An Investigation Of The Cause Of Initial Band Bending Of A Cleaved Clean n-GaAs(llO) Surface

1985 ◽  
Vol 54 ◽  
Author(s):  
K. K. Chin ◽  
R. Cao ◽  
K. Miyano ◽  
C. E. McCants ◽  
I. Lindau ◽  
...  
Keyword(s):  
Noble Metal ◽  
Noble Metals ◽  
Surface Defect ◽  
Poor Quality ◽  
Defect States ◽  
Band Bending ◽  
Metal Atoms ◽  
Barrier Formation ◽  
New Type ◽  
Induced Defects

ABSTRACTThe cause of the initial band bending on a clean n-GaAs(llO) surface of so-called “poor quality cleavage” has been controversial. To study this problem, a new type of geometric factor multi-metal evaporator has been designed, which enables us to obtain reproducible metal coverages as low as 10−4 monolayers. By following the early stages of band bending induced by the deposition of noble metals Cu, Ag and Au on n-GaAs (110) surfaces of different cleavage quality, it is found that a certain amount of initial band bending of a clean GaAs(llO) surface of poor quality cleavage corresponds to a certain amount of noble metal coverage (usually lower than 0.01 ML). This phenomenon can be explained in the following way. Any initial band bending on a clean n-GaAs(HO) surface is due to surface defect states created by the cleaving. These cleavage induced defects may be of the same nature as the interface states created by deposited noble metal atoms. Our experimental results will be discussed in the framework of the unified defect model of the Schottky barrier formation on III-V semiconductors.

Photoemission Study of the Physical Nature of the InP Near-Surface Defect States

1986 ◽  
Vol 77 ◽  
Author(s):  
K. K. Chin ◽  
R. Cao ◽  
T. Kendelewicz ◽  
K. Miyano ◽  
J. J. Yeh ◽  
...  
Keyword(s):  
Surface Defect ◽  
Physical Nature ◽  
Defect States ◽  
Band Bending ◽  
Near Surface ◽  
Fermi Level Pinning ◽  
Low Temperature Annealing ◽  
Donor States ◽  
Photoemission Study ◽  
P Type

ABSTRACTThe physical nature of the InP near-surface defect acceptor and donor states are studied by using photoemission spectroscopy. It is found that the In/n-InP(110) interface band bending does not start until the In coverage reaches about 0.3 monolayer (ML), while the In/p-InP(110) band bending is almost saturated at 0.3 ML. The annealing effect on the band bending of clean cleaved n-and p-type InP(llO) surfaces is also studied. It is found that annealing of the clean surface creates an irreversible band bending effect on the p-InP(110), but the n-InP(110) almost does not show any band bending after low temperature annealing. Based on these two striking differences in the band bending behavior of n- and p-type InP, it is proposed that the physical nature of InP near-surface defect acceptor and donor levels may be different and that phosphorus vacancies are the cause of p-InP surface Fermi level pinning.

scholarly journals Highly Porous and Ultra-Lightweight Aero-Ga2O3: Enhancement of Photocatalytic Activity by Noble Metals

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 1985
Author(s):  
Irina Plesco ◽  
Vladimir Ciobanu ◽  
Tudor Braniste ◽  
Veaceslav Ursaki ◽  
Florian Rasch ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Noble Metals ◽  
Hybrid Structures ◽  
Blue Dye ◽  
Light Illumination ◽  
Methylene Blue Dye ◽  
Visible Light Illumination ◽  
New Type ◽  
Highly Porous

A new type of photocatalyst is proposed on the basis of aero-β-Ga2O3, which is a material constructed from a network of interconnected tetrapods with arms in the form of microtubes with nanometric walls. The aero-Ga2O3 material is obtained by annealing of aero-GaN fabricated by epitaxial growth on ZnO microtetrapods. The hybrid structures composed of aero-Ga2O3 functionalized with Au or Pt nanodots were tested for the photocatalytic degradation of methylene blue dye under UV or visible light illumination. The functionalization of aero-Ga2O3 with noble metals results in the enhancement of the photocatalytic performances of bare material, reaching the performances inherent to ZnO while gaining the advantage of the increased chemical stability. The mechanisms of enhancement of the photocatalytic properties by activating aero-Ga2O3 with noble metals are discussed to elucidate their potential for environmental applications.

Adsorption of the Gas Molecules (NH3, C2H6O, C3H6O, CO, H2S) on noble metal (Ag, Au, Pt, Pd, Ru)–Doped MoSe2 Monolayer: A First-Principles Study

2021 ◽  
Author(s):  
Lanjuan Zhou ◽  
Sujing Yu ◽  
Yan Yang ◽  
Qi Li ◽  
Tingting Li ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Noble Metal ◽  
First Principles ◽  
Density Functional ◽  
Noble Metals ◽  
Gas Sensing ◽  
Functional Theory ◽  
First Principles Study ◽  
Gas Molecules ◽  
Sensing Performance

In this paper, the effects of five noble metals (Au, Pt, Pd, Ag, Ru) doped MoSe2 on improving gas sensing performance were predicted through density functional theory (DFT) based on...

scholarly journals Luminescent Supramolecular Nano- or Microstructures Formed in Aqueous Media by Amphiphile-Noble Metal Complexes

2020 ◽  
Vol 2020 ◽  
pp. 1-24 ◽  
Author(s):  
Carmen Cretu ◽  
Loredana Maiuolo ◽  
Domenico Lombardo ◽  
Elisabeta I. Szerb ◽  
Pietro Calandra
Keyword(s):  
Noble Metal ◽  
Smart Materials ◽  
Self Assembly ◽  
Noble Metals ◽  
Photophysical Properties ◽  
Aqueous Media ◽  
Molecular Architecture ◽  
Stimuli Responsive ◽  
Panoramic View ◽  
Amphiphilic Molecules

The involvement of metal ions within the self-assembly spontaneously occurring in surfactant-based systems gives additional and interesting features. The electronic states of the metal, together with the bonds that can be established with the organic amphiphilic counterpart, are the factors triggering new photophysical properties. Moreover, the availability of stimuli-responsive supramolecular amphiphile assemblies, able to disassemble in a back-process, provides reversible switching particularly useful in novel approaches and applications giving rise to truly smart materials. In particular, small amphiphiles with an inner distribution, within their molecular architecture, of various polar and apolar functional groups, can give a wide variety of interactions and therefore enriched self-assemblies. If it is joined with the opportune presence and localization of noble metals, whose chemical and photophysical properties are undiscussed, then very interesting materials can be obtained. In this minireview, the basic concepts on self-assembly of small amphiphilic molecules with noble metals are shown with particular reference to the photophysical properties aiming at furnishing to the reader a panoramic view of these exciting problematics. In this respect, the following will be shown: (i) the principles of self-assembly of amphiphiles that involve noble metals, (ii) examples of amphiphiles and amphiphile-noble metal systems as representatives of systems with enhanced photophysical properties, and (iii) final comments and perspectives with some examples of modern applications.

scholarly journals Current Strategies for Noble Metal Nanoparticle Synthesis

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Giyaullah Habibullah ◽  
Jitka Viktorova ◽  
Tomas Ruml
Keyword(s):  
Noble Metal ◽  
Noble Metals ◽  
Drug Carriers ◽  
Industrial Applications ◽  
Metal Nanoparticle ◽  
Noble Metal Nanoparticles ◽  
Synthesis Methods ◽  
Gold And Silver Nanoparticles ◽  
Diverse Range ◽  
The Past

AbstractNoble metals have played an integral part in human history for centuries; however, their integration with recent advances in nanotechnology and material sciences have provided new research opportunities in both academia and industry, which has resulted in a new array of advanced applications, including medical ones. Noble metal nanoparticles (NMNPs) have been of great importance in the field of biomedicine over the past few decades due to their importance in personalized healthcare and diagnostics. In particular, platinum, gold and silver nanoparticles have achieved the most dominant spot in the list, thanks to a very diverse range of industrial applications, including biomedical ones such as antimicrobial and antiviral agents, diagnostics, drug carriers and imaging probes. In particular, their superior resistance to extreme conditions of corrosion and oxidation is highly appreciated. Notably, in the past two decades there has been a tremendous advancement in the development of new strategies of more cost-effective and robust NMNP synthesis methods that provide materials with highly tunable physicochemical, optical and thermal properties, and biochemical functionalities. As a result, new advanced hybrid NMNPs with polymer, graphene, carbon nanotubes, quantum dots and core–shell systems have been developed with even more enhanced physicochemical characteristics that has led to exceptional diagnostic and therapeutic applications. In this review, we aim to summarize current advances in the synthesis of NMNPs (Au, Ag and Pt).

Process-Dependent Electronic Structure at Metallized GaAs Contacts

1992 ◽  
Vol 260 ◽  
Author(s):  
L. J. Brillson ◽  
I. M. Vitomirov ◽  
A. Raisanen ◽  
S. Chang ◽  
R. E. Viturro ◽  
...  
Keyword(s):  
Electronic Properties ◽  
Chemical Interaction ◽  
Deep Level ◽  
Multiple Roles ◽  
Atomic Scale ◽  
Photoemission Spectroscopy ◽  
Band Bending ◽  
Barrier Heights ◽  
Barrier Formation ◽  
Thermally Driven

ABSTRACTThe influence of metallization and processing on Schottky barrier formation provides the basis for one of several fruitful approaches for controlling junction electronic properties. Interface cathodo-and photoluminescence measurements reveal that electrically-active deep levels form on GaAs(100) surfaces and metal interfaces which depend on thermally-driven surface stoichiometry and reconstruction, chemical interaction, as well as surface misorientation and bulk crystal quality. These interface states are discrete and occur at multiple gap energies which can account for observed band bending. Characteristic trends in such deep level emission with interface processing provide guides for optimizing interface electronic behavior. Correspondingly, photoemission and internal photoemission spectroscopy measurements indicate self-consistent changes in barrier heights which may be heterogeneous and attributable to interface chemical reactions observed on a monolayer scale. These results highlight the multiple roles of atomic-scale structure in forming macroscopic electronic properties of compound semiconductor-metal junctions.

scholarly journals Rhodium Oxide Surface-Loaded Gas Sensors

Nanomaterials ◽  
2018 ◽  
Vol 8 (11) ◽  
pp. 892 ◽  
Author(s):  
Anna Staerz ◽  
Inci Boehme ◽  
David Degler ◽  
Mounib Bahri ◽  
Dmitry Doronkin ◽  
...  
Keyword(s):  
Metal Oxide ◽  
Noble Metal ◽  
Noble Metals ◽  
Metal Cluster ◽  
Empirical Work ◽  
Oxide Surface ◽  
Metallic State ◽  
X Ray ◽  
Rhodium Clusters ◽  
Sensing Characteristics

In order to increase their stability and tune-sensing characteristics, metal oxides are often surface-loaded with noble metals. Although a great deal of empirical work shows that surface-loading with noble metals drastically changes sensing characteristics, little information exists on the mechanism. Here, a systematic study of sensors based on rhodium-loaded WO3, SnO2, and In2O3—examined using X-ray diffraction, high-resolution scanning transmission electron microscopy, direct current (DC) resistance measurements, operando diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy, and operando X-ray absorption spectroscopy—is presented. Under normal sensing conditions, the rhodium clusters were oxidized. Significant evidence is provided that, in this case, the sensing is dominated by a Fermi-level pinning mechanism, i.e., the reaction with the target gas takes place on the noble-metal cluster, changing its oxidation state. As a result, the heterojunction between the oxidized rhodium clusters and the base metal oxide was altered and a change in the resistance was detected. Through measurements done in low-oxygen background, it was possible to induce a mechanism switch by reducing the clusters to their metallic state. At this point, there was a significant drop in the overall resistance, and the reaction between the target gas and the base material was again visible. For decades, noble metal loading was used to change the characteristics of metal-oxide-based sensors. The study presented here is an attempt to clarify the mechanism responsible for the change. Generalities are shown between the sensing mechanisms of different supporting materials loaded with rhodium, and sample-specific aspects that must be considered are identified.

Defect Spectroscopy on Damp-Heat Treated ZnO/CdS/Cu(In,Ga)(S,Se)2/Mo Heterojunction Solar Cells

2003 ◽  
Vol 58 (12) ◽  
pp. 691-702 ◽  
Author(s):  
C. Deibel ◽  
V. Dyakonov ◽  
J. Parisi
Keyword(s):  
Heat Treatment ◽  
Activation Energy ◽  
Solar Cells ◽  
Deep Level ◽  
Heat Exposure ◽  
Continuous Distribution ◽  
Open Circuit ◽  
Defect States ◽  
Band Bending ◽  
Test Cells

The changes of defect characteristics induced by accelerated lifetime tests on solar cells of the heterostructure ZnO/CdS/Cu(In,Ga)(S,Se)2/Mo are investigated. Encapsulated modules were shown to be stable against water vapor and oxygen under outdoor conditions, whereas the fill factor and open-circuit voltage of non-encapsulated test cells are reduced after prolonged damp heat treatment in the laboratory, leading to a reduced energy conversion efficiency. We subjected non-encapsulated test cells to extended damp heat exposure at 85 ◦C ambient temperature and 85% relative humidity for various time periods (6 h, 24 h, 144 h, 294 h, and 438 h). In order to understand the origin of the pronounced changes of the cells, we applied temperature-dependent current-voltage and capacitance voltage measurements, admittance spectroscopy, and deep-level transient spectroscopy. We observed the presence of electronic defect states which show an increasing activation energy due to damp heat exposure. The corresponding attempt-to-escape frequency and activation energy of these defect states obey the Meyer-Neldel relation. We conclude that the response originates from an energetically continuous distribution of defect states in the vicinity of the CdS/chalcopyrite interface. The increase in activation energy indicates a reduced band bending at the Cu(In,Ga)(S,Se)2 surface.We also observed changes in the bulk defect spectra due to the damp-heat treatment. - PACS: 73.20.hb, 73.61.Le

scholarly journals Comparative biological effects of spherical noble metal nanoparticles (Rh, Pd, Ag, Pt, Au) with 4–8 nm diameter

2018 ◽  
Vol 9 ◽  
pp. 2763-2774 ◽  
Author(s):  
Alexander Rostek ◽  
Marina Breisch ◽  
Kevin Pappert ◽  
Kateryna Loza ◽  
Marc Heggen ◽  
...  
Keyword(s):  
Metal Nanoparticles ◽  
Noble Metal ◽  
Noble Metals ◽  
Biological Effects ◽  
Human Mesenchymal Stem Cells ◽  
Average Diameter ◽  
Vinyl Pyrrolidone ◽  
Noble Metal Nanoparticles ◽  
Spherical Average ◽  
Size And Morphology

For a comparative cytotoxicity study, nanoparticles of the noble metals Rh, Pd, Ag, Pt, and Au (spherical, average diameter 4 to 8 nm) were prepared by reduction in water and colloidally stabilized with poly(N-vinyl pyrrolidone) (PVP). Thus, their shape, size, and surface functionalization were all the same. Size and morphology of the nanoparticles were determined by dynamic light scattering (DLS), analytical disc centrifugation (differential centrifugal sedimentation, DCS), and high-resolution transmission electron microscopy (HRTEM). Cell-biological experiments were performed to determine the effect of particle exposure on the viability of human mesenchymal stem cells (hMSCs). Except for silver, no adverse effect of any of the metal nanoparticles was observed for concentrations up to 50 ppm (50 mg L−1) incubated for 24 h, indicating that noble metal nanoparticles (rhodium, palladium, platinum, gold) that do not release ions are not cytotoxic under these conditions.

Sign in / Sign up

Export Citation Format

Share Document