scholarly journals Curvature of A Cantilever Beam Subjected to An Equi-Biaxial Bending Moment

1998 ◽  
Vol 518 ◽  
Author(s):  
P. Krulevitch ◽  
G.C. Johnson
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Cantilever Beam ◽  
Bending Moment ◽  
Biaxial Bending ◽  
Element Analysis

AbstractResults from a finite element analysis of a cantilever beam subjected to an equi-biaxial bending moment demonstrate that the biaxial modulus E/(1-v) must be used even for narrow beams.

Double Cantilever Beam Measurement and Finite Element Analysis of Cryogenic Mode I Interlaminar Fracture Toughness of Glass-Cloth/Epoxy Laminates

2000 ◽  
Vol 123 (2) ◽  
pp. 191-197 ◽  
Author(s):  
Y. Shindo ◽  
K. Horiguchi ◽  
R. Wang ◽  
H. Kudo
Keyword(s):  
Fracture Toughness ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Cantilever Beam ◽  
Double Cantilever Beam ◽  
Mode I ◽  
Interlaminar Fracture Toughness ◽  
Element Analysis ◽  
Interlaminar Fracture ◽  
Delamination Crack

An experimental and analytical investigation in cryogenic Mode I interlaminar fracture behavior and toughness of SL-E woven glass-epoxy laminates was conducted. Double cantilever beam (DCB) tests were performed at room temperature (R.T.), liquid nitrogen temperature (77 K), and liquid helium temperature (4 K) to evaluate the effect of temperature and geometrical variations on the interlaminar fracture toughness. The fracture surfaces were examined by scanning electron microscopy to verify the fracture mechanisms. A finite element model was used to perform the delamination crack analysis. Critical load levels and the geometric and material properties of the test specimens were input data for the analysis which evaluated the Mode I energy release rate at the onset of delamination crack propagation. The results of the finite element analysis are utilized to supplement the experimental data.

scholarly journals A Review on Numerical Analysis of RC Flat Slabs Exposed to Fire

2020 ◽  
Vol 27 (1) ◽  
pp. 1-5
Author(s):  
Hanadi Naji ◽  
Nibras Khalid ◽  
Mutaz Medhlom
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Numerical Analysis ◽  
Bending Moment ◽  
Mechanical And Thermal Properties ◽  
Vertical Deflection ◽  
Element Analysis ◽  
Flat Slabs ◽  
Numerical Studies ◽  
The Finite Element Analysis

This paper aims at presenting and discussing the numerical studies performed to estimate the mechanical and thermal behavior of RC flat slabs at elevated temperature and fire. The numerical analysis is carried out using finite element programs by developing models to simulate the performance of the buildings subjected to fire. The mechanical and thermal properties of the materials obtained from the experimental work are involved in the modeling that the outcomes will be more realistic. Many parameters related to fire resistance of the flat slabs have been studied and the finite element analysis results reveal that the width and thickness of the slab, the temperature gradient, the fire direction, the exposure duration and the thermal restraint are important factors that influence the vertical deflection, bending moment and force membrane of the flat slabs exposed to fire. However, the validation of the models is verified by comparing their results to the available experimental date. The finite element modeling contributes in saving cost and time consumed by experiments.

Dynamic Interaction of High-Voltage Power Transformer Bushings, Turrets, and Tanks

2018 ◽  
Vol 34 (1) ◽  
pp. 397-421 ◽  
Author(s):  
Guo-Liang Ma ◽  
Qiang Xie ◽  
Andrew Whittaker
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Voltage ◽  
Power Transformer ◽  
Bending Moment ◽  
Dynamic Interaction ◽  
Electrical Performance ◽  
Element Analysis ◽  
Ground Shaking ◽  
Input Motion

High-voltage (HV) bushings are attached to a power transformer tank either directly or indirectly via turrets. Turrets are used to achieve electrical performance requirements, but their potential impact on the seismic performance of the supported bushings has not been considered. Earthquake simulator testing and finite-element analysis were used to quantify the amplification of ground shaking through tanks (220- and 500-kV) and turrets to the points of attachment of roof- and sidewall-supported bushings. Substantial amplification of motion was seen in both physical experiments and numerical simulations. Sample bracing schemes external to the transformer tank were investigated to potentially reduce the motions experienced by the bushings. Bushing tip displacements were reduced in all stiffening cases studied, but the outcomes for bending moment at the bushing-turret connection were mixed, with no change in some cases and significant reductions in others. The physical and numerical studies described in this paper make clear the importance of dynamic interaction of bushings, turrets, and the power transformer tank. The methods currently used to address the amplification of input motion from the base of a tank to the points of attachment of its bushing are inadequate. The seismic design of HV power transformer tanks and turrets should be supported by finite-element analysis of validated models to avoid dynamic interaction in the bushing-turret-tank system, to minimize seismic demand on the transformer bushings, and to minimize the risk of substation damage in earthquakes.

Capacity Analysis of PE Pipeline With Non-Planar Defect

2013 ◽  
Author(s):  
Weijie Jiang ◽  
Jianping Zhao ◽  
Dingyue Chen
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Constitutive Model ◽  
Mechanical Performance ◽  
Orthogonal Design ◽  
Bending Moment ◽  
Limit Load ◽  
Capacity Analysis ◽  
Element Analysis ◽  
Load Factors

A tensile test of buried PE pipe is designed to test the mechanical performance. Then the constitutive model for the PE pipe can be established. The limit load of the PE pipe with local thinning defect can be studied with the method of combining the orthogonal design of experiment and finite element analysis. Then the factors of local thinning defect pipe limit load factors can be analyzed. The results show that the depth of the defect has a great effect on the limit load (internal pressure and bending moment) of PE pipe. The effects that the axial length of the defect and the circumferential length of the defect have on the limit load are not significant.

Finite Element Stress Analysis for Leak Tests of Pipe Flange Connections Subject to Internal Pressure and Bending Moment

2011 ◽  
Author(s):  
Satoshi Nagata ◽  
Toshiyuki Sawa ◽  
Takashi Kobayashi ◽  
Hirokazu Tsuji
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Internal Pressure ◽  
Bending Moment ◽  
Strain Gages ◽  
Element Analysis ◽  
Element Simulation ◽  
Sealing Performance ◽  
Gas Leak ◽  
Helium Gas

This paper reports the results of finite element analysis representing the sealing performance tests on the slip-on type pipe flange connections for 8 inch and 16 inch. The flange connections are subjected to internal pressure and bending moment. Internal pressure is applied by helium gas and the bending moment is loaded through 4 points bending equipment. Gas leak rates are measured by pressure decay method. During the test, the variations in the axial bolt force are monitored for all the bolts by strain gages. The pipe stress at the junction of pipe and flange is also measured. Finite element analysis simulates the tests and the simulated results are compared with the measured data. Then the behaviors of the slip-on type flange connections under internal pressure and bending moment as well as the sealing performance are clarified by the experiment and the finite element simulation.

An Improved Joint Model and Equations for Flexibility of Tubular Joints

1990 ◽  
Vol 112 (2) ◽  
pp. 157-168 ◽  
Author(s):  
Y. Ueda ◽  
S. M. H. Rashed ◽  
K. Nakacho
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Bending Moment ◽  
Joint Model ◽  
Initial Stiffness ◽  
Element Analysis ◽  
Joint Flexibility ◽  
Elastic Plastic ◽  
Tubular Joints ◽  
Different Types

In tubular frames with simple joints, joints may show considerable flexibility in the elastic as well as the elastic-plastic ranges. Such flexibility may have large effects on the behavior of the structure as a whole. In a previous paper, an effective simple model of tubular joints is developed. The model takes account of joint flexibility in the elastic as well as the elastic-plastic ranges based on elastic-fully plastic load-displacement relatioships. In this paper an improved joint model is presented to provide better accuracy while maintaining simplicity. The accuracy of the model is confirmed through comparisons with results of finite element analysis. Equations to evaluate the initial stiffness of tubular T and Y-joints when braces are subjected to axial compression or in-plane bending moment are also presented. Such equations for different types of joints in different loading conditions are needed in order to avoid expensive calculations to evaluate the initial stiffness of joints.

Finite Element Analysis of the Influence of Balance Mode on Rolling Mill Universal Spindle Strength

2014 ◽  
Vol 548-549 ◽  
pp. 449-453 ◽  
Author(s):  
Zhi Qiang Guo ◽  
Ze Lu Xu
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Mechanical Model ◽  
Rolling Mill ◽  
Loading Condition ◽  
Equivalent Stress ◽  
Bending Moment ◽  
Element Model ◽  
Element Analysis ◽  
Universal Spindle

For the problem of balance bearing of universal spindle in rolling mill being prone to damage, the paper established mechanical model and finite element model of universal spindle. The paper has analyzed that the shear and bending moment in the middle of the shaft is the largest. The fillet near shoulder of balance bearing of the spindle is dangerous part. In order to reduce principal stress of universal spindle caused by moment, the paper improved balance mode of the spindle. The equilibrant was applied from in one place of shaft to put in two places. After optimizing, equivalent stress of the spindle is slight smaller than before under the same loading condition, which illustrates that the strength of the spindle is appropriately improved. Although the effect is not obvious, this has played a guiding role for the optimization of balance mode of universal spindle.

Sign in / Sign up

Export Citation Format

Share Document