In Situ Long-Term Measurements of pH and Redox Potential During Spent Fuel Leaching Under Stationary Conditions–The Method and Some Preliminary Results

1999 ◽  
Vol 608 ◽  
Author(s):  
K. Spahiu ◽  
L. Werme ◽  
J. Low ◽  
U-B. Eklund
Keyword(s):  
Redox Potential ◽  
Spent Fuel ◽  
Preliminary Results ◽  
Stationary Conditions

Predictions of the wetting of bentonite emplaced in a crystalline rock based on generic site characterization data

2018 ◽  
Vol 482 (1) ◽  
pp. 285-300 ◽  
Author(s):  
S. Baxter ◽  
D. Holton ◽  
S. Williams ◽  
S. Thompson
Keyword(s):  
Host Rock ◽  
Fractured Rock ◽  
Crystalline Rock ◽  
Spent Fuel ◽  
Rock Interaction ◽  
Buffer Material ◽  
Fracture Transmissivity ◽  
Interaction Experiment

AbstractA geological disposal facility (GDF) is the widely accepted long-term solution for the management of higher-activity radioactive waste. It consists of an engineered facility constructed in a suitable host rock. The facility is designed to inhibit the release of radioactivity by using a system consisting of engineered and natural barriers. The engineered barriers include the wasteform, used to immobilize the waste, the waste disposal container and any buffer material used to protect the container. The natural barrier includes the rocks in which the facility is constructed. The careful design of this multi-barrier system enables the harmful effects of the radioactivity on humans and biota in the surface environment to be reduced to safe levels.Bentonite is an important buffer material used as a component of a multi-barrier disposal system. For example, compacted bentonite rings and blocks are used to protect the copper container, used for the disposal of spent fuel, in the KBS-3 disposal system. As the bentonite saturates, through contact with groundwater from the host rock, it swells and provides a low hydraulic conductivity barrier, enabling the container to be protected from deleterious processes, such as corrosion. The characteristic swelling behaviour of bentonite is due to the presence of significant quantities of sodium montmorillonite.Recently, there have been detailed in situ experiments designed to understand how bentonite performs under natural conditions. One such experiment is the Buffer–Rock Interaction Experiment (BRIE), performed at the Äspö Hard Rock Laboratory near Oskarshamn in the SE of Sweden. This experiment is designed to further understand the wetting of bentonite from the groundwater flow in a fractured granite host rock.In this paper, the observations from the BRIE are explained using an integrated model that is able to describe the saturation of bentonite emplaced in a heterogeneous fractured rock. It provides a framework to understand the key processes in both the rock and bentonite. The predictive capability of these models was investigated within the context of uncertainties in the data and the consequence for predictions of the wetting of emplaced bentonite. For example, to predict the wetting of emplaced bentonite requires an understanding of the distribution of fracture transmissivity intersecting the bentonite. A consequence of these findings is that the characterization of the fractured rock local to the bentonite is critical to understanding the subsequent wetting profiles. In particular, prediction of the time taken to achieve full saturation of bentonite using a simplified equivalent homogeneous description of the fractured host rock will tend to be too short.

Long-term continuous in situ potentiometrically measured redox potential in anoxic groundwater with high methane and iron contents

2010 ◽  
Vol 64 (1) ◽  
pp. 143-149 ◽  
Author(s):  
Seiichiro Ioka ◽  
Toshiaki Sakai ◽  
Toshifumi Igarashi ◽  
Yoji Ishijima
Keyword(s):  
Redox Potential

scholarly journals Global soil moisture data derived through machine learning trained with in-situ measurements

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Sungmin O. ◽  
Rene Orth
Keyword(s):  
Machine Learning ◽  
Soil Moisture ◽  
Large Scale ◽  
Short Term Memory ◽  
Temporal Dynamics ◽  
Soil Moisture Data ◽  
Wide Range ◽  
Global Soil

AbstractWhile soil moisture information is essential for a wide range of hydrologic and climate applications, spatially-continuous soil moisture data is only available from satellite observations or model simulations. Here we present a global, long-term dataset of soil moisture derived through machine learning trained with in-situ measurements, SoMo.ml. We train a Long Short-Term Memory (LSTM) model to extrapolate daily soil moisture dynamics in space and in time, based on in-situ data collected from more than 1,000 stations across the globe. SoMo.ml provides multi-layer soil moisture data (0–10 cm, 10–30 cm, and 30–50 cm) at 0.25° spatial and daily temporal resolution over the period 2000–2019. The performance of the resulting dataset is evaluated through cross validation and inter-comparison with existing soil moisture datasets. SoMo.ml performs especially well in terms of temporal dynamics, making it particularly useful for applications requiring time-varying soil moisture, such as anomaly detection and memory analyses. SoMo.ml complements the existing suite of modelled and satellite-based datasets given its distinct derivation, to support large-scale hydrological, meteorological, and ecological analyses.

scholarly journals A Study of UVER in Santiago, Chile Based on Long-Term In Situ Measurements (Five Years) and Empirical Modelling

Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 368
Author(s):  
Lisdelys González-Rodríguez ◽  
Amauri Pereira de Oliveira ◽  
Lien Rodríguez-López ◽  
Jorge Rosas ◽  
David Contreras ◽  
...  
Keyword(s):  
Urban Areas ◽  
Solar Spectrum ◽  
Sun Exposure ◽  
Great Accuracy ◽  
In Situ Measurements ◽  
Uv Index ◽  
Empirical Modelling ◽  
The People

Ultraviolet radiation is a highly energetic component of the solar spectrum that needs to be monitored because is harmful to life on Earth, especially in areas where the ozone layer has been depleted, like Chile. This work is the first to address the long-term (five-year) behaviour of ultraviolet erythemal radiation (UVER) in Santiago, Chile (33.5° S, 70.7° W, 500 m) using in situ measurements and empirical modelling. Observations indicate that to alert the people on the risks of UVER overexposure, it is necessary to use, in addition to the currently available UV index (UVI), three more erythema indices: standard erythemal doses (SEDs), minimum erythemal doses (MEDs), and sun exposure time (tery). The combination of UVI, SEDs, MEDs, and tery shows that in Santiago, individuals with skin types III and IV are exposed to harmfully high UVER doses for 46% of the time that UVI indicates is safe. Empirical models predicted hourly and daily values UVER in Santiago with great accuracy and can be applied to other Chilean urban areas with similar climate. This research inspires future advances in reconstructing large datasets to analyse the UVER in Central Chile, its trends, and its changes.

scholarly journals In-Situ Annealed Ti3C2Tx MXene Based All-Solid-State Flexible Zn-Ion Hybrid Micro Supercapacitor Array with Enhanced Stability

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
La Li ◽  
Weijia Liu ◽  
Kai Jiang ◽  
Di Chen ◽  
Fengyu Qu ◽  
...  
Keyword(s):  
High Energy ◽  
High Rate ◽  
High Energy Density ◽  
Electrochemical Performances ◽  
Integrated Electronics ◽  
Long Term Stability ◽  
Hybrid Supercapacitors ◽  
Portable Electronics

AbstractZn-ion hybrid supercapacitors (SCs) are considered as promising energy storage owing to their high energy density compared to traditional SCs. How to realize the miniaturization, patterning, and flexibility of the Zn-ion SCs without affecting the electrochemical performances has special meanings for expanding their applications in wearable integrated electronics. Ti3C2Tx cathode with outstanding conductivity, unique lamellar structure and good mechanical flexibility has been demonstrated tremendous potential in the design of Zn-ion SCs, but achieving long cycling stability and high rate stability is still big challenges. Here, we proposed a facile laser writing approach to fabricate patterned Ti3C2Tx-based Zn-ion micro-supercapacitors (MSCs), followed by the in-situ anneal treatment of the assembled MSCs to improve the long-term stability, which exhibits 80% of the capacitance retention even after 50,000 charge/discharge cycles and superior rate stability. The influence of the cathode thickness on the electrochemical performance of the MSCs is also studied. When the thickness reaches 0.851 µm the maximum areal capacitance of 72.02 mF cm−2 at scan rate of 10 mV s−1, which is 1.77 times higher than that with a thickness of 0.329 µm (35.6 mF cm−2). Moreover, the fabricated Ti3C2Tx based Zn-ion MSCs have excellent flexibility, a digital timer can be driven by the single device even under bending state, a flexible LED displayer of “TiC” logo also can be easily lighted by the MSC arrays under twisting, crimping, and winding conditions, demonstrating the scalable fabrication and application of the fabricated MSCs in portable electronics.

scholarly journals Poly(ethylene glycol)-b-poly(1,3-trimethylene carbonate) Copolymers for the Formulation of In Situ Forming Depot Long-Acting Injectables

Pharmaceutics ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 605
Author(s):  
Marie-Emérentienne Cagnon ◽  
Silvio Curia ◽  
Juliette Serindoux ◽  
Jean-Manuel Cros ◽  
Feifei Ng ◽  
...  
Keyword(s):  
Ethylene Glycol ◽  
Surface Erosion ◽  
Sustained Delivery ◽  
Trimethylene Carbonate ◽  
Poly Ethylene Glycol ◽  
In Situ Forming ◽  
Poly Ethylene ◽  
Long Acting

This article describes the utilization of (methoxy)poly(ethylene glycol)-b-poly(1,3-trimethylene carbonate) ((m)PEG–PTMC) diblock and triblock copolymers for the formulation of in situ forming depot long-acting injectables by solvent exchange. The results shown in this manuscript demonstrate that it is possible to achieve long-term drug deliveries from suspension formulations prepared with these copolymers, with release durations up to several months in vitro. The utilization of copolymers with different PEG and PTMC molecular weights affords to modulate the release profile and duration. A pharmacokinetic study in rats with meloxicam confirmed the feasibility of achieving at least 28 days of sustained delivery by using this technology while showing good local tolerability in the subcutaneous environment. The characterization of the depots at the end of the in vivo study suggests that the rapid phase exchange upon administration and the surface erosion of the resulting depots are driving the delivery kinetics from suspension formulations. Due to the widely accepted utilization of meloxicam as an analgesic drug for animal care, the results shown in this article are of special interest for the development of veterinary products aiming at a very long-term sustained delivery of this therapeutic molecule.

Sign in / Sign up

Export Citation Format

Share Document