Dlts-Studies on the “New Oxygen Donor” in Heat Treated and Hydrogenated CZ-Grown SI

1985 ◽  
Vol 59 ◽  
Author(s):  
Karlheinz Hölzlein ◽  
G. Pensl ◽  
M. Schulz ◽  
N. M. Johnson
Keyword(s):  
Low Temperature ◽  
Heat Treatments ◽  
Experimental Results ◽  
Interface Model ◽  
Trap States ◽  
High Concentration ◽  
Oxygen Donor ◽  
Heat Treated ◽  
Processing Steps

ABSTRACTCz-grown Si samples containing a high concentration of oxygen are investigated after various processing steps by DLTS. Heat treatments ranging from 500°C–1000°C are performed to study the formation and annihilation of the “New Oxygen Donor” (ND) traps. Hydrogenation at low temperature leads to a reduction of the ND trap states. The experimental results confirm the “SiOx Interface Model” which assumes two differing types of interfacerelated states.

REMOVAL OF TRACE Cd (II) FROM AQUEOUS SOLUTIONS BY FUNGAL ADSORBENTS: AN EVALUATION OF SELF-IMMOBILIZATION OF RHIZOPUS ORYZAE

1994 ◽  
Vol 30 (3) ◽  
pp. 245-253 ◽  
Author(s):  
Chihpin Huang ◽  
Hsin-Huei Chiu
Keyword(s):  
Aqueous Solutions ◽  
Rhizopus Oryzae ◽  
Heat Treatments ◽  
Experimental Results ◽  
Optimum Size ◽  
Agitation Intensity ◽  
Heat Treated ◽  
Acid Washing ◽  
Economic Considerations ◽  
Size And Structure

Rhizopus oryzae are grown in the fermenter as discrete and nearly spherical pellets. The pellets ' size and structure suggest that more agitation produces smaller and more compact pellets. In this study, the agitation intensity in the fermenter is changed to produce the suspension mycelium and pelletized mycelia with various sizes. Acid-washing and heat treatments are applied to deactivate the fungi. Experimental results indicate that acid-treated mycelia are preferential to either fresh or heat-treated pelletized mycelium for use in the binding of Cd (II) ions. Based on engineering and economic considerations, this study screens an optimum size of pellet to be 3.8 mm which is formed under 2 -day pre-cultivation and 5-day harvest in a fermenter at 300 rpm of agitation.

Structure of heat-treated sol-gel SiO2 glasses containing silver

2001 ◽  
Vol 16 (7) ◽  
pp. 2007-2012 ◽  
Author(s):  
M. G. Garníca-Romo ◽  
J. González-Hernández ◽  
M. A. Hernández-Landaverde ◽  
Y. V. Vorobiev ◽  
F. Ruiz ◽  
...  
Keyword(s):  
Low Temperature ◽  
Sol Gel ◽  
Heat Treatments ◽  
Glass Crystallization ◽  
Gel Method ◽  
Sol Gel Method ◽  
Heat Treated

The crystallization of bulk amorphous SiO2 samples, prepared by the sol-gel method, was obtained by heat treatments in air at temperatures as low as 500 °C. This occurs when silver is added to the precursor solutions in an amount such that it forms aggregates embedded in the glass. Another requirement to observe the low-temperature glass crystallization is that the bulk samples must be prepared from precursor solutions with specific compositions. These compositions, have a high H2O/TEOS ratio, which produces an amorphous SiO2 structure with some structural similarities to cristobalite, the phase in which the SiO2 glass crystallizes.

Effect of Silver Content on the Crystalline Phase and Microstructure of TiO2 Coating Deposited on Unglazed Ceramics Tile

2020 ◽  
Vol 17 (3) ◽  
pp. 8179-8185
Author(s):  
N.Z. Hafizah ◽  
J. M. Juoi ◽  
M.R. Zulkifli ◽  
M.A. Musa
Keyword(s):  
Particle Growth ◽  
Dip Coating ◽  
Tio2 Coating ◽  
High Concentration ◽  
Ceramic Tiles ◽  
Soaking Time ◽  
Heat Treated ◽  
Ag Particles ◽  
Tio2 Sol ◽  
Almost All

The synthesis of Ag-TiO2 coating using AgNO3 precursor is expected to give the properties as pure as Ag nanoparticles. Commonly, high concentration of Ag attributed to agglomeration of silver species and reduction to Ag0 particles on TiO2 surface. In contrast, at lower concentration, Ag species exist as AgO, Ag2O and Ag0. Hence, the exact amount of Ag, which can effectively control the particle growth and agglomeration, surface area, thermal stability and band gap of the TiO2 coating, are still vague and stated differently. In the present study, the effect of Ag content on the phase transformation and surface morphology of Ag-TiO2 coating were reported. TiO2 sol were prepared by incorporating Ag at 2.5, 5 and 7.5 mol % and deposited on unglazed ceramic tiles thru five times dip coating. The deposited Ag-TiO2 coatings were heat treated at 500 °C for 1 hour soaking time. XRD analyses revealed that the deposited Ag-TiO2 coating consists of anatase, rutile, Ag2O and metallic Ag. Almost all the coating surfaces illustrated cracks. Increased Ag content lead to presence of tiny particles on the surfaces and EDX spectrum revealed the presence of Ti, O and metallic Ag particles. However, at the addition of 5 mol % Ag, there was no metallic Ag presence and a dense coating with the lowest thickness of ±11.4µm is observed.

scholarly journals Elucidation of the Crystal Growth Characteristics of SnO2 Nanoaggregates Formed by Sequential Low-Temperature Sol-Gel Reaction and Freeze Drying

Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1738
Author(s):  
Saeid Vafaei ◽  
Alexander Wolosz ◽  
Catlin Ethridge ◽  
Udo Schnupf ◽  
Nagisa Hattori ◽  
...  
Keyword(s):  
Crystal Growth ◽  
Low Temperature ◽  
Photoelectron Spectroscopy ◽  
High Performance ◽  
Freeze Drying ◽  
Sno2 Nanoparticles ◽  
Sol Gel ◽  
Functional Materials ◽  
Cost Effective ◽  
High Concentration

SnO2 nanoparticles are regarded as attractive, functional materials because of their versatile applications. SnO2 nanoaggregates with single-nanometer-scale lumpy surfaces provide opportunities to enhance hetero-material interfacial areas, leading to the performance improvement of materials and devices. For the first time, we demonstrate that SnO2 nanoaggregates with oxygen vacancies can be produced by a simple, low-temperature sol-gel approach combined with freeze-drying. We characterize the initiation of the low-temperature crystal growth of the obtained SnO2 nanoaggregates using high-resolution transmission electron microscopy (HRTEM). The results indicate that Sn (II) hydroxide precursors are converted into submicrometer-scale nanoaggregates consisting of uniform SnO2 spherical nanocrystals (2~5 nm in size). As the sol-gel reaction time increases, further crystallization is observed through the neighboring particles in a confined part of the aggregates, while the specific surface areas of the SnO2 samples increase concomitantly. In addition, X-ray photoelectron spectroscopy (XPS) measurements suggest that Sn (II) ions exist in the SnO2 samples when the reactions are stopped after a short time or when a relatively high concentration of Sn (II) is involved in the corresponding sol-gel reactions. Understanding this low-temperature growth of 3D SnO2 will provide new avenues for developing and producing high-performance, photofunctional nanomaterials via a cost-effective and scalable method.

scholarly journals Effects of equal channel angular pressing and heat treatments on the microstructures and mechanical properties of selective laser melted and cast AlSi10Mg alloys

2021 ◽  
Vol 21 (3) ◽  
Author(s):  
Przemysław Snopiński ◽  
Mariusz Król ◽  
Marek Pagáč ◽  
Jana Petrů ◽  
Jiří Hajnyš ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Low Temperature ◽  
Equal Channel Angular Pressing ◽  
Heat Treatments ◽  
Electron Backscattered Diffraction ◽  
Angular Pressing ◽  
Low Temperature Annealing ◽  
Transmission Electron ◽  
Before And After ◽  
The Impact

AbstractThis study investigated the impact of the equal channel angular pressing (ECAP) combined with heat treatments on the microstructure and mechanical properties of AlSi10Mg alloys fabricated via selective laser melting (SLM) and gravity casting. Special attention was directed towards determining the effect of post-fabrication heat treatments on the microstructural evolution of AlSi10Mg alloy fabricated using two different routes. Three initial alloy conditions were considered prior to ECAP deformation: (1) as-cast in solution treated (T4) condition, (2) SLM in T4 condition, (3) SLM subjected to low-temperature annealing. Light microscopy, transmission electron microscopy, X-ray diffraction line broadening analysis, and electron backscattered diffraction analysis were used to characterize the microstructures before and after ECAP. The results indicated that SLM followed by low-temperature annealing led to superior mechanical properties, relative to the two other conditions. Microscopic analyses revealed that the partial-cellular structure contributed to strong work hardening. This behavior enhanced the material’s strength because of the enhanced accumulation of geometrically necessary dislocations during ECAP deformation.

3-D Characterization of Global and Local Microstructural Effects on Spall Damage in Shock Loaded FCC Metals: Experimental and Modeling

2013 ◽  
Author(s):  
A. Brown ◽  
K. Krishnan ◽  
L. Wayne ◽  
P. Peralta ◽  
S. N. Luo ◽  
...  
Keyword(s):  
Weak Link ◽  
Heat Treatments ◽  
Taylor Factor ◽  
Weak Links ◽  
Spall Damage ◽  
Heat Treated ◽  
Microstructural Effects ◽  
Global And Local ◽  
Low Pressures

Global and local microstructural weak links for spall damage were investigated using 3-D characterization in polycrystalline (PC) and multicrystalline (MC) copper samples, respectively. All samples were shocked via flyer-target plate experiments using a laser drive at low pressures (2–6 GPa). The flyer plates measured approximately 500 μm thick and 8 mm in diameter and the target plates measured approximately 1000 μm thick and 10 mm in diameter. Electron Backscattering Diffraction (EBSD) and optical microscopy were used to determine to presence of voids and relate them to the surrounding microstructure. Statistics on the strength of grain boundaries (GBs) was conducted by analyzing PC samples and collecting the misorientation across GBs with damage present, and it was found that a misorientation range of 25–50° is favorable for damage. Statistics were also taken of copper PC samples that had undergone different heat treatments and it was found that although the 25–50° range is less dominant, it is still favorable for damage nucleation. Removal of initial plastic strain via heat treatments and an increase in Σ3 CSL boundaries, indicative of strong annealing twins, also led to an increased amount of transgranular damage. 3-D X-ray tomography data were used to investigate the shape of the voids present in untreated, as received and heat treated samples. It was found that the as received sample contained a higher amount of “disk”, or, “sheet-like” voids indicative of intergranular damage, whereas the heat treated samples had a higher fraction of spherical shaped voids, indicative of transgranular damage. MC samples were used to study microstructural weak links for spall damage because the overall grain size is much larger than the average void size, making it possible to determine which GBs nucleated damage. Simulations and experimental analysis of damage sites with large volumes indicate that high Taylor factor mismatches with respect to the crystallographic grain GB normal is the primary cause for the nucleation of damage at a GB interface and a low Taylor factor along the shock direction in either grain drives void growth perpendicular to the GB. Cases where experimental results show damage and simulation results show no damage are attributed to the presence of an intrinsic microstructural weak link, such as an incoherent twin boundary.

scholarly journals Start-up Strategies for Anaerobic Ammonia Oxidation (Anammox) in In-Situ Nitrogen Removal from Polluted Groundwater in Rare Earth Mining Areas

2021 ◽  
Vol 13 (8) ◽  
pp. 4591
Author(s):  
Shuanglei Huang ◽  
Daishe Wu
Keyword(s):  
Rare Earth ◽  
Low Temperature ◽  
Removal Efficiency ◽  
Nitrogen Removal ◽  
Ex Situ ◽  
High Concentration ◽  
Low Concentration ◽  
Start Up ◽  
Anammox Activity

The tremendous input of ammonium and rare earth element (REE) ions released by the enormous consumption of (NH4)2SO4 in in situ leaching for ion-adsorption RE mining caused serious ground and surface water contamination. Anaerobic ammonium oxidation (anammox) was a sustainable in situ technology that can reduce this nitrogen pollution. In this research, in situ, semi in situ, and ex situ method of inoculation that included low-concentration (0.02 mg·L−1) and high-concentration (0.10 mg·L−1) lanthanum (La)(III) were adopted to explore effective start-up strategies for starting up anammox reactors seeded with activated sludge and anammox sludge. The reactors were refrigerated for 30 days at 4 °C to investigate the effects of La(III) during a period of low-temperature. The results showed that the in situ and semi in situ enrichment strategies with the addition of La(III) at a low-concentration La(III) addition (0.02 mg·L−1) reduced the length of time required to reactivate the sludge until it reached a state of stable anammox activity and high nitrogen removal efficiency by 60–71 days. The addition of La(III) promoted the formation of sludge floc with a compact structure that enabled it to resist the adverse effects of low temperature and so to maintain a high abundance of AnAOB and microbacterial community diversity of sludge during refrigeration period. The addition of La(III) at a high concentration caused the cellular percentage of AnAOB to decrease from 54.60 ± 6.19% to 17.35 ± 6.69% during the enrichment and reduced nitrogen removal efficiency to an unrecoverable level to post-refrigeration.

Enhancing the Thermoelectric Properties in Carbon Fiber/Cement Composites by Using Steel Slag

2013 ◽  
Vol 539 ◽  
pp. 103-107 ◽  
Author(s):  
Jun Qing Zuo ◽  
Wu Yao ◽  
Jun Jie Qin
Keyword(s):  
Carbon Fiber ◽  
Linear Relationship ◽  
Thermoelectric Power ◽  
Thermoelectric Properties ◽  
Steel Slag ◽  
Experimental Results ◽  
Cement Composites ◽  
Temperature Differential ◽  
High Concentration ◽  
Good Linear

Thermoelectric properties of steel slag-carbon fiber/cement composites were studied in this paper. The effect of steel slag content on thermoelectric properties was focused on especially. The experimental results show that the addition of steel slag leads to an increase in the positive thermoelectric power of the cabon fiber/cement composites. The highest absolute thermoelectric power of carbon fiber/cement composites was rendered as positive as 14.4µV/°C by using steel slag, which had a high concentration of holes. Beside, a good linear relationship was observed between thermoelectric power and temperature differential on the specimen.

Study on the Dyeing Behavior of Wool Fiber Treated with Nano-SiO2/Ag Antibacterial Agent

2011 ◽  
Vol 332-334 ◽  
pp. 27-30 ◽  
Author(s):  
Mei Niu ◽  
Zi Lu Wu ◽  
Jin Ming Dai ◽  
Wen Sheng Hou ◽  
Sheng Shi ◽  
...  
Keyword(s):  
Low Temperature ◽  
Antibacterial Agent ◽  
Important Influence ◽  
Wool Fiber ◽  
Experimental Results ◽  
Ultrasonic Frequency ◽  
Acid Dyes ◽  
Nano Sio2 ◽  
Dyeing Process ◽  
The Impact

Wool fiber was firstly pretreated by nano-SiO2/Ag antibacterial agent, and then dyed with an acid dyes at low temperature by ultrasonic dyeing. Many factors had an important influence on the dye ability and the antibacterial behavior during the dyeing process of antibacterial wool fiber. The experimental results indicate that the dye-takeup rates of antibacterial wool fiber were enhanced with the increase of the concentration of nano-SiO2/Ag, the dyeing temperature, the dyeing time and the ultrasonic frequency (less than 60Hz). However, the antibacterial ratios of wool fiber were declined in the impact of these factors other than the concentration of antibacterial agent.

Sign in / Sign up

Export Citation Format

Share Document