Self-Assembly Processes for Organic Led Transport Layers and Electrode Passivation

1999 ◽  
Vol 558 ◽  
Author(s):  
J.E. Malinsky ◽  
W. Li ◽  
Q. Wang ◽  
J. Cui ◽  
H. Chou ◽  
...  
Keyword(s):  
Self Assembly ◽  
Building Blocks ◽  
Hole Transport ◽  
Transport Layer ◽  
Dielectric Films ◽  
Hole Transport Layer ◽  
Use Of Self ◽  
Self Assembling ◽  
Electrode Passivation ◽  
Thin Dielectric Films

ABSTRACTThis contribution describes the use of self-limiting siloxane chemisoroption processes to self-assemble building blocks for the modification of vacuum-deposited organic LED (OLED) devices. One approach consists of the use of self-assembling OLED hole transport materials for application in hybrid self-assembled + vapor deposited two-layer devices. Another approach involves the application of self-limiting, chemisorptive self-assembly techniques to introduce thin dielectric films between the anode and hole transport layer of a vapor deposited two-layer OLED device.

Self-Assembly Processes for Organic Led Transport Layers and Electrode Passivation

1999 ◽  
Vol 561 ◽  
Author(s):  
J.E. Malinsky ◽  
W. Li ◽  
Q. Wang ◽  
J. Cui ◽  
H. Chou ◽  
...  
Keyword(s):  
Self Assembly ◽  
Building Blocks ◽  
Hole Transport ◽  
Transport Layer ◽  
Dielectric Films ◽  
Hole Transport Layer ◽  
Use Of Self ◽  
Self Assembling ◽  
Electrode Passivation ◽  
Thin Dielectric Films

ABSTRACTThis contribution describes the use of self-limiting siloxane chemisoroption processes to self-assemble building blocks for the modification of vacuum-deposited organic LED (OLED) devices. One approach consists of the use of self-assembling OLED hole transport materials for application in hybrid self-assembled + vapor deposited two-layer devices. Another approach involves the application of self-limiting, chemisorptive self-assembly techniques to introduce thin dielectric films between the anode and hole transport layer of a vapor deposited two-layer OLED device.

scholarly journals Application of MXenes in Perovskite Solar Cells: A Short Review

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 2151
Author(s):  
Syed Shah ◽  
Muhammad Sayyad ◽  
Karim Khan ◽  
Jinghua Sun ◽  
Zhongyi Guo
Keyword(s):  
Solar Cells ◽  
Carrier Mobility ◽  
Perovskite Solar Cells ◽  
Building Blocks ◽  
Short Review ◽  
Hole Transport ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Hole Transport Layer ◽  
Superior Mechanical Properties

Application of MXene materials in perovskite solar cells (PSCs) has attracted considerable attention owing to their supreme electrical conductivity, excellent carrier mobility, adjustable surface functional groups, excellent transparency and superior mechanical properties. This article reviews the progress made so far in using Ti3C2Tx MXene materials in the building blocks of perovskite solar cells such as electrodes, hole transport layer (HTL), electron transport layer (ETL) and perovskite photoactive layer. Moreover, we provide an outlook on the exciting opportunities this recently developed field offers, and the challenges faced in effectively incorporating MXene materials in the building blocks of PSCs for better operational stability and enhanced performance.

scholarly journals A Brief Review of the Role of 2D Mxene Nanosheets toward Solar Cells Efficiency Improvement

Nanomaterials ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 2732
Author(s):  
T. F. Alhamada ◽  
M. A. Azmah Hanim ◽  
D. W. Jung ◽  
A. A. Nuraini ◽  
W. Z. Wan Hasan
Keyword(s):  
Solar Cells ◽  
Conversion Efficiency ◽  
Perovskite Solar Cells ◽  
Building Blocks ◽  
Hole Transport ◽  
Transport Layer ◽  
Hole Transport Layer ◽  
Cost Ratio ◽  
Quality Cost ◽  
Research Issues

This article discusses the application of two-dimensional metal MXenes in solar cells (SCs), which has attracted a lot of interest due to their outstanding transparency, metallic electrical conductivity, and mechanical characteristics. In addition, some application examples of MXenes as an electrode, additive, and electron/hole transport layer in perovskite solar cells are described individually, with essential research issues highlighted. Firstly, it is imperative to comprehend the conversion efficiency of solar cells and the difficulties of effectively incorporating metal MXenes into the building blocks of solar cells to improve stability and operational performance. Based on the analysis of new articles, several ideas have been generated to advance the exploration of the potential of MXene in SCs. In addition, research into other relevant MXene suitable in perovskite solar cells (PSCs) is required to enhance the relevant work. Therefore, we identify new perspectives to achieve solar cell power conversion efficiency with an excellent quality–cost ratio.

High transmittance, photoluminescence properties of PANI: PSS multilayer thin films to develop a hole transport layer for OLED application

10.26524/jap9 ◽  
2016 ◽  
Vol 1 (2) ◽  
Author(s):  
Jayamurugan P ◽  
Manoharan D ◽  
Ramadevi K ◽  
Upendar Reddy K ◽  
Subba Rao Y V
Keyword(s):  
Thin Films ◽  
Self Assembly ◽  
Hole Transport ◽  
Transport Layer ◽  
Hole Transport Layer ◽  
Multilayer Thin Films ◽  
Layer By Layer ◽  
Force Microscopy ◽  
Atomic Force ◽  
Assembly Technique

The nanocolloidal solution has been spin coated on the substrate layer-by-layer, a self-assembly technique has used to form the multilayer thin films. The optical and structural properties of self-assembled multilayer thin films were characterized by UV-visible, photoluminescence, X-ray diffraction and atomic force microscopy

Molecular Self-Assembly Routes to Optically Functional Thin Films: Electroluminescent Multilayer Structures

1997 ◽  
Vol 488 ◽  
Author(s):  
W. Li ◽  
J. E. Malinsky ◽  
H. Chou ◽  
W. Ma ◽  
L. Geng ◽  
...  
Keyword(s):  
Self Assembly ◽  
Chemical Characterization ◽  
Hole Transport ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Hole Transport Layer ◽  
Layer By Layer ◽  
Self Assembled ◽  
Precursor Molecules

AbstractThis contribution describes the use of layer-by-layer self-limiting siloxane chemisorption processes to self-assemble structurally regular multilayer organic LED (OLED) devices. Topics discussed include: 1) the synthesis of silyl-functionalized precursor molecules for hole transport layer (HTL), emissive layer (EML), and electron transport layer (ETL) self-assembly, 2) the use of layer-by-layer self-assembly for ITO electrode modification/passivation/hole-electron balancing in a vapor-deposited device, 3) the microstructure/chemical characterization of HTL self-assembly using a prototype triarylamine precursor, 4) fabrication and properties of a hybrid self-assembled + vapor deposited two-layer LED, 4) fabrication and properties of a fully self-assembled two-layer OLED.

Factors Affecting Molecular Self-Assembly and Its Mechanism

2012 ◽  
Vol 9 (1) ◽  
pp. 43 ◽  
Author(s):  
Hueyling Tan
Keyword(s):  
Self Assembly ◽  
Building Blocks ◽  
Molecular Engineering ◽  
Molecular Structures ◽  
Polymer Science ◽  
New Approach ◽  
Factors Affecting ◽  
Dna Structures ◽  
Self Assembling ◽  
Wide Range

Molecular self-assembly is ubiquitous in nature and has emerged as a new approach to produce new materials in chemistry, engineering, nanotechnology, polymer science and materials. Molecular self-assembly has been attracting increasing interest from the scientific community in recent years due to its importance in understanding biology and a variety of diseases at the molecular level. In the last few years, considerable advances have been made in the use ofpeptides as building blocks to produce biological materials for wide range of applications, including fabricating novel supra-molecular structures and scaffolding for tissue repair. The study ofbiological self-assembly systems represents a significant advancement in molecular engineering and is a rapidly growing scientific and engineering field that crosses the boundaries ofexisting disciplines. Many self-assembling systems are rangefrom bi- andtri-block copolymers to DNA structures as well as simple and complex proteins andpeptides. The ultimate goal is to harness molecular self-assembly such that design andcontrol ofbottom-up processes is achieved thereby enabling exploitation of structures developed at the meso- and macro-scopic scale for the purposes oflife and non-life science applications. Such aspirations can be achievedthrough understanding thefundamental principles behind the selforganisation and self-synthesis processes exhibited by biological systems.

Sign in / Sign up

Export Citation Format

Share Document