Fabrication of Electrochemical Ceramic Membrane with Assistance of Metallization by the Electroless-plating Technique

2002 ◽  
Vol 752 ◽  
Author(s):  
Y-Y. Liu ◽  
L. Hong ◽  
Z-C. Shao ◽  
H-X. Jiang
Keyword(s):  
Structural Integrity ◽  
Ceramic Membrane ◽  
Chemical Reduction ◽  
Dip Coating ◽  
Alloy Film ◽  
Layer By Layer ◽  
Plating Bath ◽  
Layer Deposition ◽  
Pd Alloy ◽  
Membrane Processing

ABSTRACTThis work developed a metal-reinforced ceramic membrane processing approach [by using perovskite La0.2Sr0.8 CoO3-x (LSCO-80) as the model membrane] with the aim of overcoming the membrane-cracking problem. A thin layer of Ag/Pd alloy was incorporated into the LSCO-80 membrane made by dip coating and sintering. It is not viable to obtain a Pd/Ag alloy film using the co-plating method because Ag+ ion strongly inhibits chemical reduction of Pd2+ ion, and the alkaline plating bath causes severe etching of LSCO-80. This obstacle was circumvented through a layer-by-layer deposition procedure, in which Ag and Pd layers were deposited subsequently onto LSCO membrane. The Ag and Pd layers undergo alloying when the laminar structure was subjected to calcinations at 1000°C. It was found that the Pd/Ag alloy drifts beneath into pores in the LSCO layer. The resultant metal-ceramic composite membrane shows excellent structural integrity and free of micro-cracks.

scholarly journals Highly Sensitive and Selective Colorimetric Sensor of Mercury (II) Based on Layer–by–Layer Deposition of Gold/Silver Bimetallic Nanoparticles

Molecules ◽  
2020 ◽  
Vol 25 (19) ◽  
pp. 4443
Author(s):  
Arjnarong Mathaweesansurn ◽  
Naratip Vittayakorn ◽  
Ekarat Detsri
Keyword(s):  
Bimetallic Nanoparticles ◽  
Limit Of Detection ◽  
Chemical Reduction ◽  
Colorimetric Sensor ◽  
Layer By Layer ◽  
Linear Relationships ◽  
Layer Deposition ◽  
Gold Silver ◽  
Ft Ir ◽  
Uv Visible

A new colorimetric sensor based on gold/silver bimetallic nanoparticles (Au–Ag BNPs) for the sensitive and selective detection of mercury (II) was developed. Gold nanoparticles (AuNPs) were synthesized by Turkevich method. The surface modification of AuNPs was modified by the layer–by–layer technique using poly(diallyl dimethylammonium chloride) which provided positively charged of AuNPs. Negatively charged silver nanoparticles (AgNPs) were synthesized by chemical reduction using poly(4–styrenesulfonic acid–co–maleic acid) as the stabilizing agent. The layer–by–layer assembly deposition technique was used to prepare Au–Ag BNPs of positively and negatively charged of AuNPs and AgNPs, respectively. The synthesized Au–Ag BNPs were characterized by a UV-visible spectrophotometer, zeta potential analyzer, FT–IR, TEM, XRD, and EDX. The Au–Ag BNPs sensor was able to detect mercury (II) in aqueous solution, visibly changing from brownish–orange to purple. The linear relationships of the UV-visible spectrometry demonstrate that the Au–Ag BNPs-based colorimetric sensor can be used for the quantitative analysis of mercury (II) in the range of 0.5–80 mg L−1, with the correlation coefficient, r2 = 0.9818. The limit of detection (LOD) of mercury (II) was found to be 0.526 + 0.001 mg L−1. The BNPs is also verified to have a good practical applicability for mercury (II) detection in the real samples.

Tunable Silver Leaching from Polyelectrolyte Multilayers Thin Films

2013 ◽  
Vol 701 ◽  
pp. 145-149 ◽  
Author(s):  
Sirorat Wacharanad ◽  
Stephan Thierry Dubas
Keyword(s):  
Silver Nanoparticles ◽  
Suture Material ◽  
Chemical Reduction ◽  
Layer By Layer ◽  
Capping Agent ◽  
Bacterial Reduction ◽  
Bacterial Colony ◽  
Surgical Suture ◽  
Layer Deposition ◽  
Vis Spectroscopy

Silver nanoparticles were deposited on glass slides and surgical suture as antibacterial agent. The silver nanoparticles were prepared by chemical reduction with sodium borohydride and using a synthetic polyelectrolyte as capping agent. Poly (4-styrenesulfonic acid-co-maleic acid) sodium salt PSSMA was used to stabilize the silver nanoparticles and provide an anionic surface charge which then allowed the layer-by-layer deposition method with poly (dially dimethyl ammonium chloride) PDADMAC. Various concentration of capping agent were used to prepare the silver nanoparticles which were then deposited on glass slide and surgical suture. The layer-by-layer deposition of the nanoparticles was studied using UV-Vis spectroscopy by monitoring the intensity of the characteristic Plasmon band of the nanoparticles at 400nm. The leaching of the silver nanoparticles in buffered solutions of pH 3,7 and 9 was monitored by recording the decrease in absorbance of silver nanoparticles film as a function of time for each pH solutions and each capping concentrations. Finally, suture material coated with silver nanoparticles were tested for their antibacterial activity against Staphylococcus aureus and results showed that all coated sutures had more than 99% bacterial reduction. So these suture material could be applied to use in medical products for promoted wound healing and decreased bacterial colony leading to relieve inflammation of patient.

scholarly journals Synthesis of Nanostructured Nanoclay-Zirconia Multilayers: a Feasibility Study

2008 ◽  
Vol 2008 ◽  
pp. 1-8 ◽  
Author(s):  
Hao Chen ◽  
Guoping Zhang ◽  
Kathleen Richardson ◽  
Jian Luo
Keyword(s):  
Structural Integrity ◽  
Dip Coating ◽  
Functionally Graded ◽  
Layer By Layer ◽  
Deposition Technique ◽  
X Ray ◽  
Coating Method ◽  
Potential Applications ◽  
Ultrathin Oxide Films ◽  
Dip Coating Method

This paper reports the first effort to synthesize a new class of inorganic nanostructured materials consisting of alternating ultrathin layers of nanoclays and oxide ceramics. A novel solution-based layer-by-layer (LBL) deposition technique was developed to prepare multilayers of hydrated Zr cations and nanoclays. This LBL deposition technique is devised by integrating an electrostatic-mediated dip coating method for making nanoclay-polymer multilayers with a successive ionic layer adsorption and reaction method for making ultrathin oxide films. Nanostructured clay-zirconia multilayer composites formed through subsequent annealing. Characterization by scanning electron microscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction confirmed that these films are uniform and crack-free, consist of no detectable impurities, and possess nanoscale-layered structure. The incorporation of nanoclays facilitates the electrostatic-mediated assembling of multilayers, enhances the structural integrity, and provides a generic framework to construct functionally graded materials. Potential applications are envisaged.

Layer-by-layer deposition of chitosan nanoparticles as drug-release coatings for PCL nanofibers

2019 ◽  
Vol 7 (1) ◽  
pp. 233-246 ◽  
Author(s):  
Steffen Sydow ◽  
Dominik de Cassan ◽  
Robert Hänsch ◽  
Thomas R. Gengenbach ◽  
Christopher D. Easton ◽  
...  
Keyword(s):  
Drug Release ◽  
Chitosan Nanoparticles ◽  
Dip Coating ◽  
Layer By Layer ◽  
Layer Deposition ◽  
Nanoparticle System

Modified PCL fiber mat with fluorescently labeled CS-TPP nanoparticle system via LbL dip coating.

Additive Manufacturing of a CNT/Al6Si Composite with the Nanolaminated Architecture via Cold Spray Deposition

2018 ◽  
Vol 941 ◽  
pp. 2173-2177
Author(s):  
Xin Liang Xie ◽  
Ying Chun Xie ◽  
Zhan Qiu Tan ◽  
Chao Yue Chen ◽  
Jiang Wang ◽  
...  
Keyword(s):  
Metal Matrix ◽  
Structural Integrity ◽  
Spray Deposition ◽  
Cold Spraying ◽  
Layer By Layer ◽  
Matrix Composites ◽  
Deposition Technique ◽  
Layer Deposition ◽  
Flake Powder Metallurgy ◽  
Strength And Ductility

Cold spraying (CS) is a solid-state layer-by-layer deposition technique, allowing to fabricate complex-shaped metallic components, such as metal matrix composites (MMCs). It has been demonstrated that introduction of a nacre-like nanolaminated architecture in man-made MMCs can perfectly beat the conflict between strength and ductility (toughness). In this work, the fully dense carbon nanotubes (CNTs) reinforced Al6Si (hereafter called CNT/Al6Si) MMC with the nanolaminated architecture is successfully realized by flake powder metallurgy followed by CS. It is revealed that the nanolaminated architecture, containing nanosized grains, is properly created in the CNT/Al6Si flaky powder by ball milling, which is then conserved in the CS-processed component. The harmful excessive formation of Al4C3 due to interfacial reaction is limited and structural integrity of initially incorporated CNTs is well retained.

Atomic Layer Deposition of LiF and Lithium Ion Conducting (AlF3)(LiF)x Alloys Using Trimethylaluminum, Lithium Hexamethyldisilazide and Hydrogen Fluoride

2017 ◽  
Author(s):  
Younghee Lee ◽  
Daniela M. Piper ◽  
Andrew S. Cavanagh ◽  
Matthias J. Young ◽  
Se-Hee Lee ◽  
...  
Keyword(s):  
Lithium Ion ◽  
Atomic Layer ◽  
Mass Gain ◽  
Alloy Film ◽  
Ex Situ ◽  
X Ray ◽  
Layer Deposition ◽  
Ion Conducting ◽  
Good Agreement

<div>Atomic layer deposition (ALD) of LiF and lithium ion conducting (AlF<sub>3</sub>)(LiF)<sub>x</sub> alloys was developed using trimethylaluminum, lithium hexamethyldisilazide (LiHMDS) and hydrogen fluoride derived from HF-pyridine solution. ALD of LiF was studied using in situ quartz crystal microbalance (QCM) and in situ quadrupole mass spectrometer (QMS) at reaction temperatures between 125°C and 250°C. A mass gain per cycle of 12 ng/(cm<sup>2</sup> cycle) was obtained from QCM measurements at 150°C and decreased at higher temperatures. QMS detected FSi(CH<sub>3</sub>)<sub>3</sub> as a reaction byproduct instead of HMDS at 150°C. LiF ALD showed self-limiting behavior. Ex situ measurements using X-ray reflectivity (XRR) and spectroscopic ellipsometry (SE) showed a growth rate of 0.5-0.6 Å/cycle, in good agreement with the in situ QCM measurements.</div><div>ALD of lithium ion conducting (AlF3)(LiF)x alloys was also demonstrated using in situ QCM and in situ QMS at reaction temperatures at 150°C A mass gain per sequence of 22 ng/(cm<sup>2</sup> cycle) was obtained from QCM measurements at 150°C. Ex situ measurements using XRR and SE showed a linear growth rate of 0.9 Å/sequence, in good agreement with the in situ QCM measurements. Stoichiometry between AlF<sub>3</sub> and LiF by QCM experiment was calculated to 1:2.8. XPS showed LiF film consist of lithium and fluorine. XPS also showed (AlF<sub>3</sub>)(LiF)x alloy consists of aluminum, lithium and fluorine. Carbon, oxygen, and nitrogen impurities were both below the detection limit of XPS. Grazing incidence X-ray diffraction (GIXRD) observed that LiF and (AlF<sub>3</sub>)(LiF)<sub>x</sub> alloy film have crystalline structures. Inductively coupled plasma mass spectrometry (ICP-MS) and ionic chromatography revealed atomic ratio of Li:F=1:1.1 and Al:Li:F=1:2.7: 5.4 for (AlF<sub>3</sub>)(LiF)<sub>x</sub> alloy film. These atomic ratios were consistent with the calculation from QCM experiments. Finally, lithium ion conductivity (AlF<sub>3</sub>)(LiF)<sub>x</sub> alloy film was measured as σ = 7.5 × 10<sup>-6</sup> S/cm.</div>

Radical-triggered cross-linking for molecular layer deposition of SiAlCOH hybrid thin films

2021 ◽  
Author(s):  
Kristina Ashurbekova ◽  
Karina Ashurbekova ◽  
Iva Saric ◽  
Evgeny Modin ◽  
Mladen Petravic ◽  
...  
Keyword(s):  
Thin Film ◽  
Film Growth ◽  
Molecular Layer ◽  
Thin Film Growth ◽  
Cross Linking ◽  
Layer By Layer ◽  
Molecular Layer Deposition ◽  
Layer Deposition ◽  
Hybrid Thin Films ◽  
Enhanced Stability

We developed a thin film growth with a radical-initiated cross-linking of vinyl groups in a layer-by-layer manner via molecular layer deposition (MLD). The cross-linked film exhibited improved properties like 12% higher density and enhanced stability compared to the non-cross-linked film.

All-nanoparticle layer-by-layer coatings for Mid-IR on-chip gas sensing

2020 ◽  
Vol 56 (91) ◽  
pp. 14283-14286
Author(s):  
Diana Al Husseini ◽  
Junchao Zhou ◽  
Daniel Willhelm ◽  
Trevor Hastings ◽  
Gregory S. Day ◽  
...  
Keyword(s):  
Optical Waveguides ◽  
Gas Sensing ◽  
Layer By Layer ◽  
Precise Control ◽  
Nanoparticle Layer ◽  
Withdrawal Speed ◽  
Layer Deposition ◽  
Nanoparticle Coatings ◽  
On Chip

Functionalization of optical waveguides with submicron all-nanoparticle coatings significantly enhanced the detection of acetone. Such coatings were enabled via precise control of the substrate withdrawal speed using the layer-by-layer deposition.

Sign in / Sign up

Export Citation Format

Share Document