Mechanical Reliability of Z5u Multilayer Capacitors

1986 ◽  
Vol 72 ◽  
Author(s):  
Kelly D. Mchenry ◽  
Barry G. Koepke
Keyword(s):  
Fracture Mechanics ◽  
Fracture Behavior ◽  
Size Range ◽  
Post Mortem ◽  
Mechanical Reliability ◽  
Fatigue Data ◽  
Processing Defects ◽  
Multilayer Capacitors ◽  
Wide Size Range ◽  
Dynamic Fatigue

AbstractDynamic fatigue experiments were performed on Z5U multilayer capacitors in an attempt to correlate microflaw fracture behavior due to intrinsic processing defects within the material with predictions of fracture behavior based on macrocrack fracture mechanics determinations. A direct correlation between microflaw fracture behavior and predictions based upon macrocrack fracture mechanics techniques was not observable due to the wide size range of processing defects. A systematic post-mortem examination of fracture surfaces was used to identify fracture origins and sort individual test specimens into groups with equivalent flaw sizes. The correlation between microflaw and macrocrack fracture behavior became more “sorting” the dynamic fatigue data into groups withm oereq uoibvvailoeunst aflfatwer sizes.

Fracture Toughness Testing and its Implications to Engineering Fracture Mechanics Analysis of Energy Pipelines

2018 ◽  
Author(s):  
Sergio Limon ◽  
Peter Martin ◽  
Mike Barnum ◽  
Robert Pilarczyk
Keyword(s):  
Fracture Toughness ◽  
Fracture Mechanics ◽  
Test Data ◽  
Fracture Mode ◽  
Fracture Process ◽  
Fracture Behavior ◽  
Fracture Initiation ◽  
Fracture Toughness Testing ◽  
Final Fracture ◽  
Toughness Testing

The fracture process of energy pipelines can be described in terms of fracture initiation, stable fracture propagation and final fracture or fracture arrest. Each of these stages, and the final fracture mode (leak or rupture), are directly impacted by the tendency towards brittle or ductile behavior that line pipe steels have the capacity to exhibit. Vintage and modern low carbon steels, such as those used to manufacture energy pipelines, exhibit a temperature-dependent transition from ductile-to-brittle behavior that affects the fracture behavior. There are numerous definitions of fracture toughness in common usage, depending on the stage of the fracture process and the behavior or fracture mode being evaluated. The most commonly used definitions in engineering fracture analysis of pipelines with cracks or long-seam weld defects are related to fracture initiation, stable propagation or final fracture. When choosing fracture toughness test data for use in engineering Fracture Mechanics-based assessments of energy pipelines, it is important to identify the stage of the fracture process and the expected fracture behavior in order to appropriately select test data that represent equivalent conditions. A mismatch between the physical fracture event being modeled and the chosen experimental fracture toughness data can result in unreliable predictions or overly conservative results. This paper presents a description of the physical fracture process, behavior and failure modes that pipelines commonly exhibit as they relate to fracture toughness testing, and their implications when evaluating cracks and cracks-like features in pipelines. Because pipeline operators, and practitioners of engineering Fracture Mechanics analyses, are often faced with the challenge of only having Charpy fracture toughness available, this paper also presents a review of the various correlations of Charpy toughness data to fracture toughness data expressed in terms of KIC or JIC. Considerations with the selection of an appropriate correlation for determining the failure pressure of pipelines in the presence of cracks and long-seam weld anomalies will be discussed.

Fracture Behavior of Ceramics Used in Multilayer Capacitors

1986 ◽  
Vol 72 ◽  
Author(s):  
Theresa L. Baker ◽  
Stephen W. Freiman
Keyword(s):  
Crack Growth ◽  
Fracture Behavior ◽  
Ceramic Materials ◽  
Fatigue Tests ◽  
Internal Stresses ◽  
Crack Growth Behavior ◽  
Multilayer Capacitors ◽  
Materials Used ◽  
Aging Phenomena

AbstractThis study involved the determination of the effects of composition and microstructure on the fracture toughness and susceptibility to environmentally enhanced crack growth of several ceramic materials used in multilayer capacitors. Indentation-fracture procedures were used to measure KIC as well as to assess the possible effects of internal stresses on the fracture behavior of these materials and to correlate dielectric aging phenomena with strength. The environmentally enhanced crack growth behavior of these materials was determined by conducting dynamic fatigue tests in water.

A Comparison of Fracture Mechanics and S–N Curve Approaches in Designing Drill Pipe

1992 ◽  
Vol 114 (3) ◽  
pp. 205-211 ◽  
Author(s):  
A. Ertas ◽  
G. Mustafa ◽  
O. Cuvalci
Keyword(s):  
Fracture Mechanics ◽  
Fatigue Damage ◽  
Drill Pipe ◽  
Ball Joint ◽  
Marine Riser ◽  
Deep Drilling ◽  
Miner’S Rule ◽  
Miner's Rule ◽  
Total Damage ◽  
Dynamic Fatigue

It is well known that the upper ball joint in a marine riser, in deep drilling, can cause fatigue damage in the drill pipe passing through it. A study of fracture mechanics and S–N curve approaches has been undertaken to determine the dynamic fatigue damage in the drill pipe. Miner’s rule is utilized in both methods to determine the total damage. The results of both methods are compared.

The Mechanism of active capture of animal food by the Sergestid Shrimp Acetes Sibogae Australis

1998 ◽  
Vol 78 (2) ◽  
pp. 497-508 ◽  
Author(s):  
Lachlan Mcleay ◽  
C.G. Alexander
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Prey Capture ◽  
Size Range ◽  
The Third ◽  
Feeding Modes ◽  
In Captivity ◽  
Combined Actions ◽  
Wide Size Range ◽  
Scanning Electron

Combining the use of scanning electron microscopy and microcinematography with functional and behavioural observations has clarified many aspects underlying the feeding processes of the small planktonic sergestid shrimp Acetes sibogae australis. In captivity Acetes sibogae australis is an opportunistic feeder that uses four principal feeding modes to capture a wide size range of prey: Artemia nauplii (<0.33 mm), copepods (<1mm) and moribund Acetes (up to 25 mm). Prey capture is effected by combined actions of the first three pairs of pereiopods and the third maxillipeds before transfer to the more dorsal second maxillipeds. The second maxillipeds are the principal appendages used in securing, manipulating, sorting and rejecting prey before insertion into the vicinity of the inner mouthparts.

Fracture Behavior and Tensile Adhesive Properties of HA Coatings

1997 ◽  
Author(s):  
K.A. Khor ◽  
P. Cheang
Keyword(s):  
Bond Strength ◽  
Fracture Behavior ◽  
Size Range ◽  
Deposition Process ◽  
Adhesive Properties ◽  
Particle Size Range ◽  
Powder Morphology ◽  
Bioactive Properties ◽  
Accurate Comparison ◽  
Plasma Sprayed

Abstract The attractive bioactive properties of HA are significantly reduced upon plasma spraying because of the phase transformation that accompanied the deposition process. One major factor that influence the extent to which the transformation occur appears to be the morphology and physical states of the HA raw powders. This paper reports the study on the influence of powder morphology and property on the fracture behaviour and tensile adhesive strength of plasma sprayed HA coatings. Three types of powders were used in the study; calcined HA (CHA), spray dried HA (SDHA) and flame spheroidised HA (SHA). The particle size range of 53 - 75 μm was employed for all 3 types of powders to effect an accurate comparison of the powders. Results show that the cohesive bond strength of the SHA coating was the highest because of the denser microstructure created by well-formed lamella splats. A correspondingly lower bond strength was recorded with less coherent coatings generated by agglomerated CHA and SDHA powders.

The effect of oleic acid on the synthesis of Fe3−xO4 nanoparticles over a wide size range

2015 ◽  
Vol 17 (41) ◽  
pp. 27373-27379 ◽  
Author(s):  
Carlos Moya ◽  
Xavier Batlle ◽  
Amílcar Labarta
Keyword(s):  
Thermal Decomposition ◽  
Oleic Acid ◽  
Structural Properties ◽  
Acid Concentration ◽  
Size Range ◽  
Benzyl Ether ◽  
Oleic Acid Concentration ◽  
Wide Size Range

This work reports on the effect of the oleic acid concentration on the magnetic and structural properties of Fe3−xO4 nanoparticles synthesized by thermal decomposition of Fe(acac)3 in benzyl-ether.

Production, Characterization, and Deposition of Carbon Clusters

1990 ◽  
Vol 206 ◽  
Author(s):  
Y. K. Bae ◽  
D. C. Lorents ◽  
R. Malhotra ◽  
C. H. Becker ◽  
D. Tse ◽  
...  
Keyword(s):  
High Temperatures ◽  
Thermal Desorption ◽  
Size Range ◽  
Ion Source ◽  
Carbon Clusters ◽  
Heating Process ◽  
Cluster Ion Source ◽  
Semiconductor Clusters ◽  
Cluster Ion ◽  
Wide Size Range

ABSTRACTWe have developed a new cluster ion source that can generate intense beams of metal and semiconductor clusters of a very wide-size range. With the source, we have observed intense beams of carbon clusters with mean cluster sizes of up to 4000 atoms/clusters. However, we have found that for generating small fullerenes, such as C60 and C70, the recently discovered technique by Kraetschmer et al. is much more efficient. By improving the technique, we have generated gram quantities of C60 and C70 and systematically investigated their thermal desorption properties. During the heating process, we have discovered that at high temperatures the bulk fullerenes, fullerite, transformed to another form of carbon, which still evaporates at temperatures above 700 C, but does not dissolve in benzene.

Sign in / Sign up

Export Citation Format

Share Document