Optical Properties of Si Nanoclusters with Passivated Surfaces

1996 ◽  
Vol 431 ◽  
Author(s):  
L. N. Dinh ◽  
L. L. Chase ◽  
M. Balooch ◽  
W. J. Siekhaus ◽  
F. Wooten
Keyword(s):  
Blue Shift ◽  
Buffer Gas ◽  
X Ray Diffraction ◽  
X Ray ◽  
Synthesis Conditions ◽  
Pl Spectra ◽  
Transmission Electron ◽  
Si Nanocrystals ◽  
Decay Times ◽  
Average Size

AbstractSi nanoclusters with average size of a few nanometers have been synthesized by thermal vaporization of Si in an Ar buffer gas, and passivated with oxygen or atomic hydrogen. High resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD) revealed that these nanoclusters were crystalline. All samples showed strong infrared and/or visible photoluminescence (PL) with varying decay times from nanoseconds to microseconds depending on synthesis conditions. Absorption mainly in the Si cores was observed by photoluminescence excitation (PLE) spectroscopy. The visible components of PL spectra were noted to blue shift and broaden as the size of the Si nanocrystals (nc-Si) was reduced, and there were differences in PL spectra for hydrogen and oxygen passivated nc-Si. Our data can be explained best by a model involving absorption between quantum confined states in the Si cores and emission by surface/interface states.

scholarly journals Controlled Synthesis of CuS and Cu9S5 and Their Application in the Photocatalytic Mineralization of Tetracycline

Catalysts ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 899
Author(s):  
Murendeni P. Ravele ◽  
Opeyemi A. Oyewo ◽  
Damian C. Onwudiwe
Keyword(s):  
Electron Microscopy ◽  
Visible Light ◽  
Blue Shift ◽  
X Ray Diffraction ◽  
X Ray ◽  
Copper Sulfides ◽  
Transmission Electron ◽  
Single Source Precursor ◽  
Pure Phase ◽  
Pure Phases

Pure-phase Cu2−xS (x = 1, 0.2) nanoparticles have been synthesized by the thermal decomposition of copper(II) dithiocarbamate as a single-source precursor in oleylamine as a capping agent. The compositions of the Cu2−xS nanocrystals varied from CuS (covellite) through the mixture of phases (CuS and Cu7.2S4) to Cu9S5 (digenite) by simply varying the temperature of synthesis. The crystallinity and morphology of the copper sulfides were studied using X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), which showed pure phases at low (120 °C) and high (220 °C) temperatures and a mixture of phases at intermediate temperatures (150 and 180 °C). Covellite was of a spherical morphology, while digenite was rod shaped. The optical properties of these nanocrystals were characterized by UV−vis–NIR and photoluminescence spectroscopies. Both samples had very similar absorption spectra but distinguishable fluorescence properties and exhibited a blue shift in their band gap energies compared to bulk Cu2−xS. The pure phases were used as catalysts for the photocatalytic degradation of tetracycline (TC) under visible-light irradiation. The results demonstrated that the photocatalytic activity of the digenite phase exhibited higher catalytic degradation of 98.5% compared to the covellite phase, which showed 88% degradation within the 120 min reaction time using 80 mg of the catalysts. The higher degradation efficiency achieved with the digenite phase was attributed to its higher absorption of the visible light compared to covellite.

scholarly journals PREPARATION OF NICKEL NANOWIRES AND EFFECTS OF SYNTHESIS CONDITIONS ON THEIR MORPHOLOGY

2019 ◽  
Vol 57 (3A) ◽  
pp. 21
Author(s):  
Minh Truong Xuan Nguyen ◽  
Thu Thi Minh Bui ◽  
Cuc Thi Le ◽  
Linh Huu Nguyen ◽  
Y Ngoc Pham ◽  
...  
Keyword(s):  
Synthesis Process ◽  
X Ray Diffraction ◽  
One Dimensional ◽  
X Ray ◽  
Synthesis Conditions ◽  
Nickel Nanowires ◽  
Transmission Electron ◽  
Experimental Parameters ◽  
Polyol Medium ◽  
Nickel Nanostructures

Nickel nanostructures prepared by various methods have received considerable attentions due to their numerous applications. In this study, one-dimensional nickel nanowires (NiNWs) were synthesized by the reduction of nickel (II) chloride in polyol medium. Poly (vinylpyrrolidone) (PVP) served as the surfactant and hydrazine hydrate was used as the reductant. The effects of different experimental parameters, i.e. concentration of Ni2+, volume of N2H4, concentration of PVP and reaction temperature on the formation and morphology of NiNWs were studied. The structure, composition and surface morphology of the materials were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The results showed that the morphology as well as the diameter of NiNWs could be effectively controlled by adjusting parameters of the synthesis process.

scholarly journals Formation of ZnO/Zn0.5Cd0.5Se Alloy Quantum Dots in the Presence of High Oleylamine Contents

Nanomaterials ◽  
2019 ◽  
Vol 9 (7) ◽  
pp. 999
Author(s):  
Yi-An Chen ◽  
Kuo-Hsien Chou ◽  
Yi-Yang Kuo ◽  
Cheng-Ye Wu ◽  
Po-Wen Hsiao ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Quantum Dots ◽  
Particle Size ◽  
X Ray Diffraction ◽  
One Pot ◽  
X Ray ◽  
Transmission Electron ◽  
Average Size ◽  
Alloy Quantum Dots ◽  
First Time

To the best of our knowledge, this report presents, for the first time, the schematic of the possible chemical reaction for a one-pot synthesis of Zn0.5Cd0.5Se alloy quantum dots (QDs) in the presence of low/high oleylamine (OLA) contents. For high OLA contents, high-resolution transmission electron microscopy (HRTEM) results showed that the average size of Zn0.5Cd0.5Se increases significantly from 4 to 9 nm with an increasing OLA content from 4 to 10 mL. First, [Zn(OAc)2]–OLA complex can be formed by a reaction between Zn(OAc)2 and OLA. Then, Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) data confirmed that ZnO is formed by thermal decomposition of the [Zn(OAc)2]–OLA complex. The results indicated that ZnO grew on the Zn0.5Cd0.5Se surface, thus increasing the particle size. For low OLA contents, HRTEM images were used to estimate the average sizes of the Zn0.5Cd0.5Se alloy QDs, which were approximately 8, 6, and 4 nm with OLA loadings of 0, 2, and 4 mL, respectively. We found that Zn(OAc)2 and OLA could form a [Zn(OAc)2]–OLA complex, which inhibited the growth of the Zn0.5Cd0.5Se alloy QDs, due to the decreasing reaction between Zn(oleic acid)2 and Se2−, which led to a decrease in particle size.

Synthesis and Characterization of Cu2FeSnS4 Semiconductor Nanocrystals with Zincblende Structure

2012 ◽  
Vol 512-515 ◽  
pp. 2019-2022 ◽  
Author(s):  
Xiao Lu Liang ◽  
Xian Hua Wei
Keyword(s):  
Random Distribution ◽  
Semiconductor Nanocrystals ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Nir Absorption ◽  
Average Size

Cu2FeSnS4semiconductor nanocrystals with zincblende structure have been successfully synthesized by a hot-injection approach. Cu+, Fe2+, and Sn4+cations have a random distribution in the zincblende unit cell, and the occupancy possibilities are 1/2, 1/4 and 1/4, respectively. Those nanocrystals were characterized by means of X-ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), energy dispersive spectroscopy (EDS), and UV-Vis-NIR absorption spectroscopy. The Cu2FeSnS4 nanocrystals have an average size of 7.5 nm and a band gap of 0.92 eV.

scholarly journals Influence of different synthesis conditions on properties of oleic acid-coated-Fe3O4 nanoparticles

2015 ◽  
Vol 33 (1) ◽  
pp. 100-106 ◽  
Author(s):  
Atieh Aliakbari ◽  
Majid Seifi ◽  
Sharareh Mirzaee ◽  
Hoda Hekmatara
Keyword(s):  
Oleic Acid ◽  
Room Temperature ◽  
Magnetic Measurement ◽  
Precursor Solution ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Synthesis Conditions ◽  
Transmission Electron ◽  
Ft Ir

AbstractIn the present paper, iron oxide nanoparticles coated by oleic acid have been synthesized in different conditions by coprecipitation method. For investigating the effect of time spent on adding the oleic acid to the precursor solution, two different processes have been considered. The as synthesized samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FT-IR). Magnetic measurement was carried out at room temperature using a vibrating sample magnetometer (VSM). The results show that the magnetic nanoparticles decorated with oleic acid decreased the saturation of magnetization. From the data, it can also be concluded that the magnetization of Fe3O4/oleic acid nanoparticles depends on synthesis conditions.

Preparation and Characterization of CdSe Nanoparticles Synthesized Using the Ultrasonic Irradiation

2007 ◽  
Vol 124-126 ◽  
pp. 1229-1232 ◽  
Author(s):  
Myoung Seok Sung ◽  
Yoon Bok Lee ◽  
Yong Jin Kim ◽  
Yang Do Kim
Keyword(s):  
Ultrasonic Irradiation ◽  
Photoelectron Spectroscopy ◽  
Irradiation Time ◽  
Xrd Analysis ◽  
Cdse Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Surface Emission ◽  
Transmission Electron ◽  
Average Size

Cadmium selenide(CdSe) nanoparticles were prepared in the aqueous solution containing isopropyl alcohol by the ultrasonic irradiation at room temperature. The cadmium chloride (CdCl2) and sodium selenosulfate (Na2SeSO3) were used as the cadmium and selenium source, respectively. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), UV-Vis absorption spectra and PL spectra were used to characterize the CdSe nanoparticles. XRD analysis revealed the formation of cubic structure CdSe. TEM images showed aggregated CdSe nanoparticles with the size of nanometer scale. Average size of CdSe nanoparticles were about 3.9, 5.0 and 5.1nm with sonication time of 6, 30 and 40 minutes, respectively. The surface emission became less intensive and shifted to red with increasing irradiation time. This paper presents the effects of ultrasonic on the formation of CdSe nanoparticles and its characteristics.

Preparation of Nanosized TiO2 Synthesized by Sol-Gel Pathway Using Ionic Liquid as Assistant and its Photocatalytic Activities

2012 ◽  
Vol 535-537 ◽  
pp. 2240-2244
Author(s):  
Wei Wei ◽  
Chang Shun Yu ◽  
Shao Jun Wang ◽  
Qing Da An
Keyword(s):  
Ionic Liquid ◽  
Diffuse Reflectance ◽  
Sol Gel ◽  
Rutile Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Photocatalytic Activities ◽  
Average Size ◽  
Nanosized Tio2

Nanosized TiO2 particles were synthesized by sol-gel method using ionic liquid as assistant. The samples were characterized by UV-vis diffuse reflectance spectra, X-ray diffraction (XRD), transmission electron microscopy (TEM). It was shown that the phase detectable was mainly rutile phase with uniform sphericity and the average size was 10nm. Along with the rise of sintering temperature, grain diameter became bigger. The photocatalytic activities of nanosized TiO2 were evaluated by the reduction yield in the presence of CO2 and water. The result showed that TiO2 catalysts has efficient photocatalytic activities, of which made with [OMIM]BF4 displayed the highest photocatalytic active in the experiment.

Homogeneity in the Polyether Alkoxide Sol‐Gel Synthesis of YBa2Cu3O7-δ

1994 ◽  
Vol 346 ◽  
Author(s):  
Carol S. Houk ◽  
Gary A. Burgoine ◽  
Catherine J. Page
Keyword(s):  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Diffraction Patterns ◽  
Mapping Techniques ◽  
Starting Solutions ◽  
Average Size ◽  
Sol Gel Synthesis ◽  
Elemental Maps

ABSTRACTWe have investigated the homogeneity of sol‐gel derived YBa2Cu307‐s from the solution phase to the final product using transmission electron microscopy (TEM), x‐ray diffraction (XRD), and Energy Dispersive X‐ray (EDX) lateral mapping techniques. The starting solutions contain stoichiometric amounts of the metal 2‐(2‐methoxyethoxy)ethoxide components in 2‐(2‐methoxyethoxy)ethanol and appear to be homogeneous by TEM with a uniform distribution of particles having an average size of less than 40 â. Through elemental mapping we see elemental segregation in the high temperature (950 °C) products, which are orthorhombic by XRD. In elemental maps of gel samples fired to 700 °C, which are tetragonal by XRD, we also see elemental inhomogeneity within particles and phase zoning in maps of products from finely ground gels. A comparison of elemental maps and x‐ray diffraction patterns of the products from gel processing and conventional solid state processing is made.

scholarly journals Luminescence, Energy Transfer, and Upconversion Mechanisms of Y2O3Nanomaterials Doped with Eu3+,Tb3+, Tm3+,Er3+, and Yb3+Ions

2007 ◽  
Vol 2007 ◽  
pp. 1-10 ◽  
Author(s):  
TranKim Anh ◽  
Paul Benalloul ◽  
Charles Barthou ◽  
Lam thiKieu Giang ◽  
Nguyen Vu ◽  
...  
Keyword(s):  
Energy Transfer ◽  
Doping Concentration ◽  
Spherical Shape ◽  
X Ray Diffraction ◽  
X Ray ◽  
Decay Times ◽  
Structure Phase ◽  
High Resolution Tem ◽  
Average Size ◽  
20 Nm

Luminescence, energy transfer, and upconversion mechanisms of nanophosphors (Y2O3 : Eu3+,Tb3+,Y2O3 : Tm3+,Y2O3 : Er3+,Yb3+) both in particle and colloidal forms were studied. The structure, phase, and morphology of the nanopowders and nanocolloidal media were determined by high-resolution TEM and X-ray diffraction. It was shown that the obtained nanoparticles have a round-spherical shape with average size in the range of 4 to 20 nm. Energy transfer was observed forY2O3 : Eu3+,Tb3+colloidal and powders, upconversion transitions were observed for bothY2O3 : Er3+andY2O3 : Er3+,Yb3+nanophosphors. The dependence of photoluminescence (PL) spectra and decay times on doping concentration has been investigated. The infrared to visible conversion of emission inY2O3 : Er3+,Yb3+system was analyzed and discussed aiming to be applied in the photonic technology.

scholarly journals Surface Modified Ni Nanoparticles Produced by the Electrical Explosion of Wire

2015 ◽  
Vol 233-234 ◽  
pp. 513-516 ◽  
Author(s):  
A.P. Safronov ◽  
Galina V. Kurlyandskaya ◽  
S.M. Bhagat ◽  
I.V. Beketov ◽  
A.M. Murzakaev ◽  
...  
Keyword(s):  
Room Temperature ◽  
Electrical Explosion ◽  
Resonant Absorption ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cell Parameters ◽  
Transmission Electron ◽  
Average Size ◽  
Surface Modified ◽  
Made In

Spherical nickel nanoparticles were prepared by the electrical explosion of wire. The as-prepared nanoparticles were modified immediately after fabrication at room temperature in order to provide tunable surface properties with focus on the development of composites filled with nanoparticles. Following liquid modificators were used: hexane, toluene and the solution of polystyrene in toluene. In one case the surface modification by carbon was made in gas phase as a result of hydrocarbon injection. The average size of the nanoparticles was about 50 nm and unit cell parameters were close to 0.351 nm. Detailed characterization was done by X-ray diffraction, transmission electron microscopy, and magnetization measurements. Sphericity was also checked using microwave resonant absorption.

Sign in / Sign up

Export Citation Format

Share Document