scholarly journals Aluminum and Electron-Irradiation Induced Deep-Levels In N-Type And P-Type 6H-Sic

1998 ◽  
Vol 510 ◽  
Author(s):  
Min Gong ◽  
C. D. Beling ◽  
S. Fung ◽  
G. Brauer ◽  
H. Wirth ◽  
...  
Keyword(s):  
Electron Irradiation ◽  
Deep Level Transient Spectroscopy ◽  
Deep Level ◽  
Heavy Ion ◽  
Deep Levels ◽  
Hole Trap ◽  
Electron Traps ◽  
Transient Spectroscopy ◽  
P Type ◽  
Dlts Spectra

AbstractTwo deep levels, located at Ev+0.26eV and Ec-0.44eV, in Al-implanted n-type samples and one at Ev+0.48eV in p-type samples have been observed by the deep level transient spectroscopy. The level of is identified as the shallower aluminum-acceptor. The 1.7 MeV electron-irradiation, used as a probe to distinguish the implantation induced deep-levels, induces at least six electron traps in the n-SiC and one hole-trap in the p-type material. The peak positions of these deep-levels in DLTS spectra are quite different from those induced by Al-implantation. This result suggests that various damages are formed after heavy ion (Al) and light particle (e) irradiation.

Deep Levels in P-Type 4H-SiC Induced by Low-Energy Electron Irradiation

2013 ◽  
Vol 740-742 ◽  
pp. 373-376 ◽  
Author(s):  
Kazuki Yoshihara ◽  
Masashi Kato ◽  
Masaya Ichimura ◽  
Tomoaki Hatayama ◽  
Takeshi Ohshima
Keyword(s):  
Electron Irradiation ◽  
Deep Level Transient Spectroscopy ◽  
Deep Level ◽  
Deep Levels ◽  
Low Energy ◽  
Epitaxial Layers ◽  
Before And After ◽  
Low Energy Electron ◽  
Transient Spectroscopy ◽  
P Type

We have characterized deep levels in as-grown and electron irradiated p-type 4H-SiC epitaxial layers by the current deep-level transient spectroscopy (I-DLTS) method. A part of the samples were irradiated with electrons in order to introduce defects. As a result, we found that electron irradiation to p-type 4H-SiC created complex defects including carbon vacancy or interstitial. Moreover, we found that observed deep levels are different between before and after annealing, and thus annealing may change structures of defects.

Influence of Substrate Annealing Temperature upon Deep Levels in n-Type 4H SiC

2001 ◽  
Vol 699 ◽  
Author(s):  
Martin E. Kordesch ◽  
Florentina Perjeru ◽  
R. L. Woodin
Keyword(s):  
Deep Level Transient Spectroscopy ◽  
Annealing Temperature ◽  
Deep Level ◽  
Deep Levels ◽  
Schottky Barriers ◽  
Hole Trap ◽  
Electron Traps ◽  
Transient Spectroscopy ◽  
Influence Of Substrate ◽  
Substrate Annealing

AbstractThe evolution of deep levels that depend upon annealing temperature is investigated for n-type 4H SiC-Ni Schottky barriers. Several samples, cut from the same wafer, have been left unheated or annealed at 400°C, 700°C and 900°C, in air. Deep level transient spectroscopy (DLTS) has been used to investigate deep levels in all four sets of samples. Electron traps with activation energies EC-ET = 0.19 to 0.5 eV are observed, as well as a hole trap in the sample annealed at 900°C at energy ET-EV = 0.14 eV.

Deep Levels Generated by Ion-Implantation in n- and p-Type 4H-SiC

2009 ◽  
Vol 615-617 ◽  
pp. 365-368 ◽  
Author(s):  
Koutarou Kawahara ◽  
Giovanni Alfieri ◽  
Tsunenobu Kimoto
Keyword(s):  
High Temperature ◽  
Deep Level Transient Spectroscopy ◽  
Deep Level ◽  
Deep Levels ◽  
High Temperature Annealing ◽  
Implantation Damage ◽  
Transient Spectroscopy ◽  
P Type ◽  
Two Peaks ◽  
Dlts Spectra

The authors have investigated deep levels in the whole energy range of bandgap of 4H-SiC, which are generated by N+, P+, Al+ implantation, by deep level transient spectroscopy (DLTS). Ne+-implanted samples have been also prepared to investigate the pure implantation damage. In the n-type as-grown material, Z1/2 (Ec – 0.63 eV) and EH6/7 (Ec – 1.6 eV) are dominant deep levels. When the implant dose is low, seven peaks (IN1, IN3 ~ IN6, IN8, IN9) have emerged by implantation and annealing at 1000oC in the DLTS spectra from all n-type samples. After high-temperature annealing at 1700oC, however, most DLTS peaks disappeared, and two peaks, Z1/2 and EH6/7 survive. In the p-type as-grown material, D center (Ev + 0.40 eV) and HK4 (Ev + 1.4 eV) are dominant. When the implant dose is low, two peaks (IP1, IP3) have emerged by implantation and annealing at 1000oC, and four traps IP2, IP4 (Ev + 0.72 eV), IP7 (Ev + 1.3 eV), and IP8 (Ev + 1.4 eV) are dominant after annealing at 1700oC.

Deep Levels in Electron-Irradiated n- and p-type 4H-SiC Investigated by Deep Level Transient Spectroscopy

2007 ◽  
Vol 556-557 ◽  
pp. 331-334 ◽  
Author(s):  
Katsunori Danno ◽  
Tsunenobu Kimoto
Keyword(s):  
Charge State ◽  
Electron Irradiation ◽  
Deep Level Transient Spectroscopy ◽  
Deep Level ◽  
Deep Levels ◽  
Low Energy ◽  
Annealing Stage ◽  
Low Energy Electron ◽  
Transient Spectroscopy ◽  
P Type

The authors have investigated deep levels in electron-irradiated n- and p-type 4H-SiC epilayers by deep level transient spectroscopy (DLTS). By low-energy electron irradiation at 116 keV, the Z1/2 and EH6/7 concentrations are increased in n-type samples, and the concentrations are almost unchanged after annealing at 950°C for 30 min. In p-type samples, the unknown centers, namely EP1 and EP2, are introduced by irradiation. By annealing at 950°C, the unknown centers are annealed out. The HK4 center (EV + 1.44 eV) is increased by the electron irradiation and subsequent annealing at 950°C. The dependence of increase in the trap concentrations by irradiation (NT) on the electron fluence reveals that NT for the Z1/2 and EH6/7 centers is in proportional to the 0.7 power of electron fluence, while the slope of the plot is 0.5 for the HK4 center. The Z1/2 and EH6/7 centers show similar annealing stage and are thermally stable up to 1500-1600°C, while the HK4 center is annealed out at about 1350°C. The Z1/2 and EH6/7 centers may be derived from a same origin (single carbon vacancy: VC) but different charge state. The HK4 center may be a complex including VC.

Reactive-Ion-Etching Induced Deep Levels Observed in n-Type and p-Type 4H-SiC

2010 ◽  
Vol 645-648 ◽  
pp. 759-762
Author(s):  
Koutarou Kawahara ◽  
Giovanni Alfieri ◽  
Michael Krieger ◽  
Tsunenobu Kimoto
Keyword(s):  
Deep Level Transient Spectroscopy ◽  
Deep Level ◽  
Reactive Ion Etching ◽  
Deep Levels ◽  
Total Density ◽  
Ion Etching ◽  
Initial Concentration ◽  
Grown Sample ◽  
Transient Spectroscopy ◽  
P Type

In this study, deep levels are investigated, which are introduced by reactive ion etching (RIE) of n-type/p-type 4H-SiC. The capacitance of as-etched p-type SiC is remarkably small due to compensation or deactivation of acceptors. These acceptors can be recovered to the initial concentration of the as-grown sample after annealing at 1000oC. However, various kinds of defects remain at a total density of ~5× 1014 cm-3 in a surface-near region from 0.3 μm to 1.0 μm even after annealing at 1000oC. The following defects are detected by Deep Level Transient Spectroscopy (DLTS): IN2 (EC – 0.35 eV), EN (EC – 1.6 eV), IP1 (EV + 0.35 eV), IP2 (HS1: EV + 0.39 eV), IP4 (HK0: EV + 0.72 eV), IP5 (EV + 0.75 eV), IP7 (EV + 1.3 eV), and EP (EV + 1.4 eV). These defects generated by RIE can be significantly reduced by thermal oxidation and subsequent annealing at 1400oC.

Characterisation of the Subthreshold Damage in MeV Ion Implanted p Si

1998 ◽  
Vol 510 ◽  
Author(s):  
Shabih Fatima ◽  
Jennifer Wong-Leung ◽  
John Fitz Gerald ◽  
C. Jagadish
Keyword(s):  
Point Defects ◽  
Deep Level Transient Spectroscopy ◽  
Damage Evolution ◽  
Peak Concentration ◽  
Deep Level ◽  
Extended Defects ◽  
Transmission Electron ◽  
Transient Spectroscopy ◽  
P Type ◽  
Dlts Spectra

AbstractSubthreshold damage in p-type Si implanted and annealed at elevated temperature is characterized using deep level transient spectroscopy (DLTS) and transmission electron microscopy (TEM). P-type Si is implanted with Si, Ge and Sn with energies in the range of 4 to 8.5 MeV, doses from 7 × 1012to 1×1014cm−2and all annealed at 800°C for 15 min. For each implanted specie, DLTS spectra show a transition dose called threshold dose above which point defects transform in to extended defects. DLTS measurements have shown for the doses below threshold, a sharp peak, corresponding to the signature of point defects and for doses above threshold a broad peak indicating the presence of extended defects. This is found to be consistent with TEM analyses where no defects are seen for the doses below threshold and the presence of extended defects for the doses above threshold. This suggests a defect transformation regime where point defects present below threshold are acting like nucleating sites for the extended defects. Also the mass dependence on the damage evolution has been observed, where rod-like defects are observed in the case of Si and (rod-like defects and loops) for Ge and Sn despite the fact that peak concentration of vacancies for Ge and Sn are normalized to the peak number of vacancies for Si.

Deep Levels in As-Grown and Electron-Irradiated P-type 4H-SiC

2006 ◽  
Vol 911 ◽  
Author(s):  
Katsunori Danno ◽  
Tsunenobu Kimoto
Keyword(s):  
Cross Section ◽  
Deep Level Transient Spectroscopy ◽  
Capture Cross Section ◽  
Arrhenius Plot ◽  
Deep Level ◽  
Deep Levels ◽  
Emission Time ◽  
Transient Spectroscopy ◽  
P Type ◽  
Thermal Stability Of

AbstractDeep levels in as-grown and electron-irradiated p-type 4H-SiC have been investigated by deep level transient spectroscopy (DLTS). Three hole traps, namely HK2, HK3, and HK4, could be detected in the temperature range from 350K to 700K. Activation energies of the hole traps were estimated to be 0.84 eV for HK2, 1.27 eV for HK3, and 1.44 eV for HK4 from the Arrhenius plot of emission-time constants assuming temperature-independent capture cross section. By double-correlated DLTS (DDLTS), they were revealed to be donor-like (+/0) traps. The concentrations of HK3 and HK4 centers were clearly increased by low-energy (116 keV) electron irradiation. Based on thermal stability of the HK3 and HK4 centers up to 1350°C and the dependence of HK4 concentration on the electron fluence, they may originate from a complex including defect(s) caused by carbon displacement.

Sign in / Sign up

Export Citation Format

Share Document