weaknesses of existing supply chains have been defined, as well as the proposals for improving the organization of the procurement of wood raw materials at SMFA.

scholarly journals Increasing the Strength of the Glue Line in the Production of Thermally Modified Wood Paneling

Coatings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 253
Author(s):  
Ruslan Rushanovich Safin ◽  
Aigul Ravilevna Shaikhutdinova ◽  
Ruslan Khasanshin ◽  
Shamil Mukhametzyanov ◽  
Albina Safina
Keyword(s):  
Wood Products ◽  
Ultraviolet Rays ◽  
Surface Activation ◽  
Wood Block ◽  
Two Stage ◽  
Adhesion Properties ◽  
Wood Processing ◽  
Ultraviolet Treatment ◽  
Thermally Modified Wood ◽  
Modified Wood

This work is devoted to the study of the effect of ultraviolet rays for the surface activation of pine wood thermally modified at temperatures of 180−240 °C in order to increase the surface roughness, enhance the wettability of thermal wood and the adhesive strength of the glue in the production of wood block furniture panels. Studies were carried out to measure the contact angle of wettability of thermally modified wood samples of pine, as a result of which it was determined that the ultraviolet treatment process contributes to an increase in the adhesion properties of the surface layer of thermally modified wood by more than 13% due to the reactivity of ultraviolet rays to oxidize and degrade ligno-containing wood products. At the same time, the most active process of surface activation takes place during 60 min of ultraviolet irradiation of wood with a total irradiation of at least 125 W/cm2. It was revealed that the combined effect of two-stage wood processing, including preliminary volumetric thermal modification followed by surface ultraviolet treatment, causes an increase in the moisture resistance of glued wood products by 24%. So, if the strength of the glue seam when gluing natural wood samples after boiling decreased by 46%, then the samples that underwent two-stage processing showed a decrease only by 22%. In connection with the results obtained, an improved technology for the production of furniture boards for the manufacture of moisture-resistant wood products is proposed.

scholarly journals Preliminary Qualitative Analysis and Implications of Wood Products Perception on Social Media

2020 ◽  
Vol 71 (3) ◽  
pp. 295-300
Author(s):  
Jana Šujanová ◽  
Renata Nováková ◽  
Gabriela Pavlendová ◽  
Dagmar Cagáňová ◽  
Natália Canet
Keyword(s):  
Qualitative Research ◽  
Social Networks ◽  
Social Media ◽  
Content Analysis ◽  
Civil Society ◽  
Automotive Industry ◽  
Wood Products ◽  
Furniture Industry ◽  
Current Management ◽  
University Of Technology

The article presents the results of the qualitative research of social media, managed by the Institute of the Civil Society, University of Ss. Cyril and Methodius in Trnava, in cooperation with the Slovak University of Technology in Bratislava. The research aimed to analyse different areas of the current management challenges and their perception of the selected social networks. The study concentrates on the presentation of the chosen manufacturers of the automotive industry and furniture industry on social media. The content analysis was based on the VADER (Valence Aware Dictionary and Entiment Reasoner) lexicon that was explicitly tuned to sentiments expressed in social media and QDA software.

scholarly journals WOOD COMPONENTS AS SOURCES OF PENTO-CONTAINING RAW MATERIALS FOR SYNTHESIS OF USEFUL COMPOUNDS, PRODUCTS AND REAGENTS

2021 ◽  
Vol 64 (3) ◽  
pp. 107-115
Author(s):  
Irina A. Chetvertneva ◽  
Oleg Kh. Karimov ◽  
Galina A. Teptereva ◽  
Natalia S. Tivas ◽  
Eldar M. Movsumzade ◽  
...  
Keyword(s):  
Raw Materials ◽  
Condensation Reaction ◽  
Agricultural Waste ◽  
Monomer Unit ◽  
Paper Industry ◽  
Raw Material ◽  
Chemical Transformations ◽  
Covalent Bonds ◽  
Industry Waste ◽  
Wood Processing

The paper considers the main components and products of wood processing, agricultural waste, pulp and paper industry waste and qualifies them as sources of pentose-containing resource-renewable domestic raw materials. The article describes in detail the structural components of wood as a natural polymer, which contains aromatic and carbohydrate parts. It is noted that these poly-mers are promising as raw materials for the production of useful chemical products. The role of lignin, cellolose and hemicellulose in the design of mechanical and structural properties of wood is considered. The article considers the features of the sulfonation reactions of the lignin monomer unit depending on the pH of the medium: acidic, neutral and alkaline. There are three main reac-tions that occur simultaneously with lignin in the process of wood delignification during sulfite cooking, such as the sulfonation reaction, the hydrolytic destruction reaction, and the condensation reaction. It is shown that the lignin-hemicellulose matrix contains three types of interconnected mesh structures: the lignin itself; a network of covalent bonds of lignin with hemicelluloses, and a network whose structure is obtained due to the hydrogen bond and the forces of the physical inter-action of lignin and hemicelluloses. The features of chemical transformations of the monomeric aromatic link of lignosulfonate – phenylpropane unit in the processes of wood delignification, the main chemical reactions of wood raw material delignification under the conditions of sulfite and neutral-sulfite brews are shown. The method of quantitative determination of monosaccharides in the composition of the carbohydrate part is proposed.

scholarly journals Keunggulan Komparatif dan Kompetitif Sektor Industri Pengolahan di Provinsi Jambi

2019 ◽  
Vol 3 (2) ◽  
pp. 105-116
Author(s):  
Eristian Wibisono ◽  
Amri Amir ◽  
Zulfanetti Zulfanetti
Keyword(s):  
Development Policy ◽  
Manufacturing Industry ◽  
National Development ◽  
Secondary Data ◽  
Development Planning ◽  
Wood Products ◽  
Regional Government ◽  
Furniture Industry ◽  
Location Quotient ◽  
Industry Sector

Identification of leading sectors or subsectors is one of the main tasks of the regional government and is an important part of regional development planning before formulating, drafting and establishing a better development policy strategy. The main objective of this research is to analyze and identify subsectors in the manufacturing industry sector that have comparativeness and competitiveness in Jambi Province. Main data of this study are secondary data of districts and cities in Jambi Province during the period 2011–2015 which were sourced from the Central Bureau of Statistics,  and Indonesian Ministry of National Development Planning (Bappenas). Data were analyzed using descriptive and quantitative analysis methods, namely Location Quotient analysis and Shift Share analysis. Results of the study show that the manufacturing industry subsector of Jambi Province which can be classified as comparative and competitive subsector are timber/wood products industry, paper/goods industry, rubber/rubber goods industry, and furniture industry

scholarly journals Policy on Timber Legality Verification System for Sustainable Public Procurement and Green Products

2019 ◽  
Vol 125 ◽  
pp. 10001
Author(s):  
Tuharno Tuharno ◽  
Hartuti Purnaweni ◽  
Fuad Muhammad
Keyword(s):  
Public Procurement ◽  
Human Life ◽  
Wood Products ◽  
Green Products ◽  
Wood Processing ◽  
Verification System ◽  
Forestry Sector ◽  
Timber Products ◽  
The Government ◽  
Environmental Interests

Forest natural resources in Indonesia are one of the contributors to the fulfilment of human life and development capital. However, the use of forest resources without regard to aspects of sustainability will cause damage and even extinction of the forest. Therefore, green products today have become stronger demands from various groups. The procurement of goods/services within the government has been implementing a Sustainable Public Procurement that fulfils 3 (three) aspects, namely, economic, social and environmental interests. This paper observes Timber Legality Verification System policies in supporting the provision of green products for the forestry sector and Sustainable Public Procurement that will support the achievement of sustainable development. Timber Legality Verification System policy guarantees the provision of wood products by wood processing industry that contributes to realizing good forest governance to combat illegal logging and illegal trade, as well as support improvement in environmental quality. One strategy in fulfilling green products and implementing a Sustainable Public Procurement is to use timber products that have been certified with timber legality. The policy for the use of certified wood products needs to be supported by the implementation rules and information on the list of green products and technical guidelines for the procurement.

Material-Use Trends in U.S. Furniture Manufacturing

1988 ◽  
Vol 12 (2) ◽  
pp. 102-107
Author(s):  
William G. Luppold
Keyword(s):  
Medium Density Fiberboard ◽  
The United States ◽  
Wood Products ◽  
Composite Panel ◽  
Furniture Industry ◽  
Softwood Lumber ◽  
Furniture Manufacturing ◽  
Hardwood Lumber ◽  
Panel Products ◽  
Composite Wood

Abstract Furniture manufacturers in the United States are major users of a variety of wood products. In the last two decades, traditional wood products, such as hardwood lumber, veneer, and plywood have been, in part, replaced by composite panel products, such as particleboard, hardboard, and medium-density fiberboard. This paper examines the uses of traditional and composite wood products by the wood household, upholstered household, and commercial furniture industries in descriptive and numerical terms. The analysis indicates that the substitution of composite products for traditional hardwood products has subsided in recent years in the household wood furniture industry but has continued in the commercial furniture industry. Strong growth in softwood lumber use has occurred in the household wood industry and the household upholstered furniture industry but not in the commercial furniture industry. Although hardwood lumber has been displaced by softwood-based composite panel products, greater relative decreases have occurred in hardwood veneer and veneer core plywood use because of composite panel substitution. Most recent market activities, however, indicate increased use of hardwood lumber in furniture production in the 1980s. South. J. Appl. For. 12(2):102-107.

Overview of the Canadian value-added wood products sector and the competitive factors that contribute to its success

2007 ◽  
Vol 37 (11) ◽  
pp. 2211-2226 ◽  
Author(s):  
Deborah L. DeLong ◽  
Robert A. Kozak ◽  
David H. Cohen
Keyword(s):  
Lean Manufacturing ◽  
Manufacturing Sector ◽  
Mail Survey ◽  
Value Added ◽  
Wood Products ◽  
Business Environments ◽  
Secondary Wood ◽  
Medium Enterprises ◽  
Industry Associations ◽  
Wood Manufacturing

In recent years, there has been considerable interest in the secondary wood manufacturing sector across Canada. Strengthening and facilitating the secondary wood manufacturing or the value-added sector is seen as the next step to creating a more sustainable economy across Canada. This research considered a large sample of secondary wood manufacturers across Canada and has provided standardized information for the entire sector. To evaluate the competitive position of the Canadian secondary wood manufacturers, two steps were undertaken. First, factors that have determined success in other sectors were identified. Second, the sector’s current business environments and the factors that contribute to its success were evaluated. The data that contributed to this research was based on a mail survey that was sent to all secondary wood manufacturers across Canada. The data indicated that the majority of businesses in this sector are small to medium enterprises (SMEs) and have common concerns that effect SMEs. Problems obtaining financing for expansion, market research, expanding to new markets, and upgrading employees’ skills are examples. There are also opportunities for increasing efficiencies through lean manufacturing and optimizing supply chains, but these types of initiatives will require education and training. Using logistic regression, we found that being a member of an industry association greatly increased the likelihood of a business being profitable. Thus, industry associations could be an effective conduit for the required training and education.

scholarly journals Insight into Market Supply and Demand of Private Forests in Croatia

2021 ◽  
Vol 12 (2) ◽  
Author(s):  
Karlo Beljan ◽  
Ana Bašić ◽  
Matija Bakarić ◽  
Jiří Dvořák
Keyword(s):  
Real Estate ◽  
Free Market ◽  
Supply And Demand ◽  
Temporal Distribution ◽  
Real Estate Market ◽  
Private Forests ◽  
Economic Point ◽  
Wood Processing ◽  
Average Area ◽  
The Relationship

Due to their modest 23% share, private forests in Croatia are a resource that is perceived as less important than state-owned forests. One of the basic characteristics of private forests is fragmentation, which is also the biggest obstacle to a successful and, economically speaking, sustainable management of private forests. The cases in which a private forest with its area and integrity can generate a sustainable economic income to its owner are not common. However, from an economic point of view, private forests still have one advantage. Unlike state-owned forests, private forests can be the subject of investment and change hands. Based on this, this paper investigates the supply of private forests on the free market. For private forests that were publicly put for sale in the period from 2010 to 2020, their spatial-temporal distribution and supply dynamics and trends (price and quantity) were analyzed. The data were collected from the leading real estate advertising platform in Croatia (Njuškalo.hr), and a total of 866 advertisements were analyzed, relating exclusively to the sale of raw wood material along with the accompanying forest land. On the other hand, in order to assess the demand, data were collected on the number of potential buyers who viewed the advertisements (period 2020-2021). In the observed ten-year period, a total of 1,890.63 ha of private forests with a total asking value of €32.14 million were offered on the market. The share of advertisements advertised through real estate agencies is 42.1%. The average total annual supply is 170 ha and has a growing trend (in the advertisements in the coastal part of Croatia, the average area is 1.3 ha, while the average area in the continental part is 3 ha). The prices are not constant but rising. According to compound interest, the price increase in the coastal area is 1.57% and 7.49% in the continental area. From the relationship between supply and demand or, more precisely, the relationship between price and the quantity, it was concluded that the market is not well developed and that the price is not affected by the supply/demand quantity of private forests. Furthermore, it was concluded that this market is developing in the direction of a typical real estate market in Croatia due to the fact that forest management and wood processing characteristics of forests do not define the price, but that the price is largely determined by a market with greater financial importance (the market in real estate near the Adriatic coast).

Sign in / Sign up

Export Citation Format

Share Document