Colloidal Silica Films as Substrates for High Density DNA Arrays

2000 ◽  
Vol 628 ◽  
Author(s):  
M. Glazer ◽  
C. Frank ◽  
J. Lussi ◽  
J. Fidanza ◽  
G. Mcgall
Keyword(s):  
Colloidal Silica ◽  
Functional Performance ◽  
High Surface ◽  
High Surface Area ◽  
Dna Arrays ◽  
Silica Films ◽  
Film Polymer ◽  
Lateral Area ◽  
Polymer Latex ◽  
Templating Technique

ABSTRACTTwo processes for depositing colloidal silica films that can be used as high surface area substrates for DNA arrays are presented. The films boost the hybridization signal above that obtainable from the same lateral area of a “flat” array. In the first process, colloidal silica is deposited directly from solution. In the second, a templating technique is introduced to give added control over the pore size and porosity of the film. Polymer latex is co -deposited with the silica and then pyrolyzed, resulting in larger pores and higher porosity. Both types of films are tested for functional performance with DNA arrays and show promising results.

scholarly journals Experimental Investigation into the Structural and Functional Performance of Graphene Nano-Platelet (GNP)-Doped Asphalt

2019 ◽  
Vol 9 (4) ◽  
pp. 686 ◽  
Author(s):  
Murryam Hafeez ◽  
Naveed Ahmad ◽  
Mumtaz Kamal ◽  
Javaria Rafi ◽  
Muhammad Haq ◽  
...  
Keyword(s):  
Functional Performance ◽  
Permanent Deformation ◽  
High Surface ◽  
Asphalt Binder ◽  
High Surface Area ◽  
Adhesive Bond ◽  
Structural Performance ◽  
Complete Analysis ◽  
Skid Resistance ◽  
Sem Images

With the increase in the demand for bitumen, it has become essential for pavement engineers to ensure that construction of sustainable pavements occurs. For a complete analysis of the pavement, both its structural and functional performances are considered. In this study, a novel material (i.e., Graphene Nano-Platelets (GNPs)) has been used to enhance both of the types of pavements’ performances. Two percentages of GNPs (i.e., 2% and 4% by the weight of the binder) were used for the modification of asphalt binder in order to achieve the desired Performance Grade. GNPs were homogeneously dispersed in the asphalt binder, which was validated by Scanning Electron Microscope (SEM) images and a Hot Storage Stability Test. To analyze the structural performance of the GNPs-doped asphalt, its rheology, resistance to permanent deformation, resistance to moisture damage, and bitumen-aggregate adhesive bond strength were studied. For the analysis of the functional performance, the skid resistance and polishing effect were studied using a British Pendulum Skid Resistance Tester. The results showed that GNPs improved not only the rutting resistance of the pavement but also its durability. The high surface area of GNPs increases the pavement’s bonding strength and makes the asphalt binder stiffer. GNPs also provide nano-texture to the pavement, which enhances its skid resistance. Thus, we can recommend GNPs as an all-around modifier that could improve not only the structural performance but also the functional performance of asphalt pavements.

Preparation and Processing of Monodisperse Colloidal Silica-Cadmium sulfide nanocomposites

1994 ◽  
Vol 346 ◽  
Author(s):  
Song-Yuan Chang ◽  
Lei Liu ◽  
Sanford A. Asher
Keyword(s):  
Cadmium Sulfide ◽  
Surface Area ◽  
Colloidal Silica ◽  
High Surface ◽  
High Surface Area ◽  
Reaction Medium ◽  
Silica Particles ◽  
Linear Optics ◽  
Silica Colloids ◽  
Monodisperse Colloidal Silica

ABSTRACTA novel synthetic methodology has been developed for preparing monodisperse colloidal silica-cadmium sulfide nanocomposite spheres in the 50 – 300 nm size regime. This methodology uses water-in-oil microemulsions as the reaction medium. Monosize silica colloids are first produced by the controlled hydrolysis of tetraethyl orthosilicate in the micro water droplets of the microemulsion. Cadmium sulfide quantum dots are incorporated into the silica colloids during synthesis by the introductions of Cd2+ and S2- microemulsions. Various morphologies of the nanocomposite are fabricated by controlling the heterogeneous coagulation of CdS and SiO2. Unique high surface area silica particles can be prepared when nitric acid etches out the CdS and leaves behind topologically defined voids. The CdS nanocomposites are new materials useful for non-linear optics, while the high surface area silica particles should have novel applications in areas such as catalysis.

In Situ microscopy of the anodic etching of silicon

1995 ◽  
Vol 53 ◽  
pp. 232-233
Author(s):  
Frances M. Ross ◽  
Peter C. Searson
Keyword(s):  
Composite Structures ◽  
High Surface ◽  
High Surface Area ◽  
Chemical Properties ◽  
Selective Etching ◽  
Silicon On Insulator ◽  
Second Phase ◽  
Porous Layers ◽  
New Class ◽  
Porous Semiconductors

Porous semiconductors represent a relatively new class of materials formed by the selective etching of a single or polycrystalline substrate. Although porous silicon has received considerable attention due to its novel optical properties1, porous layers can be formed in other semiconductors such as GaAs and GaP. These materials are characterised by very high surface area and by electrical, optical and chemical properties that may differ considerably from bulk. The properties depend on the pore morphology, which can be controlled by adjusting the processing conditions and the dopant concentration. A number of novel structures can be fabricated using selective etching. For example, self-supporting membranes can be made by growing pores through a wafer, films with modulated pore structure can be fabricated by varying the applied potential during growth, composite structures can be prepared by depositing a second phase into the pores and silicon-on-insulator structures can be formed by oxidising a buried porous layer. In all these applications the ability to grow nanostructures controllably is critical.

Electron holography of catalysts

1995 ◽  
Vol 53 ◽  
pp. 416-417
Author(s):  
A. K. Datye ◽  
D. S. Kalakkad ◽  
L. F. Allard ◽  
E. Völkl
Keyword(s):  
Heterogeneous Catalysts ◽  
High Surface ◽  
High Surface Area ◽  
Atomic Scale ◽  
Nano Particles ◽  
Phase Image ◽  
Electron Holography ◽  
Specimen Thickness ◽  
Phase Information ◽  
Particle Structure

The active phase in heterogeneous catalysts consists of nanometer-sized metal or oxide particles dispersed within the tortuous pore structure of a high surface area matrix. Such catalysts are extensively used for controlling emissions from automobile exhausts or in industrial processes such as the refining of crude oil to produce gasoline. The morphology of these nano-particles is of great interest to catalytic chemists since it affects the activity and selectivity for a class of reactions known as structure-sensitive reactions. In this paper, we describe some of the challenges in the study of heterogeneous catalysts, and provide examples of how electron holography can help in extracting details of particle structure and morphology on an atomic scale.Conventional high-resolution TEM imaging methods permit the image intensity to be recorded, but the phase information in the complex image wave is lost. However, it is the phase information which is sensitive at the atomic scale to changes in specimen thickness and composition, and thus analysis of the phase image can yield important information on morphological details at the nanometer level.

Structure and composition of metal particles in Pt-Sn/Al2O3 bimetallic catalysts

1990 ◽  
Vol 48 (4) ◽  
pp. 278-279
Author(s):  
A. Sachdev ◽  
J. Schwank
Keyword(s):  
Bimetallic Catalysts ◽  
Bimetallic Catalyst ◽  
Size Structure ◽  
High Surface ◽  
High Surface Area ◽  
Metal Particles ◽  
Alloy Formation ◽  
Particle Size Range ◽  
Oxide Supports ◽  
Petroleum Fractions

Platinum - tin bimetallic catalysts have been primarily utilized in the chemical industry in the catalytic reforming of petroleum fractions. In this process the naphtha feedstock is converted to hydrocarbons with higher octane numbers and high anti-knock qualities. Most of these catalysts contain small metal particles or crystallites supported on high surface area insulating oxide supports. The determination of the structure and composition of these particles is crucial to the understanding of the catalytic behavior. In a bimetallic catalyst it is important to know how the two metals are distributed within the particle size range and in what way the addition of a second metal affects the size, structure and composition of the metal particles. An added complication in the Pt-Sn system is the possibility of alloy formation between the two elements for all atomic ratios.

Intercalation of First Row Transition Metals inside Covalent-Organic Frameworks (COF): a Strategy to Fine Tune the Electronic Properties of Porous Crystalline Materials

2018 ◽  
Author(s):  
Srimanta Pakhira ◽  
Jose Mendoza-Cortes
Keyword(s):  
Transition Metal ◽  
Transition Metals ◽  
Electronic Properties ◽  
High Surface ◽  
Electronic Devices ◽  
High Surface Area ◽  
Main Role ◽  
Covalent Organic Frameworks ◽  
Porous Network ◽  
Crystalline Materials

<div>Covalent organic frameworks (COFs) have emerged as an important class of nano-porous crystalline materials with many potential applications. They are intriguing platforms for the design of porous skeletons with special functionality at the molecular level. However, despite their extraordinary properties, it is difficult to control their electronic properties, thus hindering the potential implementation in electronic devices. A new form of nanoporous material, COFs intercalated with first row transition metal is proposed to address this fundamental drawback - the lack of electronic tunability. Using first-principles calculations, we have designed 31 new COF materials <i>in-silico</i> by intercalating all of the first row transition metals (TMs) with boroxine-linked and triazine-linked COFs: COF-TM-x (where TM=Sc-Zn and x=3-5). This is a significant addition considering that only 187 experimentally COFs structures has been reported and characterized so far. We have investigated their structure and electronic properties. Specifically, we predict that COF's band gap and density of states (DOSs) can be controlled by intercalating first row transition metal atoms (TM: Sc - Zn) and fine tuned by the concentration of TMs. We also found that the $d$-subshell electron density of the TMs plays the main role in determining the electronic properties of the COFs. Thus intercalated-COFs provide a new strategy to control the electronic properties of materials within a porous network. This work opens up new avenues for the design of TM-intercalated materials with promising future applications in nanoporous electronic devices, where a high surface area coupled with fine-tuned electronic properties are desired.</div>

Tenacious Mass Transfer Limitations Drive Catalytic Selectivity during Electrochemical Carbon Dioxide Reduction

2019 ◽  
Author(s):  
Kailun Yang ◽  
Recep Kas ◽  
Wilson A. Smith
Keyword(s):  
Surface Area ◽  
High Surface ◽  
High Surface Area ◽  
Catalyst Layer ◽  
Active Surface ◽  
Active Surface Area ◽  
High Concentration ◽  
Copper Electrodes ◽  
Surface Enhanced ◽  
Local Current

<p>This study evaluated the performance of the commonly used strong buffer electrolytes, i.e. phosphate buffers, during CO<sub>2</sub> electroreduction in neutral pH conditions by using in-situ surface enhanced infrared absorption spectroscopy (SEIRAS). Unfortunately, the buffers break down a lot faster than anticipated which has serious implications on many studies in the literature such as selectivity and kinetic analysis of the electrocatalysts. Increasing electrolyte concentration, surprisingly, did not extend the potential window of the phosphate buffers due to dramatic increase in hydrogen evolution reaction. Even high concentration phosphate buffers (1 M) break down within the potentials (-1 V vs RHE) where hydrocarbons are formed on copper electrodes. We have extended the discussion to high surface area electrodes by evaluating electrodes composed of copper nanowires. We would like highlight that it is not possible to cope with high local current densities on these high surface area electrodes by using high buffer capacity solutions and the CO<sub>2</sub> electrocatalysts are needed to be evaluated by casting thin nanoparticle films onto inert substrates as commonly employed in fuel cell reactions and up to now scarcely employed in CO<sub>2</sub> electroreduction. In addition, we underscore that normalization of the electrocatalytic activity to the electrochemical active surface area is not the ultimate solution due to concentration gradient along the catalyst layer.This will “underestimate” the activity of high surface electrocatalyst and the degree of underestimation will depend on the thickness, porosity and morphology of the catalyst layer. </p> <p> </p>

Activated carbon from molasses efficiency for Cr(VI), Pb(II) and Cu(II) adsorption: A mechanistic study

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Activated Carbon ◽  
Phosphoric Acid ◽  
Sugar Industry ◽  
Chemical Activation ◽  
High Surface ◽  
High Surface Area ◽  
Mechanistic Study ◽  
Acid Mixture ◽  
Maximum Adsorption Capacity ◽  
Good Potential

Activated carbon was prepared from molasses, which are natural precursors of vegetable origin resulting from the sugar industry. A simple elaboration process, based on chemical activation with phosphoric acid, was proposed. The final product, prepared by activation of molasses/phosphoric acid mixture in air at 500°C, presented high surface area (more than 1400 m2/g) and important maximum adsorption capacity for methylene blue (625 mg/g) and iodine (1660 mg/g). The activated carbon (MP2(500)) showed a good potential for the adsorption of Cr(VI), Cu(II) and Pb(II) from aqueous solutions. The affinity for the three ions was observed in the following order Cu2+ Cr6+ Pb2+. The process is governed by monolayer adsorption following the Langmuir model, with a correlation coefficient close to unity.

Functionalized Nano-graphene Oxide as Multi-modal Clinic for Effective Drug Delivery

2017 ◽  
Vol 10 (4) ◽  
pp. 3768-3771
Author(s):  
Soumitra Satapathi ◽  
Rutusmita Mishra ◽  
Manisha Chatterjee ◽  
Partha Roy ◽  
Somesh Mohapatra
Keyword(s):  
Drug Delivery ◽  
Graphene Oxide ◽  
Cancer Cell ◽  
High Surface ◽  
High Surface Area ◽  
Cancer Cell Line ◽  
Xrd Analysis ◽  
Graphene Derivatives ◽  
Nano Graphene

Nano-materials based drug delivery modalities to specific organs and tissues has become one of the critical endeavors in pharmaceutical research. Recently, two-dimensional graphene has elicited considerable research interest because of its potential application in drug delivery systems. Here we report, the drug delivery applications of PEGylated nano-graphene oxide (nGO-PEG), complexed with a multiphoton active and anti-cancerous diarylheptanoid drug curcumin. Specifically, graphene-derivatives were used as nanovectors for the delivery of the hydrophobic anticancer drug curcumin due to its high surface area and easy surface functionalization. nGO was synthesized by modified Hummer’s method and confirmed by XRD analysis. The formation of nGO, nGO-PEG and nGO-PEG-Curcumin complex were monitored through UV-vis, IR spectroscopy. MTT assay and AO/EB staining found that nGO-PEG-Curcumin complex afforded highly potent cancer cell killing in vitro with a human breast cancer cell line MCF7.

Removal of microcystin-LR from drinking water with TiO2-coated activated carbon

2004 ◽  
Vol 4 (5-6) ◽  
pp. 21-28
Author(s):  
S.-C. Kim ◽  
D.-K. Lee
Keyword(s):  
Drinking Water ◽  
Activated Carbon ◽  
Synergistic Effect ◽  
Fluidized Bed ◽  
Continuous Flow ◽  
High Surface ◽  
High Surface Area ◽  
Fluidized Bed Reactor ◽  
Exterior Surface ◽  
Tio2 Particles

TiO2-coated granular activated carbon was employed for the removal of toxic microcystin-LR from water. High surface area of the activated carbon provided sites for the adsorption of microcystin-LR, and the adsorbed microcystin-LR migrated continuously onto the surface of TiO2 particles which located mainly at the exterior surface in the vicinity of the entrances of the macropores of the activated carbon. The migrated microcystin-LR was finally degraded into nontoxic products and CO2 very quickly. These combined roles of the activated carbon and TiO2 showed a synergistic effect on the efficient degradation of toxic microcystin-LR. A continuous flow fluidized bed reactor with the TiO2-coated activated carbon could successfully be employed for the efficient photocatalytic of microcystin-LR.

Sign in / Sign up

Export Citation Format

Share Document