High Resolution Transmission Electron Microscopy of Defect Clusters in Aluminum During Electron and Ion Irradiation at Room Temperature

1996 ◽  
Vol 439 ◽  
Author(s):  
Kazuo Furuya ◽  
Min Piao ◽  
Nobuhiro Ishikawa ◽  
Tetsuya Saito
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Room Temperature ◽  
Ion Irradiation ◽  
In Situ Observation ◽  
Dislocation Loops ◽  
Frank Loop ◽  
Planar Defects ◽  
Defect Clusters ◽  
Transmission Electron

AbstractDefect clusters in Al during electron and ion irradiation have been investigated using highresolution transmission electron microscopy (HRTEM). An ION/HVEM system which consists of a high-voltage TEM and ion implanters was used for in-situ observation of damage evolution under 1000 keV electrons and 15 keV He+ irradiation at room temperature. HRTEM of Al in [110] orientation showed many planar defects along { 111 } planes during electron irradiation, while a high density of small polyhedron-shaped cavities (He-bubbles) was observed in addition to the planar defects after He+ irradiation. Multi-slice image simulation of various models of dislocation loops indicated the planar defect as an interstitial-type Frank loop.

Annealing Of Radiation Damage in Tungsten

1970 ◽  
Vol 28 ◽  
pp. 412-413
Author(s):  
Robert C. Rau ◽  
John Moteff
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Radiation Damage ◽  
Thermal Annealing ◽  
Neutron Fluence ◽  
Dislocation Loops ◽  
Defect Clusters ◽  
Polycrystalline Tungsten ◽  
Transmission Electron ◽  
Radiation Induced

Transmission electron microscopy has been used to study the thermal annealing of radiation induced defect clusters in polycrystalline tungsten. Specimens were taken from cylindrical tensile bars which had been irradiated to a fast (E > 1 MeV) neutron fluence of 4.2 × 1019 n/cm2 at 70°C, annealed for one hour at various temperatures in argon, and tensile tested at 240°C in helium. Foils from both the unstressed button heads and the reduced areas near the fracture were examined.Figure 1 shows typical microstructures in button head foils. In the unannealed condition, Fig. 1(a), a dispersion of fine dot clusters was present. Annealing at 435°C, Fig. 1(b), produced an apparent slight decrease in cluster concentration, but annealing at 740°C, Fig. 1(C), resulted in a noticeable densification of the clusters. Finally, annealing at 900°C and 1040°C, Figs. 1(d) and (e), caused a definite decrease in cluster concentration and led to the formation of resolvable dislocation loops.

The Effect of Cryorolling on the Microstructure of Al-Cu-Mg Alloy

2016 ◽  
Vol 877 ◽  
pp. 188-193 ◽  
Author(s):  
Li Wei Quan ◽  
Wen Ning Mu ◽  
Lei Kang ◽  
Xiao Ma ◽  
Peng Han ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Tensile Strength ◽  
Yield Strength ◽  
Optical Microscopy ◽  
Room Temperature ◽  
Solution Treatment ◽  
Mg Alloy ◽  
Dislocation Loops ◽  
Transmission Electron

A precipitation hardenable Al-Cu-Mg alloy was cryorolled with liquid nitrogen followed solution treatment and then aged at 170 ̊C for different time. The microstructure was characterized by optical microscopy (OM) and transmission electron microscopy (TEM). Hardness and tensile strength were also tested. The dislocation loops in the cryorolled alloy are more than the room temperature rolled alloy. Meanwhile the hardness, yield strength and tensile strength are larger than the room temperature rolled alloy.

scholarly journals Effect of He-appm/DPA ratio on the damage microstructure of tungsten

MRS Advances ◽  
2016 ◽  
Vol 1 (42) ◽  
pp. 2893-2899 ◽  
Author(s):  
R.W. Harrison ◽  
H. Amari ◽  
G. Greaves ◽  
J.A. Hinks ◽  
S.E. Donnelly
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Ion Irradiation ◽  
Dislocation Loops ◽  
Vacancy Clusters ◽  
Transmission Electron ◽  
Damage Structure ◽  
Ordered Array ◽  
20 Nm

AbstractIn-situ ion irradiation and transmission electron microscopy has been used to examine the effects of the He appm to DPA ratio, temperature and dose on the damage structure of tungsten (W). Irradiations were performed with 15 or 60 keV He+ ions, achieving He-appm/displacements per atom (DPA) ratios of ∼40,000 and ∼2000, respectively, at temperatures between 500 and 1000°C to a dose of ∼3 DPA. A high number of small dislocation loops with sizes around 5–20 nm and a He bubble lattice were observed for both He-appm/DPA ratios at 500°C with a bubble size ∼1.5 nm. Using the g.b=0 criterion the loops were characterised as b = ±1/2<111> type. At 750°C bubbles do not form an ordered array and are larger in size compared to the irradiations at 500°C, with a diameter of ∼3 nm. Fewer dislocation loops were observed at this temperature and were also characterised to be b = ±1/2<111> type. At 1000°C, no dislocation loops were observed and bubbles grew as a function of fluence attributed to vacancy mobility being higher and vacancy clusters becoming mobile.

The Microstructure of Transiently Annealed Donor Implants in GaAs

1984 ◽  
Vol 35 ◽  
Author(s):  
M.A. Shahid ◽  
R. Bensalem ◽  
B.J. Sealy
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Electrical Activity ◽  
Room Temperature ◽  
Dislocation Loops ◽  
Electrical Measurements ◽  
Ion Energy ◽  
Transmission Electron

ABSTRACTUndoped SI (100) GaAs has been implanted with selenium and tin ions at room temperature at an ion energy of 300 keV and using ion dose in the range 1 × 1014 to 1 × 1015 ions cm−2. Transient annealing at 1000°C and above has been studied using electrical measurements and transmission electron microscopy. The results show that tin implanted samples have comparatively higher values of electrical activity and mobility than those implanted with selenium ions. A difference in the microstructure of these two implants was observed. Selenium implanted samples show dislocation lines and loops possessing 1/2<110> Burgers vectors while tin implanted GaAs contains dislocation loops of 1/2<110> and 1/3<111> types and also dislocation lines having 1/2<110> Burgers vectors. Both types of defect in tin implanted samples are decorated with precipitates.

Dissolution of Copper Precipitates in An Fe−1·3Wt%Cu Alloy Under Fe+ Ion Irradiation

1998 ◽  
Vol 540 ◽  
Author(s):  
A. C. Nicol ◽  
M. L. Jenkins ◽  
N. Wanderka ◽  
C. Abromeit
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Room Temperature ◽  
Ion Irradiation ◽  
High Resolution Electron Microscopy ◽  
Cu Alloy ◽  
Transmission Electron ◽  
Resolution Electron ◽  
The Stability

AbstractThe stability of Cu precipitates in an Fe-1.3wt%Cu alloy under 300 keV Fe+ion irradiation has been investigated using transmission electron microscopy and high-resolution electron microscopy. The irradiations were carried out between room temperature and 550°C at displacement rates of 103 to 10−2 dpa(s)−1 to fluences of up to 30 dpa. Copper precipitates were found to keep their shape but decrease in size under all irradiation conditions. The results are discussed within the framework of a competitive process between irradiation induced ballistic destruction of precipitates by cascades and irradiation-enhanced precipitation.

Xenon Ion Irradiation Effects on a Ni-Base Ni-17Mo-7Cr Alloy

2014 ◽  
Vol 94 ◽  
pp. 69-74 ◽  
Author(s):  
He Fei Huang ◽  
De Hui Li ◽  
Long Yan
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Ion Irradiation ◽  
Base Alloy ◽  
Thin Foil ◽  
Dislocation Loops ◽  
Irradiation Effects ◽  
Transmission Electron ◽  
Black Spots ◽  
Nickel Base

The irradiation effects of a new nickel-base alloy (Ni-17Mo-7Cr) has been investigated by using 1 MeV Xe20+ and 7 MeV Xe26+ ions irradiation with displacement damage range from 0.33 to 6.6 dpa. The transmission electron microscopy and nanoindentation were employed to study respectively the microstructural evolution of thin-foil specimens and nanoindentation hardness changes of bulk specimens. In case of 0.33 dpa, high number density of nano-scale black spots were observed in thin-foil specimens. High-resolution transmission electron microscopy images revealed that these black spots are some rounded solute clusters and dislocation loops. As far as the ion dose of 3.3 and 6.6 dpa, the black spots were replaced with linear-like defects which were proved to be some Ni, Mo and Cr-enrichment regions. In addition, nanoindentation results for bulk specimens showed an evident hardening phenomenon in irradiated Ni-17Mo-7Cr alloys, compared to the unirradiated specimen. The irradiation induced defects may be responsible for the hardening of Ni-17Mo-7Cr alloys.

Scanning and Transmission Electron Microscopy of Human Red Blood Cells

1969 ◽  
Vol 27 ◽  
pp. 44-45
Author(s):  
A.J. Tousimis ◽  
T.R. Padden
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Blood Cells ◽  
Room Temperature ◽  
Type Specimen ◽  
New Combination ◽  
Human Red Blood Cells ◽  
Transmission Electron ◽  
Microscope Slides ◽  
Scanning Electron

The size, shape and surface morphology of human erythrocytes (RBC) were examined by scanning electron microscopy (SEM), of the fixed material directly and by transmission electron microscopy (TEM) of surface replicas to compare the relative merits of these two observational procedures for this type specimen.A sample of human blood was fixed in glutaraldehyde and washed in distilled water by centrifugation. The washed RBC's were spread on freshly cleaved mica and on aluminum coated microscope slides and then air dried at room temperature. The SEM specimens were rotary coated with 150Å of 60:40- gold:palladium alloy in a vacuum evaporator using a new combination spinning and tilting device. The TEM specimens were preshadowed with platinum and then rotary coated with carbon in the same device. After stripping the RBC-Pt-C composite film, the RBC's were dissolved in 2.5N HNO3 followed by 0.2N NaOH leaving the preshadowed surface replicas showing positive topography.

Formation of Dislocation Channels in Neutron Irradiated Molybdenum

1972 ◽  
Vol 30 ◽  
pp. 672-673
Author(s):  
S. Mahajan
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Ambient Temperature ◽  
Room Temperature ◽  
Channel Formation ◽  
Early Stages ◽  
Transmission Electron ◽  
Three Stages ◽  
Two Stages ◽  
Polycrystalline Molybdenum

The evolution of dislocation channels in irradiated metals during deformation can be envisaged to occur in three stages: (i) formation of embryonic cluster free regions, (ii) growth of these regions into microscopically observable channels and (iii) termination of their growth due to the accumulation of dislocation damage. The first two stages are particularly intriguing, and we have attempted to follow the early stages of channel formation in polycrystalline molybdenum, irradiated to 5×1019 n. cm−2 (E > 1 Mev) at the reactor ambient temperature (∼ 60°C), using transmission electron microscopy. The irradiated samples were strained, at room temperature, up to the macroscopic yield point.Figure 1 illustrates the early stages of channel formation. The observations suggest that the cluster free regions, such as A, B and C, form in isolated packets, which could subsequently link-up to evolve a channel.

Black-white contrast of dislocation loops

1978 ◽  
Vol 36 (1) ◽  
pp. 328-329
Author(s):  
J. J. Hren ◽  
W. D. Cooper ◽  
L. J. Sykes
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Dislocation Loops ◽  
Major Premise ◽  
Burgers Vector ◽  
Transmission Electron ◽  
Primary Means ◽  
Contrast Analysis ◽  
Dot Product ◽  
Imaging Conditions

Small dislocation loops observed by transmission electron microscopy exhibit a characteristic black-white strain contrast when observed under dynamical imaging conditions. In many cases, the topography and orientation of the image may be used to determine the nature of the loop crystallography. Two distinct but somewhat overlapping procedures have been developed for the contrast analysis and identification of small dislocation loops. One group of investigators has emphasized the use of the topography of the image as the principle tool for analysis. The major premise of this method is that the characteristic details of the image topography are dependent only on the magnitude of the dot product between the loop Burgers vector and the diffracting vector. This technique is commonly referred to as the (g•b) analysis. A second group of investigators has emphasized the use of the orientation of the direction of black-white contrast as the primary means of analysis.

Sign in / Sign up

Export Citation Format

Share Document