Magnetic Properties of Uniform Nanowire arrays

1996 ◽  
Vol 431 ◽  
Author(s):  
P. P. Nguyen ◽  
R. J. Tonucci

AbstractFabrication and magnetic measurements of ferromagnetic (Ni and Co) nanowire arrays using nanochannel glass templates are presented. These nanowire arrays have novel characteristics: The nanowires are very parallel (to within a fraction of a degree) and regularly placed. They are circular with extremely uniform diameter (of less than 80 nm for some samples) both along individual wire's length and among different wires within an array. Magnetic measurements show enhanced coercivities compared to the bulk values. The saturation magnetization for Ni nanowires depends much more strongly on temperature than that for Co nanowires. The coercivities are also dependent strongly on temperature and can be explained by a thermal-activation model.

2010 ◽  
Vol 2010 ◽  
pp. 1-4 ◽  
Author(s):  
Youwen Yang ◽  
Yanbiao Chen ◽  
Yucheng Wu ◽  
Xiangying Chen ◽  
Mingguang Kong

The Co nanowires with different diameters were prepared by pulsed electrodeposition into anodic alumina membranes oxide templates. The micrographs and crystal structures of nanowires were studied by FE-SEM, TEM, and XRD. Due to their cylindrical shape, the nanowires exhibit perpendicular anisotropy. The coercivity and loop squareness (Mr/Ms) of Co nanowires depend strongly on the diameter. Both coercivity and Mr/Ms decrease with increasing wire diameter. The behavior of the nanowires is explained briefly in terms of localized magnetization reversal.


2008 ◽  
Vol 2008 ◽  
pp. 1-7 ◽  
Author(s):  
Jesse Silverberg ◽  
Adam L. Friedman ◽  
Latika Menon

We use anodization of aluminum foil with variable applied anodization voltage to create an alumina template with bifurcated porous structures. The template is then used to electrodeposit Co, fabricating unique bifurcated Co nanowires. In order to better understand the crystal structure of our new material, we then report magnetic properties of these self-assembled bifurcated Co nanowires. Magnetic measurements of the bifurcated wires are studied as functions of branch/stem ratios, wire length, and temperature. The results are compared with those of straight Co nanowires of similar dimensions and thin film Co samples to find that a different crystal lattice structure prevails in the stems than in the branches of the wires.


2011 ◽  
Vol 170 ◽  
pp. 109-113 ◽  
Author(s):  
Anna Bajorek ◽  
Grażyna Chełkowska ◽  
Artur Chrobak ◽  
Marzena Kwiecień-Grudziecka

The paper presents selected magnetic properties of the Gd1-xTbxNi3 intermetallic compounds. Based on the wide-ranging SQUID magnetometer (Quantum Design MPMS, temperature from 1.9K to 300K and magnetic field up to 7T) series of different magnetic measurements were carried out. In studied system the saturation magnetization and the Curie temperature strongly depends of Tb concentration. Moreover, the so-called field cooling - zero field cooling (FC-ZFC) curves reveal a dependence of M(T) on the applied magnetic field. The thermomagnetic curves indicate interesting behaviour which is typical for terbium compounds and can be ascribed to the interaction between different aligned magnetic subblattices.


1970 ◽  
Vol 35 (2) ◽  
pp. 187-195
Author(s):  
Siba P Mondal ◽  
Kazi Hanium Maria ◽  
SS Sikder ◽  
Shireen Akhter ◽  
MA Hakim ◽  
...  

Structural and magnetic measurements have been performed on the FINEMET type of ribbons with nominal composition of Fe74Cu0.5Nb3Si13.5B9 synthesized by rapid solidification technique. The crystallization behavior and the nanocrystal formation have been studied by differential thermal analysis (DTA) and X-ray diffraction (XRD). The crystallization onset temperatures determined by XRD are in good agreement with DTA results. Magnetic permeability and magnetization measurements have been carried out using inductance analyzer and vibrating sample magnetometer (VSM). Magnetic permeability sensitively depends on the annealing temperature which increases sharply with the increase of annealing temperature. Maximum permeability corresponding to optimum annealing temperature (Ta) was observed at Ta = 575°C. Saturation magnetization, Ms, increases with Ta for the sample and finally decreases for annealing at a temperature much higher than peak crystallization temperature. The results show that the amounts of Cu and Nb are very important for the soft magnetic properties of FINEMET alloys. Key words: FINEMET; XRD; Grain size; Permeability; Saturation; Magnetization DOI: http://dx.doi.org/10.3329/jbas.v35i2.9423 JBAS 2011; 35(2): 187-195


2010 ◽  
Vol 09 (06) ◽  
pp. 567-570
Author(s):  
AHMED M. AL-SAIE ◽  
ADNAN JAAFAR ◽  
MOHAMED BOUOUDINA

A mixture of Fe 2 O 3 and SnO oxides has been mechanically milled to form SnFe 2 O 4 spinel phase. X-ray diffraction pattern of the milled mixture shows that after milling, both peaks of Fe 2 O 3 and SnO remain with a drastic decrease of their intensities and broadening. The appearance of a broad halo around 2θ ~ 31° indicates the formation of an amorphous phase. After annealing at 750°C for 1 h, SnO peaks disappear completely and new diffraction peaks emerge indicating the formation of a new nanophase i.e. SnO 2. Magnetic measurements of the as-milled mixture show a ferromagnetic behavior with saturation magnetization Ms = 6.8 emu/g which drastically decreases after annealing to 0.6 emu/g.


2018 ◽  
Vol 56 (1A) ◽  
pp. 65
Author(s):  
Luu Van Thiem

The Co nanowire arrays were fabricated by electrodeposition method by using the porous polycarbonate template. Study on crystallographic structure, micro structure, and the element composition confirmed the quality of the fabricated Co nanowires. SEM image shows the wires with an average diameter of 200 nm and the average length of 9 mm. The magnetic properties, measured at room temperature using vibrating sample magnetometry (VSM), displays that the nanowires have anisotropic property. The angular dependence of coercivity of Co nanowires has been studied. The decrease of the coercivity, when the angular changed from 0 o to 90 o, will be discussed. 


2010 ◽  
Vol 09 (06) ◽  
pp. 595-598
Author(s):  
AHMED M. AL-SAIE

ZnCr 1-x Fe x O 4 system (with x = 0, 0.5, 1, 1.5, and 2) at the nanoscale has been successfully synthesized by a simple combination of milling mixture of Zn , Cr , and Fe oxides precursors. X-ray diffraction and magnetic measurements were carried out on the as-milled powders. XRD pattern clearly shows that the mixed oxides are all nanosized. However, as Fe 2 O 3 increases the ZnCrFeO 4 phase becomes the main phase. However, magnetic measurements do not show any significance in saturation magnetization (Ms), only when the content of Fe becomes 50% and 0.75% the Ms increased drastically to 15.4 and 16.7 emu/g respectively. However, with Fe 75% He and Mr reduced abruptly to half of their values, showing a ferromagnetic behaviour with low He .


2020 ◽  
Vol 16 (4) ◽  
pp. 655-666
Author(s):  
Mona Rekaby

Objective: The influence of Manganese (Mn2+) and Cobalt (Co2+) ions doping on the optical and magnetic properties of ZnO nanoparticles was studied. Methods: Nanoparticle samples of type ZnO, Zn0.97Mn0.03O, Zn0.96Mn0.03Co0.01O, Zn0.95Mn0.03 Co0.02O, Zn0.93Mn0.03Co0.04O, and Zn0.91Mn0.03Co0.06O were synthesized using the wet chemical coprecipitation method. Results: X-ray powder diffraction (XRD) patterns revealed that the prepared samples exhibited a single phase of hexagonal wurtzite structure without any existence of secondary phases. Transmission electron microscope (TEM) images clarified that Co doping at high concentrations has the ability to alter the morphologies of the samples from spherical shaped nanoparticles (NPS) to nanorods (NRs) shaped particles. The different vibrational modes of the prepared samples were analyzed through Fourier transform infrared (FTIR) measurements. The optical characteristics and structural defects of the samples were studied through Photoluminescence (PL) spectroscopy. PL results clarified that Mn2+ and Co2+ doping quenched the recombination of electron-hole pairs and enhanced the number of point defects relative to the undoped ZnO sample. Magnetic measurements were carried out at room temperature using a vibrating sample magnetometer (VSM). (Mn, Co) co-doped ZnO samples exhibited a ferromagnetic behavior coupled with paramagnetic and weak diamagnetic contributions. Conclusion: Mn2+ and Co2+ doping enhanced the room temperature Ferromagnetic (RTFM) behavior of ZnO. In addition, the signature for antiferromagnetic ordering between the Co ions was revealed. Moreover, a strong correlation between the magnetic and optical behavior of the (Mn, Co) co-doped ZnO was analyzed.


2020 ◽  
Vol 10 (2) ◽  
pp. 152-156 ◽  
Author(s):  
Muhammad Hanif bin Zahari ◽  
Beh Hoe Guan ◽  
Lee Kean Chuan ◽  
Afiq Azri bin Zainudin

Background: Rare earth materials are known for its salient electrical insulation properties with high values of electrical resistivity. It is expected that the substitution of rare earth ions into spinel ferrites could significantly alter its magnetic properties. In this work, the effect of the addition of Samarium ions on the structural, morphological and magnetic properties of Ni0.5Zn0.5SmxFe2-xO4 (x=0.00, 0.02, 0.04, 0.06, 0.08, 0.10) synthesized using sol-gel auto combustion technique was investigated. Methods: A series of Samarium-substituted Ni-Zn ferrite nanoparticles (Ni0.5Zn0.5SmxFe2-xO4 where x=0.00, 0.02, 0.04, 0.06, 0.08, 0.10) were synthesized by sol-gel auto-combustion technique. Structural, morphological and magnetic properties of the samples were examined through X-Ray Diffraction (XRD), Field-Emission Scanning Electron Microscope (FESEM) and Vibrating Sample Magnetometer (VSM) measurements. Results: XRD patterns revealed single-phased samples with spinel cubic structure up to x= 0.04. The average crystallite size of the samples varied in the range of 41.8 – 85.6 nm. The prepared samples exhibited agglomerated particles with larger grain size observed in Sm-substituted Ni-Zn ferrite as compared to the unsubstituted sample. The prepared samples exhibited typical soft magnetic behavior as evidenced by the small coercivity field. The magnetic saturation, Ms values decreased as the Sm3+ concentration increases. Conclusion: The substituted Ni-Zn ferrites form agglomerated particles inching towards more uniform microstructure with each increase in Sm3+ substitution. The saturation magnetization of substituted samples decreases with the increase of samarium ion concentration. The decrease in saturation magnetization can be explained based on weak super exchange interaction between A and B sites. The difference in magnetic properties between the samples despite the slight difference in Sm3+ concentrations suggests that the properties of the NiZnFe2O4 can be ‘tuned’, depending on the present need, through the substitution of Fe3+ with rare earth ions.


2013 ◽  
Vol 690-693 ◽  
pp. 1702-1706 ◽  
Author(s):  
Shuang Jun Nie ◽  
Hao Geng ◽  
Jun Bao Wang ◽  
Lai Sen Wang ◽  
Zhen Wei Wang ◽  
...  

NiZn-ferrite thin films were deposited onto silicon and glass substrates by radio frequency magnetron sputtering at room temperature. The effects of the relative oxygen flow ratio on the structure and magnetic properties of the thin films were investigated. The study results reveal that the films deposited under higher relative oxygen flow ratio show a better crystallinity. Static magnetic measurement results indicated that the saturation magnetization of the films was greatly affected by the crystallinity, grain dimension, and cation distribution in the NiZn-ferrite films. The NiZn-ferrite thin films with a maximum saturation magnetization of 151 emucm-3, which is about 40% of the bulk NiZn ferrite, was obtained under relative oxygen flow ratio of 60%.


Sign in / Sign up

Export Citation Format

Share Document