Extended Defects in Amorphized and Rapid-Thermally Annealed Silicon

1985 ◽  
Vol 52 ◽  
Author(s):  
D. M. Maher ◽  
R. V. Knoell ◽  
M. B. Ellington ◽  
D. C. Jacobson
Keyword(s):  
Solid Phase ◽  
Analytical Techniques ◽  
Extended Defects ◽  
Final States ◽  
Defect States ◽  
Extended Defect ◽  
Ion Channeling ◽  
Transmission Electron ◽  
Initial States

ABSTRACTThe characterization of microstructures is fundamentally important to investigations of amorphization which is induced by ion implantation and recrystallization which occurs by solid-phase, epitaxial regrowth. In this paper, microstructures of amorphized, partially regrown and fully regrown layers are described in terms of extended-defect states of the material. Initial states (i.e. amorphized) and final states (i.e. solid-phase regrown and then reordered) are defined. Transmission electron microscopy and Rutherford backscattering/ion-channeling are the analytical techniques which are used in the characterization.

The Use of Advanced Analytical Techniques for Characterization of the Chemical, Physical, and Crystallographic Nature of a Surface

1973 ◽  
Vol 31 ◽  
pp. 132-133 ◽  
Author(s):  
R. E. Herfert
Keyword(s):  
Surface Characterization ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Depth Of Penetration ◽  
X Ray ◽  
The Past ◽  
Transmission Electron ◽  
Scanning Electron

Studies of the nature of a surface, either metallic or nonmetallic, in the past, have been limited to the instrumentation available for these measurements. In the past, optical microscopy, replica transmission electron microscopy, electron or X-ray diffraction and optical or X-ray spectroscopy have provided the means of surface characterization. Actually, some of these techniques are not purely surface; the depth of penetration may be a few thousands of an inch. Within the last five years, instrumentation has been made available which now makes it practical for use to study the outer few 100A of layers and characterize it completely from a chemical, physical, and crystallographic standpoint. The scanning electron microscope (SEM) provides a means of viewing the surface of a material in situ to magnifications as high as 250,000X.

Comparison of Ion-Milling Techniques For Cross-Sectional TEM of Semiconductors

1985 ◽  
Vol 43 ◽  
pp. 166-167
Author(s):  
Julia T. Luck ◽  
C. W. Boggs ◽  
S. J. Pennycook
Keyword(s):  
Analytical Techniques ◽  
Sample Surface ◽  
Ion Milling ◽  
Cross Sectional ◽  
Reliable Technique ◽  
Near Surface ◽  
Transmission Electron ◽  
Thin Region ◽  
Transient Thermal

The use of cross-sectional Transmission Electron Microscopy (TEM) has become invaluable for the characterization of the near-surface regions of semiconductors following ion-implantation and/or transient thermal processing. A fast and reliable technique is required which produces a large thin region while preserving the original sample surface. New analytical techniques, particularly the direct imaging of dopant distributions, also require good thickness uniformity. Two methods of ion milling are commonly used, and are compared below. The older method involves milling with a single gun from each side in turn, whereas a newer method uses two guns to mill from both sides simultaneously.

TEM characterization of Au/Polysilicon interactions

1990 ◽  
Vol 48 (4) ◽  
pp. 650-651
Author(s):  
N. David Theodore ◽  
Leslie H. Allen ◽  
C. Barry Carter ◽  
James W. Mayer
Keyword(s):  
Solid Phase ◽  
Single Crystal Silicon ◽  
Chemical Vapor ◽  
Electrical Contacts ◽  
Silicon Substrates ◽  
Crystal Silicon ◽  
Transmission Electron ◽  
Polysilicon Films ◽  
The Stability

Metal/polysilicon investigations contribute to an understanding of issues relevant to the stability of electrical contacts in semiconductor devices. These investigations also contribute to an understanding of Si lateral solid-phase epitactic growth. Metals such as Au, Al and Ag form eutectics with Si. reactions in these metal/polysilicon systems lead to the formation of large-grain silicon. Of these systems, the Al/polysilicon system has been most extensively studied. In this study, the behavior upon thermal annealing of Au/polysilicon bilayers is investigated using cross-section transmission electron microscopy (XTEM). The unique feature of this system is that silicon grain-growth occurs at particularly low temperatures ∽300°C).Gold/polysilicon bilayers were fabricated on thermally oxidized single-crystal silicon substrates. Lowpressure chemical vapor deposition (LPCVD) at 620°C was used to obtain 100 to 400 nm polysilicon films. The surface of the polysilicon was cleaned with a buffered hydrofluoric acid solution. Gold was then thermally evaporated onto the samples.

Solute Segregation and Dynamics of Solid-Phase Crystallization In in and Sb-Implanted Silicon

1981 ◽  
Vol 4 ◽  
Author(s):  
J. Narayan ◽  
G. L. Olson ◽  
O. W. Holland
Keyword(s):  
Laser Power ◽  
Solid Phase ◽  
Solute Segregation ◽  
Dislocation Loops ◽  
Solid Phase Crystallization ◽  
Time Resolved ◽  
Plan View ◽  
Ion Channeling ◽  
Retrograde Solubility ◽  
Transmission Electron

ABSTRACTTime-resolved-reflectivity measurements have been combined with transmission electron microscopy (cross-section and plan-view), Rutherford backscattering and ion channeling techniques to study the details of laser induced solid phase epitaxial growth in In+ and Sb+ implanted silicon in the temperature range from 725 to 1500 °K. The details of microstructures including the formation of polycrystals, precipitates, and dislocations have been correlated with the dynamics of crystallization. There were limits to the dopant concentrations which could be incorporated into substitutional lattice sites; these concentrations exceeded retrograde solubility limits by factors up to 70 in the case of the Si-In system. The coarsening of dislocation loops and the formation of a/2<110>, 90° dislocations in the underlying dislocation-loop bands are described as a function of laser power.

GROWTH AND CHARACTERIZATION OF EPITAXIAL Si/CoSi2 AND Si/CoSi2/Si HETEROSTRUCTURES

1985 ◽  
Vol 56 ◽  
Author(s):  
B.D. HUNT ◽  
N. LEWIS ◽  
E.L. HALL ◽  
L.G. JTURNER ◽  
L.J. SCHOWALTER ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Growth Temperature ◽  
Molecular Beam ◽  
Solid Phase ◽  
Solid Phase Epitaxy ◽  
Cross Sectional ◽  
Reactive Deposition ◽  
Ion Channeling ◽  
Formation Method

AbstractThin (<200Å), epitaxial CoSi2 films have been grown on (111) Siwafers in a UHV system using a variety of growth techniques including solid phase epitaxy (SPE), reactive deposition epitaxy (RDE), and molecular beam epitaxy (MBE). SEN and TEN studies reveal significant variations in the epitaxial silicide surface morphology as a function of the sillciqd formation method. Pinhole densities are generally greater than 107 cm-2, although some reduction can be achieved by utilizing proper growth techniques. Si epilayers were deposited over the CoSi2 films inthe temperature range from 550ºC to 800ºC, and the reesuulttinng structures have been characterized using SEM, cross—sectional TEN, and ion channeling measurements. These measurements show that the Si epitaxial quality increases with growth temperature, although the average Si surface roughness and the CoSi2 pinhole density also increase as the growth temperature is raised.

Characterization of Spent Catalysts during Hydrodemetallization of Atmosphere Residue

2011 ◽  
Vol 236-238 ◽  
pp. 538-542
Author(s):  
Yong Jun Liu
Keyword(s):  
Chemical Properties ◽  
Analytical Techniques ◽  
Resonance Spectroscopy ◽  
Gravimetric Analysis ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Physico Chemical ◽  
Spent Catalysts ◽  
C Nmr

The deactivation behavior of industrial hydrodemetallization catalysts was investigated in the presented work. The main objective of the study is to contribute to a better understanding of the nature of the coke and metal deposition on the used catalysts by applying chemical analysis and various advanced analytical techniques, such as X-ray diffraction analysis (XRD), thermal gravimetric analysis (TGA), transmission electron microscopy (TEM), and solid-state carbon-13 nuclear magnetic resonance spectroscopy (13C NMR). The results are discussed scientifically based on the physico–chemical properties of origin and used catalysts.

Stability And Precipitation Kinetics In Si1-yCy/Si and Si1-x-yGexC/Si Heterostructures Prepared by Solid Phase Epitaxy

1993 ◽  
Vol 321 ◽  
Author(s):  
J. W. Strane ◽  
S. T. Picraux ◽  
H. J. Stein ◽  
S. R. Lee ◽  
J. Candelaria ◽  
...  
Keyword(s):  
Structural Changes ◽  
Driving Forces ◽  
Solid Phase ◽  
Strain Relaxation ◽  
Solid Phase Epitaxy ◽  
Extended Defects ◽  
Plan View ◽  
Nucleation Barrier ◽  
Transmission Electron ◽  
The Stability

ABSTRACTThis study investigates the stability of Metastable Si1-yCy/Si heterostructures during rapid thermal annealing (RTA) over a temperature range of 1000 – 1150° C Heterostructures of Si1-yCy/Si and Si1-x-yGexCy/Si (x=0.077, y ≤ .0014) were formed by solid phase epitaxy from C implanted, preamorphized substrates using a 30 Minute 700° C anneal in N2. The occupancy of C in substitution lattice sites was monitored by Fourier Transform Infrared Absorption spectroscopy. The layer strain was monitored by rocking curve x-ray diffraction and the structural changes in the layers were determined using plan-view and X-sectional transmission electron Microscopy (TEM). For anneals of 1150° C or above, all the substitutional C was lost from the Si lattice after 30 seconds. TEM verified that the strain relaxation was the result of C precipitating into highly aligned βSiC particles rather than by the formation of extended defects. No nucleation barrier was observed for the loss of substitutional C Preliminary results will also be discussed for Si1-x-yGexCy/Si heterostructures where there is the additional factor of the competition between strain energy and the chemical driving forces.

The Behavior of Ion-Implanted Hydrogen in Gallium Nitride

1998 ◽  
Vol 537 ◽  
Author(s):  
S. M. Myers ◽  
T.J. Headley ◽  
C.R. Hills ◽  
J. Han ◽  
G.A. Petersen ◽  
...  
Keyword(s):  
Bound States ◽  
Bubble Formation ◽  
Extended Defects ◽  
Wurtzite Phase ◽  
Ion Channeling ◽  
Transmission Electron ◽  
Microstructural Effects ◽  
Formation And Evolution ◽  
Ion Implanted

AbstractHydrogen was ion-implanted into wurtzite-phase GaN, and its transport, bound states, and microstructural effects during annealing up to 980°C were investigated by nuclear-reaction profiling, ion-channeling analysis, transmission electron microscopy, and infrared (IR) vibrational spectroscopy. At implanted concentrations vl at.%, faceted H 2 bubbles formed, enabling identification of energetically preferred surfaces, examination of passivating N-H states on these surfaces, and determination of the diffusivity-solubility product of the H. Additionally, the formation and evolution of point and extended defects arising from implantation and bubble formation were characterized. At implanted H concentrations ^0.1 at.%, bubble formation was not observed, and ion-channeling analysis indicated a defect-related H site located within the [0001] channel.

Sign in / Sign up

Export Citation Format

Share Document