Sheet and Tube Organosilicon Polymers

1998 ◽  
Vol 519 ◽  
Author(s):  
D. E. Katsoulist ◽  
T. C.-S. Chaot ◽  
E. A. McQuistont ◽  
Chenggang Chen ◽  
Malcolm E. Kenney ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Solid State ◽  
Interlayer Spacing ◽  
Heterogeneous Reactions ◽  
Naturally Occurring ◽  
Pendent Groups ◽  
Sheet Silicates ◽  
Siloxane Polymers ◽  
Organosilicon Polymers

AbstractReaction of chlorosilanes with sheet silicates, such as the naturally occurring apophyllite, [Ca4Si8O2O(F, OH).8H2O] results in the formation of sheet organofunctional siloxane polymers. Similarly, reaction of chlorosilanes with the tube silicate K2CuSi4O10results in the formation of tube organofunctional siloxane polymers. Representative polymers have been characterized by XRD, KR, XPS and solid state 29Si NMR. The interlayer spacing of the sheet polymers varies with the type of the group pendent on the sheet. When the organofunctional pendent groups of the sheet polymers contain reactive sites, further reactivity can be demonstrated with heterogeneous reactions such as hydrosilation. The sheet polymers behave as very effective thickeners of siloxane fluids. Dispersions of them in siloxane fluids exhibit thixotropic properties. The organosilicon polymers have the potential to show useful chemical, thermal, rheological and mechanical properties

scholarly journals Microstructure and mechanical properties of solid state recycled 4Cr5MoSiV (H11) steel prepared by powder metallurgy

2021 ◽  
pp. 100184
Author(s):  
Gyanendra Bhatta ◽  
Luis De Los Santos Valladares ◽  
Xinggang Liu ◽  
Zhaojun Ma ◽  
A. Bustamante Domínguez ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Powder Metallurgy ◽  
Solid State ◽  
Microstructure And Mechanical Properties

scholarly journals Nanostructure, Self-Assembly, Mechanical Properties, and Antioxidant Activity of a Lupin-Derived Peptide Hydrogel

Biomedicines ◽  
2021 ◽  
Vol 9 (3) ◽  
pp. 294
Author(s):  
Raffaele Pugliese ◽  
Anna Arnoldi ◽  
Carmen Lammi
Keyword(s):  
Mechanical Properties ◽  
Antioxidant Activity ◽  
Self Assembly ◽  
Antioxidant Activities ◽  
Functional Materials ◽  
Cd Spectroscopy ◽  
Beneficial Effects ◽  
Naturally Occurring ◽  
New Research ◽  
Peptide Hydrogel

Naturally occurring food peptides are frequently used in the life sciences due to their beneficial effects through their impact on specific biochemical pathways. Furthermore, they are often leveraged for applications in areas as diverse as bioengineering, medicine, agriculture, and even fashion. However, progress toward understanding their self-assembling properties as functional materials are often hindered by their long aromatic and charged residue-enriched sequences encrypted in the parent protein sequence. In this study, we elucidate the nanostructure and the hierarchical self-assembly propensity of a lupin-derived peptide which belongs to the α-conglutin (11S globulin, legumin-like protein), with a straightforward N-terminal biotinylated oligoglycine tag-based methodology for controlling the nanostructures, biomechanics, and biological features. Extensive characterization was performed via Circular Dichroism (CD) spectroscopy, Fourier Transform Infrared spectroscopy (FT-IR), rheological measurements, and Atomic Force Microscopy (AFM) analyses. By using the biotin tag, we obtained a thixotropic lupin-derived peptide hydrogel (named BT13) with tunable mechanical properties (from 2 to 11 kPa), without impairing its spontaneous formation of β-sheet secondary structures. Lastly, we demonstrated that this hydrogel has antioxidant activity. Altogether, our findings address multiple challenges associated with the development of naturally occurring food peptide-based hydrogels, offering a new tool to both fine tune the mechanical properties and tailor the antioxidant activities, providing new research directions across food chemistry, biochemistry, and bioengineering.

scholarly journals Proton-conductive coordination polymer glass for solid-state anhydrous proton batteries

2021 ◽  
Vol 12 (16) ◽  
pp. 5818-5824
Author(s):  
Nattapol Ma ◽  
Soracha Kosasang ◽  
Atsushi Yoshida ◽  
Satoshi Horike
Keyword(s):  
Mechanical Properties ◽  
Solid State ◽  
Coordination Polymer ◽  
Proton Battery ◽  
Polymer Glass

Melt-quenched coordination polymer glass shows exclusive H+ conductivity (8.0 × 10−3 S cm−1 at 120 °C, anhydrous) and optimal mechanical properties (42.8 Pa s at 120 °C), enables the operation of an all-solid-state proton battery from RT to 110 °C.

Mechanical Properties of Thixoformed 7075 Feedstock Produced via the Direct Thermal Method

2015 ◽  
Vol 651-653 ◽  
pp. 1569-1574 ◽  
Author(s):  
Asnul Hadi Ahmad ◽  
Sumsun Naher ◽  
Dermot Brabazon
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Solid State ◽  
Tensile Testing ◽  
Thermal Method ◽  
Test Unit ◽  
Pouring Temperature ◽  
Injection Test ◽  
Semi Solid ◽  
Conventionally Cast

Abstracts: This paper presents an overview of measured mechanical properties of thixoformed aluminium 7075 feedstock produced by the direct thermal method (DTM). The DTM feedstock billets were processed with a pouring temperature of 685 °C and holding periods of 20 s, 40 s and 60 s before being quenched and subsequently thixoformed. A conventionally cast feedstock billet was produced with a pouring temperature of 685 °C and was allowed to solidify without quenching. The feedstock billets were later formed by an injection test unit in the semi-solid state. Tensile testing was then conducted on the thixoformed feedstock billets. Tensile properties for 7075 DTM thixoformed feedstock billets were found significantly influenced by the thixoformed component density. Samples with longer holding times were found to have higher density and higher tensile strength.

The Fabricated Collagen-Based Nano-Hydroxyapatite/β-Tricalcium Phosphate Scaffolds

2012 ◽  
Vol 506 ◽  
pp. 57-60 ◽  
Author(s):  
M. Ebrahimi ◽  
Naruporn Monmaturapoj ◽  
S. Suttapreyasri ◽  
P. Pripatnanont
Keyword(s):  
Mechanical Properties ◽  
Solid State ◽  
Calcium Phosphate ◽  
Biphasic Calcium Phosphate ◽  
Single Phase ◽  
Physical And Mechanical Properties ◽  
Total Porosity ◽  
Xrd Pattern ◽  
Collagen Coating ◽  
Dimensional Shrinkage

The biphasic calcium phosphate (BCP) concept was introduced to overcome disadvantages of single phase biomaterials. In this study, we prepared BCP from nanoHA and β-TCP that were synthesized via a solid state reaction. Three different ratios of pure BCP and collagen-based BCP scaffolds (%HA/%β-TCP; 30/70, 40/60 and 50/50) were produced using a polymeric sponge method. Physical and mechanical properties of all materials and scaffolds were investigated. XRD pattern proved the purity of each HA, β-TCP and BCP. SEM showed overall distribution of macropores (80-200 µm) with appropriate interconnected porosities. Total porosity of pure BCP (93% ± 2) was found to be higher than collagen-based BCP (85%± 3). It was observed that dimensional shrinkage of larger scaffold (39% ± 4) is lower than smaller one (42% ± 5) and scaffolds with higher HA (50%) ratio experienced greater shrinkage than those with higher β-TCP (70%) ratio (45% ±3 and 36% ±1 respectively). Mechanical properties of both groups tend to be very low and collagen coating had no influence on mechanical behavior. Further studies may improve the physical properties of these composite BCP.

Creep and Anisotropy of Free-Standing Lithium Metal Foils in an Industrial Dry Room

2021 ◽  
pp. 1-32
Author(s):  
Lara Dienemann ◽  
Anil Saigal ◽  
Michael A Zimmerman
Keyword(s):  
Mechanical Properties ◽  
Solid State ◽  
High Volume ◽  
Dominant Mode ◽  
Lithium Metal ◽  
Free Standing ◽  
Metal Anode ◽  
Lithium Metal Batteries ◽  
Lithium Metal Anode ◽  
Solid State Batteries

Abstract Commercialization of energy-dense lithium metal batteries relies on stable and uniform plating and stripping on the lithium metal anode. In electrochemical-mechanical modeling of solid-state batteries, there is a lack of consideration of specific mechanical properties of battery-grade lithium metal. Defining these characteristics is crucial for understanding how lithium ions plate on the lithium metal anode, how plating and stripping affect deformation of the anode and its interfacing material, and whether dendrites are suppressed. Recent experiments show that the dominant mode of deformation of lithium metal is creep. This study measures the time and temperature dependent mechanics of two thicknesses of commercial lithium anodes inside an industrial dry room, where battery cells are manufactured at high volume. Furthermore, a directional study examines the anisotropic microstructure of 100 µm thick lithium anodes and its effect on bulk creep mechanics. It is shown that these lithium anodes undergo plastic creep as soon as a coin cell is manufactured at a pressure of 0.30 MPa, and achieving thinner lithium foils, a critical goal for solid-state lithium batteries, is correlated to anisotropy in both lithium's microstructure and mechanical properties.

scholarly journals Effect of Intercalation Structure of Organo-Modified Montmorillonite/Polylactic Acid on Wheat Straw Fiber/Polylactic Acid Composites

Polymers ◽  
2018 ◽  
Vol 10 (8) ◽  
pp. 896 ◽  
Author(s):  
Qiqi Fan ◽  
Guangping Han ◽  
Wanli Cheng ◽  
Huafeng Tian ◽  
Dong Wang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermogravimetric Analysis ◽  
Wheat Straw ◽  
Polylactic Acid ◽  
Low Cost ◽  
Interlayer Spacing ◽  
Positive Influence ◽  
X Ray Diffraction ◽  
Ft Ir ◽  
Ir Analysis

In this work, an easy way to prepare the polylactic acid (PLA)/wheat straw fiber (WSF) composite was proposed. The method involved uses either the dopamine-treated WSF or the two-step montmorillonite (MMT)-modified WSF as the filler material. In order to achieve the dispersibility and exfoliation of MMT, it was modified by 12-aminododecanoic acid using a two-step route. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were performed to characterize the modified MMT and the coated WSF. As for the properties of PLA/WSF composites, some thermal (using Fourier transform infrared spectroscopy (FT-IR) and thermogravimetric analysis) and mechanical properties (flexural, tensile, and impact) were analyzed. The results showed that the dopamine was successfully coated onto the WSF. Furthermore, Na-MMT was successfully transformed to organo-montmorillonite (OMMT) and formed an exfoliated structure. In addition, a better dispersion of MMT was obtained using the two-step treatment. The interlayer spacing of modified MMT was 4.06 nm, which was 123% higher than that of the unmodified MMT. Additionally, FT-IR analysis suggested that OMMT diffused into the PLA matrix. The thermogravimetric analysis (TGA) showed that a higher thermal stability of PLA/WSF composites was obtained for the modified MMT and dopamine. The results also showed that both the dopamine treated WSF and the two-step-treated MMT exhibited a positive influence on the mechanical properties of PLA/WSF composites, especially on the tensile strength, which increased by 367% compared to the unmodified precursors. This route offers researchers a potential scheme to improve the thermal and mechanical properties of PLA/WSF composites in a low-cost way.

Influence of Heat Treatment on Microstrudture and Mechanical Properties of AZ31B Magnesium Alloy Prepared by Solid-State Recycling

2012 ◽  
Vol 271-272 ◽  
pp. 17-20
Author(s):  
Shu Yan Wu ◽  
Ze Sheng Ji ◽  
Chun Ying Tian ◽  
Ming Zhong Wu
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Solid State ◽  
Magnesium Alloy ◽  
Static Recrystallization ◽  
Annealing Treatment ◽  
Az31b Magnesium Alloy ◽  
Heat Treated ◽  
Elongation To Failure ◽  
Strength And Ductility

This work is to study the influence of heat treatment on microstrudture and mechanical properties of AZ31B magnesium alloy prepared by solid -state recycling. AZ31B magnesium alloy chips were recycled by hot extruding. Three different heat treatments were conducted for recycled alloy. Mechanical properties and microstructure of the recycled specimen and heat treated specimen were investigated. 300°C×2h annealing specimen exhibits finer grain due to static recrystallization, and microstructure of 400°C×2h annealing specimen becomes more coarse. 300°C×2h annealing treatment improves obviously strength and ductility of recycled alloy. Ultimate tensile strength of alloy decreases and elongation to failure increases after 400°C×2h annealing. Grain size, dislocation density and bonding of chips have an effect on the elongation of recycled materials. 190°C×8h ageing has no influence on microstructure and mechanical properties of recycled alloy.

scholarly journals Surface Modification of Bacterial Cellulose for Biomedical Applications

2022 ◽  
Vol 23 (2) ◽  
pp. 610
Author(s):  
Teresa Aditya ◽  
Jean Paul Allain ◽  
Camilo Jaramillo ◽  
Andrea Mesa Restrepo
Keyword(s):  
Mechanical Properties ◽  
Drug Delivery ◽  
Tissue Engineering ◽  
Surface Modification ◽  
Bacterial Cellulose ◽  
Biomedical Applications ◽  
Human Tissues ◽  
Naturally Occurring ◽  
Microstructure And Mechanical Properties

Bacterial cellulose is a naturally occurring polysaccharide with numerous biomedical applications that range from drug delivery platforms to tissue engineering strategies. BC possesses remarkable biocompatibility, microstructure, and mechanical properties that resemble native human tissues, making it suitable for the replacement of damaged or injured tissues. In this review, we will discuss the structure and mechanical properties of the BC and summarize the techniques used to characterize these properties. We will also discuss the functionalization of BC to yield nanocomposites and the surface modification of BC by plasma and irradiation-based methods to fabricate materials with improved functionalities such as bactericidal capabilities.

Sign in / Sign up

Export Citation Format

Share Document