Observation of structural modulations and formation of H-carbides and ζ-silicides during α2 → γ transformation in fully lamellar γ-TiAl

2002 ◽  
Vol 753 ◽  
Author(s):  
M. Karadge ◽  
P. I. Gouma
Keyword(s):  
Heat Treatment ◽  
Electron Microscope ◽  
Stacking Faults ◽  
Silicide Phase ◽  
Post Heat Treatment ◽  
Transmission Electron ◽  
Modulated Structures ◽  
Regular Arrangement ◽  
Fully Lamellar

ABSTRACTThe present paper illustrates the experimentally observed microstructures related to α2 → γ + Ti2AlC (H-carbide) and Ti5Si3 (ζ silicide) phase transformations in fully lamellar Ti-46Al-2Cr-3Nb-0.2W-0.2Si-0.1C alloy. These transformations were observed by in-situ heat treatments in the TEM at temperatures up to 800°C and by post heat treatment examination in a high-resolution transmission electron microscope. α2 dissolution was observed to start both inside the lath and at the α2/γ interface. H-type carbides were observed to nucleate inside the α2 lath, which explains the appearance of long arrays of well-aligned structures along prior α2 laths in creep-deformed samples. ζ silicide precipitates nucleate at the α2/γ interface, this growth occurs epitaxially along the pre-existing <0001>α2 direction. Modulated structures were observed during the α2 → H, newly formed γ and at the α2 / ζ interface. All these modulated structures consist of regular arrangement of stacking faults and dislocations.

A TEM study of the microstructure of avian eggshells

1992 ◽  
Vol 50 (2) ◽  
pp. 1102-1103
Author(s):  
S. Q. Xiao ◽  
S. Baden ◽  
A. H. Heuer
Keyword(s):  
Electron Microscope ◽  
Calcium Carbonate ◽  
Nucleation And Growth ◽  
Growth Mechanisms ◽  
Shell Surface ◽  
Thin Sections ◽  
Polycrystalline Metals ◽  
Transmission Electron ◽  
Nucleation And Growth Mechanisms

The avian eggshell is one of the most rapidly mineralizing biological systems known. In situ, 5g of calcium carbonate are crystallized in less than 20 hrs to fabricate the shell. Although there have been much work about the formation of eggshells, controversy about the nucleation and growth mechanisms of the calcite crystals, and their texture in the eggshell, still remain unclear. In this report the microstructure and microchemistry of avian eggshells have been analyzed using transmission electron microscope (TEM) and energy dispersive spectroscopy (EDS).Fresh white and dry brown eggshells were broken and fixed in Karnosky's fixative (kaltitanden) for 2 hrs, then rinsed in distilled H2O. Small speckles of the eggshells were embedded in Spurr medium and thin sections were made ultramicrotome.The crystalline part of eggshells are composed of many small plate-like calcite grains, whose plate normals are approximately parallel to the shell surface. The sizes of the grains are about 0.3×0.3×1 μm3 (Fig.l). These grains are not as closely packed as man-made polycrystalline metals and ceramics, and small gaps between adjacent grains are visible indicating the absence of conventional grain boundaries.

In situ TEM observations of melting in nanosized eutectic Pb-Cd inclusions embedded in Al

1996 ◽  
Vol 54 ◽  
pp. 986-987
Author(s):  
S. Hagège ◽  
U. Dahmen ◽  
E. Johnson ◽  
A. Johansen ◽  
V.S. Tuboltsev
Keyword(s):  
Electron Microscope ◽  
Melt Spinning ◽  
Ternary Alloys ◽  
Solid Matrix ◽  
Eutectic System ◽  
In Situ Tem ◽  
In Situ Observation ◽  
Orientation Relationships ◽  
Transmission Electron

Small particles of a low-melting phase embedded in a solid matrix with a higher melting point offer the possibility of studying the mechanisms of melting and solidification directly by in-situ observation in a transmission electron microscope. Previous studies of Pb, Cd and other low-melting inclusions embedded in an Al matrix have shown well-defined orientation relationships, strongly faceted shapes, and an unusual size-dependent superheating before melting.[e.g. 1,2].In the present study we have examined the shapes and thermal behavior of eutectic Pb-Cd inclusions in Al. Pb and Cd form a simple eutectic system with each other, but both elements are insoluble in solid Al. Ternary alloys of Al (Pb,Cd) were prepared from high purity elements by melt spinning or by sequential ion implantation of the two alloying additions to achieve a total alloying addition of up to lat%. TEM observations were made using a heating stage in a 200kV electron microscope equipped with a video system for recording dynamic behavior.

Remote On-Line Control of a High-Voltage in situ Transmission Electron Microscope with A Rational User Interface

1996 ◽  
Vol 54 ◽  
pp. 384-385
Author(s):  
M.A. O’Keefe ◽  
J. Taylor ◽  
D. Owen ◽  
B. Crowley ◽  
K.H. Westmacott ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
User Interface ◽  
Transmission Electron Microscope ◽  
High Voltage ◽  
Materials Science ◽  
Transmission Electron ◽  
On Line ◽  
Electron Microscopes

Remote on-line electron microscopy is rapidly becoming more available as improvements continue to be developed in the software and hardware of interfaces and networks. Scanning electron microscopes have been driven remotely across both wide and local area networks. Initial implementations with transmission electron microscopes have targeted unique facilities like an advanced analytical electron microscope, a biological 3-D IVEM and a HVEM capable of in situ materials science applications. As implementations of on-line transmission electron microscopy become more widespread, it is essential that suitable standards be developed and followed. Two such standards have been proposed for a high-level protocol language for on-line access, and we have proposed a rational graphical user interface. The user interface we present here is based on experience gained with a full-function materials science application providing users of the National Center for Electron Microscopy with remote on-line access to a 1.5MeV Kratos EM-1500 in situ high-voltage transmission electron microscope via existing wide area networks. We have developed and implemented, and are continuing to refine, a set of tools, protocols, and interfaces to run the Kratos EM-1500 on-line for collaborative research. Computer tools for capturing and manipulating real-time video signals are integrated into a standardized user interface that may be used for remote access to any transmission electron microscope equipped with a suitable control computer.

Effect of Heat Treatment on Microstructure and Properties of Cu-3Ti-1Al Alloy

2013 ◽  
Vol 749 ◽  
pp. 282-286
Author(s):  
Xian Hui Wang ◽  
Xiao Chun Sun ◽  
Xiao Hong Yang ◽  
Shu Hua Liang
Keyword(s):  
Heat Treatment ◽  
Solid Solution ◽  
Electrical Conductivity ◽  
Electron Microscope ◽  
Treatment Process ◽  
Intermetallic Phase ◽  
Strengthening Effect ◽  
Microstructure And Properties ◽  
Optimal Heat Treatment ◽  
Transmission Electron

The effect of heat treatment on the microstructure and properties of Cu-3Ti-1Al alloy was investigated. The microstructure was characterized by scanning electron microscope (SEM) and transmission electron microscope (TEM), and the hardness and electrical conductivity were tested as well. The results showed that the hardness and electrical conductivity of Cu-3Ti-1Al alloy increased significantly after solid solution and ageing treatment. The strengthening effect of Cu-3Ti-1Al alloy was attributed to the formation of intermetallic phase such as Ti3Al and fine precipitates of coherent β-Cu4Ti. With increase of the aging time and the temperature, the precipitates became coarse and incoherent with Cu matrix, and the discontinuous precipitate β started to grow from grain boundaries toward grain interior, which decreased hardness. As the formation of Ti3Al, β-Cu3Ti and β-Cu4Ti phase can efficiently reduce Ti concentration in Cu matrix. The electrical conductivity of Cu-3Ti-1Al alloy increases. In the range of experiments, the optimal heat treatment process for Cu-3Ti-1Al alloy is solid solution at 850°C for 4h and ageing 500°C for 2h, and the hardness and electrical conductivity are 227HV and 12.3%IACS, respectively.

EFFECT OF HEAT TREATMENT ON MICROSTRUCTURE CHARACTERISTICS OF LASER COMPOSITES

2014 ◽  
Vol 21 (01) ◽  
pp. 1450014
Author(s):  
PENG LIU ◽  
YUANBIN ZHANG ◽  
YAJIANG LI ◽  
QINGQING YANG ◽  
YAN LIU ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Electron Microscope ◽  
Theoretical Basis ◽  
Laser Alloying ◽  
Wear Properties ◽  
Microstructure Characteristics ◽  
Transmission Electron ◽  
Treatment Technologies ◽  
Intensity Transfer ◽  
Scanning Electron

In this paper, effect of heat treatment on the microstructures and wear properties of laser alloying (LA) composites is investigated. LA of the T - Co 50/ FeSi / TiC / TiN / CeO 2 mixed powders on substrate of 45 steel can form the hard composites, which increased the wear resistance of substrate greatly. Such LA composites were investigated by means of a scanning electron microscope (SEM) and a transmission electron microscope (TEM). The tempering promoted the growth of the block-shape hard phases, favoring an enhancement of the integrity of block-shape hard phases; and tempering also improved greatly the formation mechanism, guarantying the composites to have enough ability of intensity transfer. This research provided essential experiment and theoretical basis to promote the application of the laser and heat treatment technologies in the field of surface modification.

scholarly journals In-Situ Stretching Patterned Graphene Nanoribbons in the Transmission Electron Microscope

2017 ◽  
Vol 7 (1) ◽  
Author(s):  
Zhongquan Liao ◽  
Leonardo Medrano Sandonas ◽  
Tao Zhang ◽  
Martin Gall ◽  
Arezoo Dianat ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Transmission Electron Microscope ◽  
Graphene Nanoribbons ◽  
Transmission Electron
Sign in / Sign up

Export Citation Format

Share Document