Modeling of strain distribution in non-hydrostatically pressed nanocrystalline sic; in-situ x-ray diffraction study

1997 ◽  
Vol 501 ◽  
Author(s):  
R. Pielaszek ◽  
S. Stel'Makh ◽  
M. Aloshina ◽  
S. Gierlotka ◽  
B. Palosz
Keyword(s):  
Grain Size ◽  
Ab Initio ◽  
Strain Distribution ◽  
Distribution Functions ◽  
Scattered Intensity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Diffraction Patterns ◽  
Different Grain Size

ABSTRACTGrain size and strain distribution functions of polycrystals of SiC with nanosize grains were examined based on X-ray diffraction data and ab initio calculations of scattered intensity from Debye functions. A tentative model of distribution of strain induced under high isostatic pressure in nanoparticles with different grain size is presented. Nanocrystalline SiC powders with grains down to 80Å in diameter were examined. In situ high pressure diffraction experiments were performed in cubic anvil cell MAX80 (up to 6 GPa) and in Diamond Anvil Cell (DAC) (up to 45 GPa) at HASYLAB, Hamburg, Germany. Shape of the Bragg lines was analysed with the use of two methods: (i) calculation of theoretical diffraction patterns based on modeling of one-dimensional disordering and ab initio calculation of scattered intensity starting from Debye functions and, (ii) approximation of the experimental shape of Bragg reflections by a combination of two functions: Gaussian (G) and Lorentzian (L).

Mechanical Spectroscopy Investigation of Liquid Pb-Bi Alloys

2012 ◽  
Vol 184 ◽  
pp. 434-439 ◽  
Author(s):  
Roberto Montanari ◽  
Alessandra Varone
Keyword(s):  
Distribution Functions ◽  
X Ray Diffraction ◽  
Mechanical Spectroscopy ◽  
X Ray ◽  
Neutron Spallation Source ◽  
Driven System ◽  
Spallation Source ◽  
Accelerator Driven System ◽  
The Mean ◽  
Diffraction Patterns

Liquid Pb–Bi eutectic alloy has been selected as coolant and neutron spallation source for the development of MYRRHA, an accelerator driven system. The alloy has been characterized in liquid state from melting (125 °C) to 650 °C by mechanical spectroscopy. Experiments have been carried out using hollow reeds of austenitic stainless steel filled with the Pb-Bi alloy and sealed at the extremities. From 350 °C to 520 °C modulus shows a remarkable drop accompanied by a broad internal friction maximum. In the same temperature range radial distribution functions, determined from X-ray diffraction patterns, evidenced variations of the mean distance between the 1st nearest neighbour atoms. The anelastic phenomena have been attributed to a structural re-arrangement of liquid metal. For comparison, other alloys of the Pb-Bi system with hypo-eutectic composition have been investigated.

The Effect of Ethanol Solvent on Characterization of MAPbI3 Perovskite

2021 ◽  
Vol 1039 ◽  
pp. 307-312
Author(s):  
Mohammad Malik Abood ◽  
Osama Abdul Azeez Dakhil ◽  
Aref Saleh Baron
Keyword(s):  
Grain Size ◽  
Optical Properties ◽  
Morphological Characteristics ◽  
X Ray Diffraction ◽  
Lead Iodide ◽  
X Ray ◽  
Diffraction Patterns ◽  
Photovoltaic Technologies ◽  
Perovskite Photovoltaic

Methyl ammonium lead iodide CH3NH3PbI3 Perovskite was synthesized by a new method mixing between one and two steps, in addition, the ethanol solvent was used to dissolve CH3NH3I and compared with isopropanol solvent. The characterizations of synthesized perovskite samples included the structural properties, morphological characteristics and optical properties. The intensity and orientation in X-ray diffraction patterns appear clearly in ethanol solvent while disappearing at a peak at 12o due to the speed reaction of perovskite in this solvent. Additionally, the ethanol solvent increasing the grain size of perovskite which homogeneity of the surface morphology. the ethanol solvent cause a decrease in the wavelength of absorbance edge in addition to an increase in the energy bandgap value. Keywords: Ethanol Solvent, Perovskite, Photovoltaic Technologies, X-ray diffraction.

High-pressure study of a nanostructured SnSe1−xSx (x = 0.5) solid solution by in-situ X-ray diffraction and ab-initio calculations

2019 ◽  
Vol 792 ◽  
pp. 536-542
Author(s):  
Larissa da Silva Marques ◽  
Joelma Maria de Oliveira Ferreira ◽  
Querem Hapuque Félix Rebelo ◽  
Angsula Ghosh ◽  
Daniela Menegon Trichês ◽  
...  
Keyword(s):  
Solid Solution ◽  
High Pressure ◽  
Ab Initio Calculations ◽  
Ab Initio ◽  
X Ray Diffraction ◽  
X Ray ◽  
High Pressure Study

In situ coupling of atomic force microscopy and sub-micrometer focused X-ray techniques

2014 ◽  
Vol 1712 ◽  
Author(s):  
Thomas W. Cornelius ◽  
Zhe Ren ◽  
Francesca Mastropietro ◽  
Simon Langlais ◽  
Anton Davydok ◽  
...  
Keyword(s):  
Mechanical Response ◽  
Elemental Distribution ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cu Nanowires ◽  
Force Microscopy ◽  
Indentation Tests ◽  
Scanning Force ◽  
Diffraction Patterns

ABSTRACTA scanning force microscope for in situ nanofocused X-ray studies (SFINX) has been developed which can be installed on diffractometers at synchrotron beamlines allowing for the combination with various techniques such as coherent X-ray diffraction and fluorescence. The capabilities of this device are demonstrated on Cu nanowires and on Au islands grown on sapphire (0001). The sample topography, crystallinity, and elemental distribution of the same area are investigated by recording simultaneously an AFM image, a scanning X-ray diffraction map, and a fluorescence map. Additionally, the mechanical response of Au islands is studied by in situ indentation tests employing the AFM-tip and recording 2D X-ray diffraction patterns during mechanical loading.

Development of an in situ synchrotron X-ray total scattering setup under pressurized hydrogen gas

2018 ◽  
Vol 51 (3) ◽  
pp. 796-801 ◽  
Author(s):  
Kouji Sakaki ◽  
Hyunjeong Kim ◽  
Akihiko Machida ◽  
Tetsu Watanuki ◽  
Yoshinori Katayama ◽  
...  
Keyword(s):  
Pair Distribution Function ◽  
Hydrogen Gas ◽  
Ex Situ ◽  
Sample Holder ◽  
Hydrogen Storage Materials ◽  
X Ray Diffraction ◽  
Total Scattering ◽  
X Ray ◽  
Diffraction Patterns

This article describes the development of an in situ gas-loading sample holder for synchrotron X-ray total scattering experiments, particularly for hydrogen storage materials, designed to collect diffraction and pair distribution function (PDF) data under pressurized hydrogen gas. A polyimide capillary with a diameter and thickness of 1.4 and 0.06 mm, respectively, connected with commercially available Swagelok fittings was used as an in situ sample holder. Leakage tests confirmed that this sample holder allows 3 MPa of hydrogen gas pressure and 393 K to be achieved without leakage. Using the developed in situ sample holder, significant background and Bragg peaks from the sample holder were not observed in the X-ray diffraction patterns and their signal-to-noise ratios were sufficiently good. The PDF patterns showed sharp peaks in the r range up to 100 Å. The results of Rietveld and PDF refinements of Ni are consistent with those obtained using a polyimide capillary (1.0 mm diameter and 0.04 mm thickness) that has been used for ex situ experiments. In addition, in situ synchrotron X-ray total scattering experiments under pressurized hydrogen gas up to 1 MPa were successfully demonstrated for LaNi4.6Cu.

scholarly journals A Flow-Through Reaction Cell for Studying Minerals Leaching by In-Situ Synchrotron Powder X-ray Diffraction

Minerals ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 990
Author(s):  
Fatemeh Nikkhou ◽  
Fang Xia ◽  
Xizhi Yao ◽  
Idowu A. Adegoke ◽  
Qinfen Gu ◽  
...  
Keyword(s):  
Flow Rate ◽  
Pressure Leaching ◽  
X Ray Diffraction ◽  
Reaction Cell ◽  
Time Resolved ◽  
X Ray ◽  
Ore Minerals ◽  
Flow Through ◽  
Diffraction Patterns

A flow-through reaction cell has been developed for studying minerals leaching by in-situ time-resolved powder X-ray diffraction, allowing for a better understanding of the leaching mechanisms and kinetics. The cell has the capability of independent control of temperature (up to 95 °C) and flow rate (>0.5 mL min−1) for atmospheric pressure leaching. It was successfully tested at the powder diffraction beamline at the Australian Synchrotron. Galena powder was leached in a citrate solution under flow-through condition at a flow rate of 0.5 mL min−1, while diffraction patterns were collected during the entire leaching process, showing rapid galena dissolution without the formation of secondary mineral phases. The flow-through cell can be used to study leaching processes of other ore minerals.

scholarly journals In-situhigh-pressure powder X-ray diffraction study of α-zirconium phosphate

2014 ◽  
Vol 70 (3) ◽  
pp. 510-516
Author(s):  
Jennifer E. Readman ◽  
Alistair Lennie ◽  
Joseph A. Hriljac
Keyword(s):  
High Pressure ◽  
Synchrotron Radiation ◽  
Zirconium Phosphate ◽  
Water Molecules ◽  
X Ray Diffraction ◽  
X Ray ◽  
Additional Water ◽  
Diffraction Patterns ◽  
Layered Phosphate

The high-pressure structural chemistry of α-zirconium phosphate, α-Zr(HPO4)2·H2O, was studied usingin-situhigh-pressure diffraction and synchrotron radiation. The layered phosphate was studied under both hydrostatic and non-hydrostatic conditions and Rietveld refinement carried out on the resulting diffraction patterns. It was found that under hydrostatic conditions no uptake of additional water molecules from the pressure-transmitting medium occurred, contrary to what had previously been observed with some zeolite materials and a layered titanium phosphate. Under hydrostatic conditions the sample remained crystalline up to 10 GPa, but under non-hydrostatic conditions the sample amorphized between 7.3 and 9.5 GPa. The calculated bulk modulus,K0= 15.2 GPa, showed the material to be very compressible with the weak linkages in the structure of the type Zr—O—P.

In Situ Synchrotron X-ray Diffraction Measurement of the Strain Distribution in Si Die for the Embedded Substrates

2015 ◽  
Vol 44 (10) ◽  
pp. 3942-3947
Author(s):  
Hsueh Hsien Hsu ◽  
Hao Chen ◽  
Yao Tsung Ouyang ◽  
Tz Cheng Chiu ◽  
Tao Chih Chang ◽  
...  
Keyword(s):  
Strain Distribution ◽  
Diffraction Measurement ◽  
X Ray Diffraction ◽  
X Ray
Sign in / Sign up

Export Citation Format

Share Document