Dispersion and Lorentz Microscopy of Samarium Cobalt Nanoparticles in a Polymer Matrix

1997 ◽  
Vol 501 ◽  
Author(s):  
Yan Jin ◽  
Sara A. Majetich ◽  
Anit Giri
Keyword(s):  
Polymer Matrix ◽  
Magnetic Measurements ◽  
Exchange Interactions ◽  
Squid Magnetometry ◽  
Spherical Nanoparticles ◽  
Single Particles ◽  
Interacting Particles ◽  
Magnetic Composites ◽  
Lorentz Microscopy ◽  
Transmission Electron

A new method for dispersing magnetic nanoparticles in a polymer matrix is described. SmCo5 nanoparticle powders are first prepared by ball milling, and then embedded in thermoplastic powder by further milling. The nanoparticle-embedded thermoplastic powder was compacted to form solid magnetic composites which were characterized by transmission electron microscopy (TEM) and by SQUID magnetometry. The conventional TEM measurements on microtomed sections of the composites showed spherical nanoparticles clearly separated from their nearest neighbors, thereby eliminating exchange interactions and greatly reducing magnetostatic interactions. Lorentz microscopy illustrated the potential for imaging single particles and determining the magnetization directions of isolated and interacting particles. Magnetic measurements on dilute samples show that the processing method does not degrade the magnetic properties of the particles.

scholarly journals Magnetic Behaviour of Mn12-Stearate Single-Molecule Magnets Immobilized on the Surface of 300 nm Spherical Silica Nanoparticles

Materials ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2624 ◽  
Author(s):  
Magdalena Laskowska ◽  
Oleksandr Pastukh ◽  
Piotr Konieczny ◽  
Mateusz Dulski ◽  
Marcin Zalsiński ◽  
...  
Keyword(s):  
Silica Nanoparticles ◽  
Single Molecule ◽  
Silica Surface ◽  
Magnetic Measurements ◽  
Magnetic Behaviour ◽  
Silica Spheres ◽  
Squid Magnetometry ◽  
Single Molecule Magnets ◽  
Transmission Electron ◽  
Spherical Silica

The magnetic behaviour of Mn 12 -stearate single-molecule magnets (SMMs) ([ Mn 12 O 12 ( CH 3 ( CH 2 ) 16 CO 2 ) 16 ] · 2 CH 3 COOH · 4 H 2 O ) on the surface of 300 nm spherical silica nanoparticles were investigated. The SMMs were bonded at the silica surface with the assumed number of anchoring points, which influenced on their degree of freedom and distribution. In order to check the properties of Mn 12 -stearate molecules separated on the silica surface, and check their interactions, the samples containing four different concentration of spacers per single anchoring unit and variously bonded Mn 12 -stearate particles were prepared. The materials have been examined using Raman spectroscopy, transmission electron microscopy, and SQUID magnetometry. The results of magnetic measurements showed a correlation between the way of single-molecule magnets immobilization onto the silica spheres and the magnetic properties of the obtained hybrid materials.

Magnetic Material Observation Assembly for Tem with a Eucentric Goniometer

1976 ◽  
Vol 34 ◽  
pp. 540-541
Author(s):  
K. Shi rota ◽  
A. Yonezawa ◽  
K. Shibatomi ◽  
T. Yanaka
Keyword(s):  
Magnetic Material ◽  
Electron Microscope ◽  
Magnetic Domain ◽  
Objective Lens ◽  
Magnetic Domains ◽  
Lorentz Microscopy ◽  
Transmission Electron ◽  
Correction Of Astigmatism ◽  
Single Orientation ◽  
Conventional Transmission Electron Microscope

As is well known, it is not so easy to operate a conventional transmission electron microscope for observation of magnetic materials. The reason is that the instrument requires re-alignment of the axis and re-correction of astigmatism after each specimen shift, as the lens field is greatly disturbed by the specimen. With a conventional electron microscope, furthermore, it is impossible to observe magnetic domains, because the specimen is magnetized to single orientation by the lens field. The above mentioned facts are due to the specimen usually being in the lens field. Thus, special techniques or systems are usually required for magnetic material observation (especially magnetic domain observation), for example, the technique to switch off the objective lens current and Lorentz microscopy. But these cannot give high image quality and wide magnification range, and furthermore Lorentz microscopy is very complicated.

Nanocomposite synthesis by thermolysis of [Ag(hfac)(COD)] in amorphous polystyrene

2012 ◽  
Vol 19 (2) ◽  
pp. 195-197 ◽  
Author(s):  
Gianfranco Carotenuto ◽  
Mariano Palomba ◽  
Luigi Nicolais
Keyword(s):  
Polymer Matrix ◽  
Nanocomposite Films ◽  
Numerical Density ◽  
Silver Particles ◽  
X Ray ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Yellow Coloration ◽  
Color Filters ◽  
Silver Atoms

AbstractLightfast color filters (intensively and brightly colored) can be easily produced by dying optical plastics with the surface plasmon resonance (SPR) of metal nanoparticles such as silver and gold. Here, color filters based on silver nanoparticles embedded in amorphous polystyrene have been prepared by dissolving and thermally decomposing (1,5-cyclooctadiene)(hexafluoro-acetylacetonate)silver(I) in amorphous polystyrene. The metal precursor quickly decomposes (10 s, at 180°C), leading to silver atoms that clusterize and produce a non-aggregated dispersion of silver particles in the polymer matrix. The intensity of the yellow coloration due to the SPR of nanoscopic silver can be widely tuned simply by varying the cluster numerical density in the polymer matrix that depends on the silver precursor concentration. The obtained nanocomposite films have been characterized by X-ray power diffraction, transmission electron microscopy, and UV-Vis spectroscopy.

scholarly journals Development of Quantum Dot (QD) Based Color Converters for Multicolor Display

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1089
Author(s):  
Muhammad T. Sajjad ◽  
Ashu K. Bansal ◽  
Francesco Antolini ◽  
Eduard Preis ◽  
Lenuta Stroea ◽  
...  
Keyword(s):  
Polymer Matrix ◽  
Cost Effective ◽  
Final Size ◽  
Force Microscopy ◽  
Morphological Studies ◽  
Color Displays ◽  
Transmission Electron ◽  
Different Temperatures ◽  
Color Conversion ◽  
Temperature Time

Many displays involve the use of color conversion layers. QDs are attractive candidates as color converters because of their easy processability, tuneable optical properties, high photoluminescence quantum yield, and good stability. Here, we show that emissive QDs with narrow emission range can be made in-situ in a polymer matrix, with properties useful for color conversion. This was achieved by blending the blue-emitting pyridine based polymer with a cadmium selenide precursor and baking their films at different temperatures. To achieve efficient color conversion, blend ratio and baking temperature/time were varied. We found that thermal decomposition of the precursor leads to highly emissive QDs whose final size and emission can be controlled using baking temperature/time. The formation of the QDs inside the polymer matrix was confirmed through morphological studies using atomic force microscopy (AFM) and transmission electron microscopy (TEM). Hence, our approach provides a cost-effective route to making highly emissive color converters for multi-color displays.

scholarly journals The Domain and Microstructure of Resin-Bonded Magnets

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2849
Author(s):  
Marcin Jan Dośpiał
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Grain Size ◽  
Size Distribution ◽  
Domain Structure ◽  
Grain Size Distribution ◽  
Exchange Interactions ◽  
Force Microscopy ◽  
Transmission Electron ◽  
Scanning Electron

This paper presents domain and structure studies of bonded magnets made from nanocrystalline Nd-(Fe, Co)-B powder. The structure studies were investigated using scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), Mössbauer spectroscopy and X-ray diffractometry. On the basis of performed qualitative and quantitative phase composition studies, it was found that investigated alloy was mainly composed of Nd2(Fe-Co)14B hard magnetic phase (98 vol%) and a small amount of Nd1.1Fe4B4 paramagnetic phase (2 vol%). The best fit of grain size distribution was achieved for the lognormal function. The mean grain size determined from transmission electron microscopy (TEM) images on the basis of grain size distribution and diffraction pattern using the Bragg equation was about ≈130 nm. HRTEM images showed that over-stoichiometric Nd was mainly distributed on the grain boundaries as a thin amorphous border of 2 nm in width. The domain structure was investigated using a scanning electron microscope and metallographic light microscope, respectively, by Bitter and Kerr methods, and by magnetic force microscopy. Domain structure studies revealed that the observed domain structure had a labyrinth shape, which is typically observed in magnets, where strong exchange interactions between grains are present. The analysis of the domain structure in different states of magnetization revealed the dynamics of the reversal magnetization process.

scholarly journals Study Structure and Properties of Nanocomposite Material Based on Unsaturated Polyester with Clay Modified by Poly(ethylene oxide)

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
Tran Duy Thanh ◽  
Nguyen Dang Mao ◽  
Nguyen Thi Kim Ngan ◽  
Ha Thuc Chi Nhan ◽  
Ha Thuc Huy ◽  
...  
Keyword(s):  
Ethylene Oxide ◽  
Polymer Matrix ◽  
Unsaturated Polyester ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Poly Ethylene Oxide ◽  
Hydrophobic Nature ◽  
Poly Ethylene ◽  
Alkyl Ammonium

In recent years, polymer clay nanocomposites have been attracting considerable interests in polymers science because of their advantages. There are many scientists who researched about this kind of material and demonstrated that when polymer matrix was added to little weight of clay, properties were enhanced considerably. Because clay is a hydrophilic substance so it is difficult to use as filler in polymer matrix having hydrophobic nature, so clay needs to be modified to become compatible with polymer. In this study, poly(ethylene oxide) was used as a new modifier for clay to replace some traditional ionic surfactants such as primary, secondary, tertiary, and quaternary alkyl ammonium or alkylphosphonium cations having the following disadvantages: disintegrate at high temperature, catalyze polymer degradation, and make nanoproducts colorific, and so forth. In order to evaluate modifying effect of poly(ethylene oxide), modified clay products were characterize d by X-ray spectrum. Then organoclay was used to prepare nanocomposite based on unsaturated polyester. Morphology and properties of nanocomposites were measure d by X-ray diffraction, transmission electron microscopy, tensile strength, and thermal stability. The results showed that clay galleries changed to intercalated state in the nanocomposites. Properties of nanocomposites were improved a lot when the loading of the organoclay was used at 1 phr.

scholarly journals Dissimilatory Iron-Reducing Microorganisms Are Present and Active in the Sediments of the Doce River and Tributaries Impacted by Iron Mine Tailings from the Collapsed Fundão Dam (Mariana, MG, Brazil)

Minerals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 244
Author(s):  
Carolina N. Keim ◽  
Jilder D. P. Serna ◽  
Daniel Acosta-Avalos ◽  
Reiner Neumann ◽  
Alex S. Silva ◽  
...  
Keyword(s):  
Bottom Sediments ◽  
Magnetic Measurements ◽  
Culture Media ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ferric Oxyhydroxide ◽  
Transmission Electron ◽  
Iron Mine ◽  
Organic Matter Oxidation ◽  
Doce River

On 5 November 2015, a large tailing deposit failed in Brazil, releasing an estimated 32.6 to 62 million m3 of iron mining tailings into the environment. Tailings from the Fundão Dam flowed down through the Gualaxo do Norte and Carmo riverbeds and floodplains and reached the Doce River. Since then, bottom sediments have become enriched in Fe(III) oxyhydroxides. Dissimilatory iron-reducing microorganisms (DIRMs) are anaerobes able to couple organic matter oxidation to Fe(III) reduction, producing CO2 and Fe(II), which can precipitate as magnetite (FeO·Fe2O3) and other Fe(II) minerals. In this work, we investigated the presence of DIRMs in affected and non-affected bottom sediments of the Gualaxo do Norte and Doce Rivers. The increase in Fe(II) concentrations in culture media over time indicated the presence of Fe(III)-reducing microorganisms in all sediments tested, which could reduce Fe(III) from both tailings and amorphous ferric oxyhydroxide. Half of our enrichment cultures converted amorphous Fe(III) oxyhydroxide into magnetite, which was characterized by X-ray diffraction, transmission electron microscopy, and magnetic measurements. The conversion of solid Fe(III) phases to soluble Fe(II) and/or magnetite is characteristic of DIRM cultures. The presence of DIRMs in the sediments of the Doce River and tributaries points to the possibility of reductive dissolution of goethite (α-FeOOH) and/or hematite (α-Fe2O3) from sediments, along with the consumption of organics, release of trace elements, and impairment of water quality.

scholarly journals Structural Evolution in Wet Mechanically Alloyed Co-Fe-(Ta,W)-B Alloys

Metals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 800
Author(s):  
Vladimír Girman ◽  
Maksym Lisnichuk ◽  
Daria Yudina ◽  
Miloš Matvija ◽  
Pavol Sovák ◽  
...  
Keyword(s):  
Structural Changes ◽  
Magnetic Measurements ◽  
Structural Evolution ◽  
High Energy ◽  
Control Agent ◽  
X Ray Diffraction ◽  
Mechanically Alloyed ◽  
X Ray ◽  
Transmission Electron ◽  
X Ray Absorption

In the present study, the effect of wet mechanical alloying (MA) on the glass-forming ability (GFA) of Co43Fe20X5.5B31.5 (X = Ta, W) alloys was studied. The structural evolution during MA was investigated using high-energy X-ray diffraction, X-ray absorption spectroscopy, high-resolution transmission electron microscopy and magnetic measurements. Pair distribution function and extended X-ray absorption fine structure spectroscopy were used to characterize local atomic structure at various stages of MA. Besides structural changes, the magnetic properties of both compositions were investigated employing a vibrating sample magnetometer and thermomagnetic measurements. It was shown that using hexane as a process control agent during wet MA resulted in the formation of fully amorphous Co-Fe-Ta-B powder material at a shorter milling time (100 h) as compared to dry MA. It has also been shown that substituting Ta with W effectively suppresses GFA. After 100 h of MA of Co-Fe-W-B mixture, a nanocomposite material consisting of amorphous and nanocrystalline bcc-W phase was synthesized.

Influence of Alloying Additions on Enhancement of Soft Magnetic Properties Effect and Crystallization in FeXSiB (X=Cu, V, Co, Zr, Nb) Amorphous Alloys

2007 ◽  
Vol 130 ◽  
pp. 171-174 ◽  
Author(s):  
Z. Stokłosa ◽  
G. Badura ◽  
P. Kwapuliński ◽  
Józef Rasek ◽  
G. Haneczok ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Amorphous Alloys ◽  
Crystallization Process ◽  
Annealing Temperature ◽  
Magnetic Measurements ◽  
X Ray Diffraction ◽  
Soft Magnetic ◽  
X Ray ◽  
Second Stage ◽  
Transmission Electron

The crystallization and optimization of magnetic properties effects in FeXSiB (X=Cu, V, Co, Zr, Nb) amorphous alloys were studied by applying X-ray diffraction methods, high resolution transmission electron microscopy (HRTEM), resistometric and magnetic measurements. The temperatures of the first and the second stage of crystallization, the 1h optimization annealing temperature and the Curie temperature were determined for different amorphous alloys. Activation energies of crystallization process were obtained by applying the Kissinger method. The influence of alloy additions on optimization effect and crystallization processes was carefully examined.

Fabrication, characterization and magnetic properties of Na-doped ZnO nanorods

2016 ◽  
Vol 09 (03) ◽  
pp. 1650039 ◽  
Author(s):  
Jingyuan Piao ◽  
Li-Ting Tseng ◽  
Kiyonori Suzuki ◽  
Jiabao Yi
Keyword(s):  
Magnetic Measurements ◽  
Zno Nanorods ◽  
X Ray Diffraction ◽  
Paramagnetic Resonance ◽  
X Ray ◽  
Shallow Donors ◽  
Na Doping ◽  
Transmission Electron ◽  
Doped Zno ◽  
Electron Paramagnetic

Na-doped ZnO nanorods have been fabricated through a hydrothermal method. X-ray diffraction (XRD) and transmission electron microscopy (TEM) analyses indicate that the d spacing of ZnO increases with increasing doping concentration, suggesting the effective incorporation of dopant Na in the samples. Electron paramagnetic resonance (EPR) measurements indicate that there are shallow donors in pure ZnO samples and the shallow donors are strongly prohibited by Na doping. In addition, the resonance at g = 2.005 suggests the formation of Zn vacancies. Magnetic measurements indicate that pure ZnO is paramagnetic and Na doping leads to ferromagnetism at room temperature. Moreover, 0.5% Na-doped ZnO nanorods exhibits the largest saturation magnetization.

Sign in / Sign up

Export Citation Format

Share Document