Effect of Process Variables and Dopants on Characteristics of Electrochemically-Deposited Pedot Films

2002 ◽  
Vol 736 ◽  
Author(s):  
Mihir A. Oka ◽  
Stephen S. Hardaker ◽  
Farzad Nazir ◽  
Richard V. Gregory ◽  
Keith R. Brenneman ◽  
...  
Keyword(s):  
Electrode Materials ◽  
Morphological Structure ◽  
Constant Current ◽  
Process Variables ◽  
Residual Solvent ◽  
Force Microscopy ◽  
Atomic Force ◽  
Electrochemically Deposited ◽  
Relationship Of ◽  
The Relationship

ABSTRACTPoly(3,4-ethlyenedioxythiophene), PEDOT, has found wide use in applications such as electrostatic coatings, antistatic layers and electrode materials in electronic devices. Electrochemical deposition of PEDOT is a prominent means of obtaining thin, uniform films. However, the relationship of these films' properties to their morphological structure is still poorly understood. We have prepared PEDOT films by electrochemical oxidation of monomer (3,4-ethylenedioxythiophene), EDOT, under constant current conditions, employing a variety of electrolytes, and processing conditions. We report the effect of using different dopants, deposition time, deposition temperature and current density on the observed conductivity of PEDOT films. Atomic force microscopy studies were carried out to determine the possible effect of the process variables on the resulting film morphology. Also, the effect of residual solvent on the conductivity of the films was studied by thermogravimetric analysis (TGA).

Surface Morphology of SiGe Epitaxial Layers Grown on Uniquely Oriented Si Substrates

2000 ◽  
Vol 648 ◽  
Author(s):  
Morgan E. Ware ◽  
Robert J. Nemanich
Keyword(s):  
Surface Morphology ◽  
Lattice Mismatch ◽  
Morphological Structure ◽  
Epitaxial Layers ◽  
Misfit Dislocations ◽  
Force Microscopy ◽  
Si Substrates ◽  
Atomic Force ◽  
Transmission Electron ◽  
Relationship Of

AbstractThe 4% lattice mismatch between Si and Ge creates strain in epitaxial layers of SiGe alloys on Si, and this strain can manifest itself in the morphological structure of the surface of the epitaxial layer. This study explores the relationship of the evolution of the surface morphology of SiGe layers grown on a range of Si surface orientations. We have grown thin, strained and thick, relaxed layers of Si0.7Ge0.3 by solid source molecular beam epitaxy on substrates with surface normals rotated from [001] towards [111] by angles of θ = (0, 2, 4, 10, 22) degrees. The surface morphology was investigated by atomic force microscopy, which showed considerable ordering of surface features on relaxed samples. These features evolve from hut-like structures at 0 degrees to large mesa-like structures separated by pits and crevices at 22 degrees. The organization of these features is also shown to vary with the substrate orientation. Each surface has characteristic directions along which features are aligned, and these directions vary continuously with the angle of rotation of the substrate. Transmission electron microscopy confirmed that misfit dislocations had formed along those same directions. The state of relaxation of each layer is quantified by Raman spectroscopy in order to make a direct correlation between residual strain and surface morphology.

Photochemical Reactivity of Sr2Nb2O7 and Sr2Ta2O7 as a Function of Surface Orientation

2002 ◽  
Vol 755 ◽  
Author(s):  
Jennifer L. Giocondi ◽  
Ariana M. Zimbouski ◽  
Gregory S. Rohrer
Keyword(s):  
Perovskite Structure ◽  
Orientation Dependence ◽  
Layered Perovskite ◽  
Reaction Products ◽  
Force Microscopy ◽  
Atomic Force ◽  
Wide Range ◽  
Layered Perovskite Structure ◽  
Relationship Of ◽  
The Relationship

ABSTRACTSr2Nb2O7 and Sr2Ta2O7 have a (110) layered perovskite structure and are efficient photolysis catalysts. Aqueous silver and lead cations were photochemically reduced and oxidized, respectively, on the surfaces of Sr2Nb2O7 and Sr2Ta2O7 crystals with a wide range of orientations. Atomic force microscopy has been used to observe the distribution of photochemically reduced and oxidized products and determine the orientation dependence of the reactivity. On surfaces with the same orientation, reaction products frequently had a non-uniform distribution. The reactivity of both compounds proved to be only weakly anisotropic, with the highest relative reactivity for both oxidation and reduction occurring for surfaces oriented between (010), (110), and (011). These low index orientations have structures similar to the ideal {110} and {100} planes in the perovskite structure, respectively. The relationship of the perovskite structure to the reactivity is discussed.

HIV infection changes glomerular podocyte cytoskeletal composition and results in distinct cellular mechanical properties

2007 ◽  
Vol 292 (2) ◽  
pp. F701-F710 ◽  
Author(s):  
R. Tandon ◽  
I. Levental ◽  
C. Huang ◽  
F. J. Byfield ◽  
J. Ziembicki ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Mechanical Characteristics ◽  
Stress Fibers ◽  
Wild Type ◽  
Force Microscopy ◽  
Hemodynamic Forces ◽  
Filtration Barrier ◽  
Atomic Force ◽  
Relationship Of ◽  
The Relationship

In addition to forming the selective filtration barrier for the renal glomerulus, podocytes maintain glomerular capillary architecture by opposing distending hemodynamic forces. To understand the relationship of cytoskeletal properties and the mechanical characteristics of podocytes, we studied filamin expression and distribution and measured cell membrane deformability in conditionally immortalized wild-type (WT) mouse podocytes, and in podocytes derived from a mouse model of HIV-associated nephropathy (HIVAN). In the WT cells, filamin and F-actin were localized at the periphery and in prominent stress fibers. In the HIVAN cells, filamin expression was reduced, and stress fibers were sparse. In a microaspiration assay, HIVAN cells ruptured under minimal negative pressure. Atomic force microscopy demonstrated that the WT cells had a stiffness of 17 kPa, whereas the value for the HIVAN cells was 4 kPa. These results demonstrate that the mechanical properties of WT and HIVAN podocytes are markedly different in a manner that is consistent with differences in the composition and arrangement of their cytoskeletons. The mechanical properties of the WT podocytes suggest that these cells can better maintain capillary integrity than the HIVAN podocytes and implicate pathological assembly of the cytoskeleton as a mechanism of HIVAN.

scholarly journals Synthesis and Properties of Novel Polyurethanes Containing Long-Segment Fluorinated Chain Extenders

Polymers ◽  
2018 ◽  
Vol 10 (11) ◽  
pp. 1292 ◽  
Author(s):  
Jia-Wun Li ◽  
Hsun-Tsing Lee ◽  
Hui-An Tsai ◽  
Maw-Cherng Suen ◽  
Chih-Wei Chiu
Keyword(s):  
Hard Segment ◽  
Soft Segment ◽  
Mechanical Analysis ◽  
Chain Extender ◽  
Scanning Calorimetry ◽  
Force Microscopy ◽  
Atomic Force ◽  
Chain Extenders ◽  
Relationship Of ◽  
The Relationship

In this study, novel biodegradable long-segment fluorine-containing polyurethane (PU) was synthesized using 4,4′-diphenylmethane diisocyanate (MDI) and 1H,1H,10H,10H-perfluor-1,10-decanediol (PFD) as hard segment, and polycaprolactone diol (PCL) as a biodegradable soft segment. Nuclear magnetic resonance (NMR) was used to perform 1H NMR, 19F NMR, 19F–19F COSY, 1H–19F COSY, and HMBC analyses on the PFD/PU structures. The results, together with those from Fourier transform infrared spectroscopy (FTIR), verified that the PFD/PUs had been successfully synthesized. Additionally, the soft segment and PFD were changed, after which FTIR and XPS peak-differentiation-imitating analyses were employed to examine the relationship of the hydrogen bonding reaction between the PFD chain extender and PU. Subsequently, atomic force microscopy was used to investigate the changes in the microphase structure between the PFD chain extender and PU, after which the effects of the thermal properties between them were investigated through thermogravimetric analysis, differential scanning calorimetry, and dynamic mechanical analysis. Finally, the effects of the PFD chain extender on the mechanical properties of the PU were investigated through a tensile strength test.

EFFECT OF ETCHING TIME ON OPTICAL AND MORPHOLOGICAL FEATURES OF N-TYPE POROUS SILICON PREPARED BY PHOTO-ELECTROCHEMICAL METHOD

2016 ◽  
Vol 78 (3) ◽  
Author(s):  
Asad A. Thahe ◽  
Noriah Bidin ◽  
Mohammed A. Al-Azawi ◽  
Naser M. Ahmed
Keyword(s):  
Porous Silicon ◽  
Gravimetric Method ◽  
Constant Current ◽  
Etching Time ◽  
Absorption Data ◽  
Time Duration ◽  
Constant Current Density ◽  
Force Microscopy ◽  
Atomic Force ◽  
Structure Properties

Achieving efficient visible photoluminescence from porous-silicon (PSi) is demanding for optoelectronic and solar cells applications. Improving the absorption and emission features of PSi is challenging. Photo-electro-chemical etching assisted formation of PSi layers on n-type (111) silicon (Si) wafers is reported. Samples are prepared at constant current density (~30 mA/cm2) under varying etching times of 10, 15, 20, 25, and 30 min. The influence of etching time duration on the growth morphology and spectral properties are inspected. Room temperature photoluminescence (PL) measurement is performed to determine the optical properties of as-synthesized samples. Sample morphologies are imaged via Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). The thickness and porosity of the prepared samples are estimated using the gravimetric method. The emission and absorption data is further used to determine the samples band gap and electronic structure properties. Results and analyzed, interpreted with different mechanisms and compared.  

High-resolution transmission electron microscopic investigations of molybdenum thin films on faceted α-Al2O3

2005 ◽  
Vol 38 (2) ◽  
pp. 260-265 ◽  
Author(s):  
Leonore Wiehl ◽  
Jens Oster ◽  
Michael Huth
Keyword(s):  
High Resolution ◽  
Three Dimensional ◽  
Epitaxial Relationship ◽  
Electron Microscopic ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
High Resolution Images ◽  
Α Al2o3 ◽  
Relationship Of

Epitaxially grown Mo films on a faceted corundum (α-Al2O3)mplane were investigated by transmission electron microscopy. Low- and high-resolution images were taken from a cross-section specimen cut perpendicular to the facets. It was possible to identify unambiguously the crystallographic orientation of these facets and explain the considerable deviation (∼10°) of the experimental interfacet angle, as measured with atomic force microscopy (AFM), from the expected value. For the first time, proof is given for a smooth \{10\bar{1}1\} facet and a curvy facet with orientation near to \{10\bar{1}\bar{2}\}. Moreover, the three-dimensional epitaxial relationship of an Mo film on a faceted corundummsurface was determined.

Study on Surface Roughness Based on Dynamic Minimum Thickness of Cut

2011 ◽  
Vol 88-89 ◽  
pp. 34-37
Author(s):  
Kuai Ji Cai
Keyword(s):  
Surface Roughness ◽  
Friction Coefficient ◽  
Atomic Force Microscope ◽  
Surface Quality ◽  
Experimental Verification ◽  
Cutting Parameters ◽  
Minimum Thickness ◽  
Atomic Force ◽  
Relationship Of ◽  
The Relationship

The relationship of the friction coefficient and the MTC were discussed, and the MTC and its effects on surface roughness were a theoretical analysised and experimental verification by AFM (atomic force microscope). The results show that the theoretical MTC tends to be minimal value then before the adhering effect to reach remarkable. Appropriate adjustments cutting parameters, the cutting process can always micro-cutting phase to reach the steady-thin chip, and no plowing phenomenon. So the surface residues highly were reduced and higher surface quality was achieved.

Direct Writing on Phosphate Glass Using Atomic Force Microscopy for Rapid Fabrication of Nanostructures

2016 ◽  
Author(s):  
Shama F. Barna ◽  
Kyle E. Jacobs ◽  
Glennys A. Mensing ◽  
Placid M. Ferreira
Keyword(s):  
Atomic Force Microscopy ◽  
Ion Beam ◽  
Soft Materials ◽  
Constant Current ◽  
Silver Nanostructures ◽  
Direct Writing ◽  
Ambient Conditions ◽  
Commercial Development ◽  
Force Microscopy ◽  
Atomic Force

Rapid and cost effective fabrication of nanostructures is critical for experimental exploration and translation of results for commercial development. While conventional techniques such as E-beam or Focused Ion beam lithography serve some prototyping needs for nano-scale experimentations, cost and rate considerations prohibit use for manufacturing. Specialized lithographic processes [e.g. nanosphere lithography or interference lithography] are also powerful tools in creating nanostructures but provide limited shapes, positioning and size control of nanostructures. In this work, we demonstrated a liquid-free and mask-less electrochemical writing approach using atomic force microscopy (AFM) that is capable of making arbitrary shapes of silver nanostructures in seconds on a solid state super-ionic (AgI)x (AgPO3)(1−x) glass. Under ambient conditions. silver is extracted selectively on super-ionic (AgI)x (AgPO3)(1−x) glass surface by negatively biasing an AFM probe relative to an Ag film counter electrode. Both voltage controlled and current controlled writings demonstrated localized extraction of silver. The current controlled approach is shown to be the preferred writing approach to make repeatable and uniform patterns of silver on (AgI)x AgPO3(1−x), where x represents the mole fraction of AgI in the mixture and the control parameter that tunes the conductivity of the sample. We demonstrated current controlled printing of silver on two different compositions of the material (i.e. (AgI)0.125 (AgPO3 )0.875 and (AgI)0.25(AgPO3)0.75 ). Depending on the magnitude of the constant current and tip speed, line-width of the silver pattern can be ∼150 nm. The length of these patterns are limited to the maximum distance the tip can be moved using the AFM position controls. The substrate being optically transparent allows the use of this writing technique for rapid prototyping plasmonic devices. By using the patterned substrate as a template for replica molding of soft materials such as polydimethylsiloxane (PDMS), this writing technique can also be utilized for high throughput nano-channel fabrication in biofluidics and microfluidics devices.

scholarly journals Isotropic microscale mechanical properties of coral skeletons

2015 ◽  
Vol 12 (106) ◽  
pp. 20150168 ◽  
Author(s):  
Luca Pasquini ◽  
Alan Molinari ◽  
Paola Fantazzini ◽  
Yannicke Dauphen ◽  
Jean-Pierre Cuif ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Nacreous Layer ◽  
X Ray Diffraction ◽  
Stylophora Pistillata ◽  
Force Microscopy ◽  
Coral Skeletons ◽  
Atomic Force ◽  
Diffraction Patterns ◽  
The Relationship ◽  
Atrina Rigida

Scleractinian corals are a major source of biogenic calcium carbonate, yet the relationship between their skeletal microstructure and mechanical properties has been scarcely studied. In this work, the skeletons of two coral species: solitary Balanophyllia europaea and colonial Stylophora pistillata , were investigated by nanoindentation. The hardness H IT and Young's modulus E IT were determined from the analysis of several load–depth data on two perpendicular sections of the skeletons: longitudinal (parallel to the main growth axis) and transverse. Within the experimental and statistical uncertainty, the average values of the mechanical parameters are independent on the section's orientation. The hydration state of the skeletons did not affect the mechanical properties. The measured values, E IT in the 76–77 GPa range, and H IT in the 4.9–5.1 GPa range, are close to the ones expected for polycrystalline pure aragonite. Notably, a small difference in H IT is observed between the species. Different from corals, single-crystal aragonite and the nacreous layer of the seashell Atrina rigida exhibit clearly orientation-dependent mechanical properties. The homogeneous and isotropic mechanical behaviour of the coral skeletons at the microscale is correlated with the microstructure, observed by electron microscopy and atomic force microscopy, and with the X-ray diffraction patterns of the longitudinal and transverse sections.

Sign in / Sign up

Export Citation Format

Share Document