Pressure Waves in Microscopic Simulations of Laser Ablation Leonid

1998 ◽  
Vol 538 ◽  
Author(s):  
V. Zhigilei ◽  
Barbara J. Garrison
Keyword(s):  
Boundary Condition ◽  
Laser Ablation ◽  
Laser Energy ◽  
Scale Up ◽  
Boundary Region ◽  
Dynamics Simulation ◽  
Pressure Waves ◽  
Absorption Region ◽  
Organic Solids ◽  
Direct Laser

AbstractLaser ablation of organic solids is a complex collective phenomenon that includes processes occurring at different length and time scales. A mesoscopic breathing sphere model developed recently for molecular dynamics simulation of laser ablation and damage of organic solids has significantly expanded the length-scale (up to hundreds of nanometers) and the time-scale (up to nanoseconds) of the simulations. The laser induced buildup of a high pressure within the absorbing volume and generation of the pressure waves propagating from the absorption region poses an additional challenge for molecular-level simulation. A new dynamic boundary condition is developed to minimize the effects of the reflection of the wave from the boundary of the computational cell. The boundary condition accounts for the laser induced pressure wave propagation as well as the direct laser energy deposition in the boundary region.

Laser Ablation of Nanoparticles: A Molecular Dynamics Study

2015 ◽  
Vol 1112 ◽  
pp. 120-123 ◽  
Author(s):  
Riser Fahdiran ◽  
Herbert M. Urbassek
Keyword(s):  
Molecular Dynamics ◽  
Laser Ablation ◽  
Energy Input ◽  
Laser Energy ◽  
Spherical Shape ◽  
Interatomic Interaction ◽  
Dynamics Simulation ◽  
Lennard Jones ◽  
High Intensity Laser ◽  
Intensity Laser

We study laser ablation of nanoparticles (NPs). The interaction of a high-intensity laser pulse with NPs brings the NP into a highly non-equilibrium state. Depending on the energy input from the laser, it will melt and may fragment and evaporate off atoms and clusters. We employ molecular dynamics simulation to study this interaction since thermodynamic properties can be extracted from output data of this simulation. The interatomic interaction is modeled by a Lennard-Jones (LJ) potential. The intensity of the laser is above the ablation threshold. The NP has been chosen to have a spherical shape with diameter 50 s in LJ units. The laser energy is given to the NP instantaneously at the beginning of the simulation and homogenously to all atoms; it corresponds to an energy input of 5.4 e per atom. The simulation is continued up to a time 200 t in LJ units. Temperature-density phase-space trajectories show that the nanoparticle density and temperature strongly decrease after the irradiation. The pressure in the sphere becomes strongly tensile after irradiation. The ablation proceeds by spallation of the irradiated cluster. We provide an analysis of the fragments produced by the ablation of the spherical NP. Our results are contrasted to the case of laser ablation of a thin-film target.

Molecular Dynamics Simulation of the Ablation Process in Ultrashort Pulsed Laser Machining of Polycrystalline Diamond

2012 ◽  
Vol 500 ◽  
pp. 351-356 ◽  
Author(s):  
Zeng Qiang Li ◽  
Jun Wang ◽  
Qi Wu
Keyword(s):  
Molecular Dynamics ◽  
Laser Ablation ◽  
Molecular Dynamics Simulation ◽  
Grain Boundaries ◽  
Laser Energy ◽  
Pulsed Laser ◽  
Polycrystalline Diamond ◽  
Pulsed Laser Ablation ◽  
Dynamics Simulation ◽  
Ultrashort Pulsed Laser

The mechanism of ultrashort pulsed laser ablation of polycrystalline diamond (PCD) is investigated using molecular dynamics simulation. The simulation model provides a detailed atomic-level description of the laser energy deposition to PCD specimens and is verified by an experiment using 300 fs laser irradiation of a PCD sample. It is found that grain boundaries play an important role in the laser ablation. Melting starts from the grain boundaries since the atoms in these regions have higher potential energy and are melted more easily than the perfect diamond. Non-homogeneous melting then takes place at these places, and the inner crystal grains melt more easily in liquid surroundings presented by the melting grain boundaries. Moreover, the interplay of the two processes, photomechanical spallation and evaporation, are found to account for material removal in ultrashort pulsed laser ablation of PCD.

Molecular Dynamics Simulation of Ultrafast Laser Ablation of Fused Silica

2006 ◽  
Author(s):  
Changrui Cheng ◽  
Xianfan Xu ◽  
Yaguo Wang ◽  
Alejandro Strachan
Keyword(s):  
Molecular Dynamics ◽  
Laser Ablation ◽  
Ultrafast Lasers ◽  
Laser Energy ◽  
Laser Pulses ◽  
Fused Silica ◽  
Ultrafast Laser ◽  
Dynamics Simulation ◽  
Free Electrons ◽  
Ultrafast Laser Ablation

In recent decades, ultrafast lasers have been used successfully to micro-machine fused silica. The high intensity laser pulses first excite valence electrons to the conduction band via photoionization and avalanche ionization. The excited free electrons absorb laser energy, and transfer its energy to the ions, resulting in the temperature rise. This ionization leads to significant changes in Coulomb forces among the atoms. Both thermal and non-thermal (Coulomb explosion) ablation processes have been discussed in the literature [1]. This work applies molecular dynamics technique to study the interaction between ultrafast laser pulses and fused silica and the resulting ablation. The main goal of this work is to investigate the ultrafast laser ablation process of fused silica, and to reveal the mechanisms leading to the material's removal. In this MD simulation, the equilibrium state of fused silica is first established at 300 K, and the laser heating and material removal processes are simulated. The ionization of the material and the energy coupling between the laser beam and free electrons and ions are considered. Thermal and non-thermal mechanisms of fused silica ablation are discussed based on calculation results.

The Interactions of Microhole Sidewall With Plasma induced by Femtosecond Laser Ablation in High-Aspect-Ratio Microholes

2012 ◽  
Vol 134 (1) ◽  
Author(s):  
Benxin Wu ◽  
Sha Tao ◽  
Shuting Lei
Keyword(s):  
Laser Ablation ◽  
Aspect Ratio ◽  
High Aspect Ratio ◽  
Material Removal ◽  
Laser Energy ◽  
Spatial Scales ◽  
Femtosecond Laser Ablation ◽  
Plasma Energy ◽  
Direct Laser ◽  
Fs Laser

High-aspect-ratio microholes have many important applications, but their drilling is very challenging. Femtosecond (fs) laser ablation provides a potential solution, but involves many complicated physical processes that have not been well understood, which have hindered its practical application. One of these is that the plasma induced by laser ablation at the hole bottom will transfer some of its energy to the hole sidewall as it expands in the microhole. The plasma–sidewall interaction has been rarely studied in literature, and it is still not clear if or not the energy transferred from the plasma is sufficient to cause significant material removal from the sidewall. Direct time-resolved observations are extremely difficult due to the small temporal/spatial scales and the spatial constraint inside the hole, while the sidewall characterization after laser ablation is difficult to distinguish between the possible material removal due to plasma energy transfer and that due to direct laser energy absorption by the sidewall. In this paper, a physics-based model is applied as the investigation tool to study the plasma–sidewall interaction in fs laser drilling of high-aspect-ratio microholes. It has been found that for the studied conditions the energy transferred from the plasma is not sufficient to cause significant material removal from the sidewall through any thermally induced phase change process.

scholarly journals Short-Pulse Lasers: A Versatile Tool in Creating Novel Nano-/Micro-Structures and Compositional Analysis for Healthcare and Wellbeing Challenges

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 712
Author(s):  
Ahmed Al-Kattan ◽  
David Grojo ◽  
Christophe Drouet ◽  
Alexandros Mouskeftaras ◽  
Philippe Delaporte ◽  
...  
Keyword(s):  
Laser Ablation ◽  
Surface Engineering ◽  
Short Pulse ◽  
Chemical Properties ◽  
Compositional Analysis ◽  
Periodic Patterns ◽  
Laser Ablation In Liquid ◽  
Micro Scale ◽  
Direct Laser ◽  
Contact Free

Driven by flexibility, precision, repeatability and eco-friendliness, laser-based technologies have attracted great interest to engineer or to analyze materials in various fields including energy, environment, biology and medicine. A major advantage of laser processing relies on the ability to directly structure matter at different scales and to prepare novel materials with unique physical and chemical properties. It is also a contact-free approach that makes it possible to work in inert or reactive liquid or gaseous environment. This leads today to a unique opportunity for designing, fabricating and even analyzing novel complex bio-systems. To illustrate this potential, in this paper, we gather our recent research on four types of laser-based methods relevant for nano-/micro-scale applications. First, we present and discuss pulsed laser ablation in liquid, exploited today for synthetizing ultraclean “bare” nanoparticles attractive for medicine and tissue engineering applications. Second, we discuss robust methods for rapid surface and bulk machining (subtractive manufacturing) at different scales by laser ablation. Among them, the microsphere-assisted laser surface engineering is detailed for its appropriateness to design structured substrates with hierarchically periodic patterns at nano-/micro-scale without chemical treatments. Third, we address the laser-induced forward transfer, a technology based on direct laser printing, to transfer and assemble a multitude of materials (additive structuring), including biological moiety without alteration of functionality. Finally, the fourth method is about chemical analysis: we present the potential of laser-induced breakdown spectroscopy, providing a unique tool for contact-free and space-resolved elemental analysis of organic materials. Overall, we present and discuss the prospect and complementarity of emerging reliable laser technologies, to address challenges in materials’ preparation relevant for the development of innovative multi-scale and multi-material platforms for bio-applications.

A comparative study of direct laser ablation and laser-induced plasma-assisted ablation on glass surface

2021 ◽  
pp. 103737
Author(s):  
Yani Xia ◽  
Xiubing Jing ◽  
Dawei Zhang ◽  
Fujun Wang ◽  
Syed Husain Imran Jaffery ◽  
...  
Keyword(s):  
Laser Ablation ◽  
Comparative Study ◽  
Glass Surface ◽  
Laser Induced Plasma ◽  
Direct Laser

Cu-Direct Laser Drilling of Blind Via-Hole in Multi-Layer PWBs: Influence of Surface Treatment on Drilled Hole Quality

2009 ◽  
Author(s):  
Toshiki Hirogaki ◽  
Eiichi Aoyama ◽  
Keiji Ogawa ◽  
Tsukasa Ayuzawa
Keyword(s):  
Surface Treatment ◽  
Co2 Laser ◽  
Copper Foil ◽  
Laser Energy ◽  
Copper Surface ◽  
Laser Drilling ◽  
Hole Quality ◽  
Direct Laser ◽  
Overhang Length ◽  
Direct Drilling

This report describes the quality assessment of Blind Via Holes (BVHs) of Printed Wiring Boards (PWBs) drilled by a CO2 laser using Cu-direct drilling. In the Cu-direct drilling method, the copper foil and the build-up layer are melted at the same time, and the surface is treated to increase the laser energy absorbed by the copper foil since an untreated copper surface reflects most of the 10.6-μm-wavelength CO2 laser beam. However, there are few reports dealing with Cu-direct laser drilling of PWBs. In addition, when copper and resin with different processing thresholds are drilled at the same time, occurrences of a defect called overhang have been observed. So, in this report, first we propose a new method using thermography to measure the absorptance of a PWB surface for a CO2 laser. Moreover, we investigate how surface treatment of the outer copper foil influences the quality of a laser-drilled hole. Then, we observe the circumference of a point irradiated with the CO2 laser and explain how melting processes are different from surface treatment. Finally, based on the research we establish a method in order to cut down the overhang length as a parameter of drilled-hole quality. We also show that a high absorptance improves BVH quality.

scholarly journals Preparation and Properties of Superconducting thin Films by Excimer Laser Ablation

1990 ◽  
Vol 191 ◽  
Author(s):  
Michael E. Geusic ◽  
Alan F. Stewart ◽  
Larry R. Pederson ◽  
William J. Weber ◽  
Kenneth R. Marken ◽  
...  
Keyword(s):  
Thin Films ◽  
Laser Ablation ◽  
Excimer Laser ◽  
Laser Energy ◽  
Substrate Surface ◽  
Xrd Analysis ◽  
Zero Field ◽  
Superconducting Transition ◽  
X Ray Diffraction ◽  
Excimer Laser Ablation

ABSTRACTExcimer laser ablation with an in situ heat treatment was used to prepare high quality superconducting YBa2Cu3O7−x thin films on (100)-SrTiO3 and (100)-LaAlO3 substrates. A pulsed excimer laser (XeCl; 308 nm) was used to ablate a rotating, bulk YBa2Cu3O7−x target at a laser energy density of 2–3 J/cm2. Based on four-probe dc resistance measurements, the films exhibited superconducting transition temperatures (Tc, midpoint) of 88 and 87K with 2K (90–10%) transition widths for SrTiO3 and LaAlO3, respectively. Transport critical current densities (Jc) measured at 77K were 2 × 106 and 1 × 106 A/cm2 in zero field for SrTiO3 and LaAlO3, respectively. X-ray diffraction (XRD) analysis showed the films to be highly oriented, with the c-axis perpendicular to the substrate surface.

SCnS Linear Chain Production by Direct Laser Ablation

2003 ◽  
Vol 107 (45) ◽  
pp. 9547-9553 ◽  
Author(s):  
Andrei Burnin ◽  
Joseph J. BelBruno
Keyword(s):  
Laser Ablation ◽  
Linear Chain ◽  
Direct Laser
Sign in / Sign up

Export Citation Format

Share Document