Influence of Aggressive Liquid Environment on the Physico-Chemical and Mechanical Characteristics of Mortar-Radwaste Mixture Form

1994 ◽  
Vol 353 ◽  
Author(s):  
Aleksandar D Perić ◽  
Ilija B Plećaš ◽  
Radojko S Pavlović
Keyword(s):  
Mechanical Strength ◽  
Mechanical Characteristics ◽  
Ph Value ◽  
Matrix Material ◽  
Liquid Environment ◽  
Leach Rate ◽  
Physico Chemical ◽  
Water To Cement Ratio ◽  
The Matrix ◽  
Leaching Experiments

AbstractMortar was used as a matrix material in an immobilization process of radioactive waste material, 137CsCl solution, where the final product had a water-to-cement ratio of 0.36. Solidified orthocylinder shaped samples, H=4.5 cm, with the exposed surface area completely open to contact leachant medium, were used in prospecting physico-chemical and mechanical characteristics of mortar-radwaste mixture forms. After curing period of 28 days in an atmosphere of defined parameters, samples were introduced to leaching in the specific leachant media. Leachants were chosen up to their aggressive influence on matrix material deterioration and decomposition: distilled water, chloride and sulphate solutions. Experiments were performed for 730 days and the 137Cs cumulative leached fraction for each leachant was calculated. Leach-rate steady-state values were obtained after approximately 290 days. The same trend in obtaining saturation value was noticed in an investigations of pH value and Ca2+ concentration in the three groups of leachants, due to a Ca2+ depletion from the matrix structure. Mortar-radwaste mixture samples were withdrawn from the leaching experiments and investigated on their mechanical strength. Mechanical strength characteristics adopted a decreasing trend for the samples treated in leachants longer than 100 days, which continued in the two years period of experimental duration.

Influence of the Titanium Dioxide Addition in Matrix Formulation on the Radwaste-Mortar Matrix Characteristics

1995 ◽  
Vol 412 ◽  
Author(s):  
Aleksandar D. Perić
Keyword(s):  
Titanium Dioxide ◽  
Mechanical Strength ◽  
Chemical Properties ◽  
High Water ◽  
Matrix Formulation ◽  
Leach Rate ◽  
Physico Chemical ◽  
The Matrix ◽  
Ph Range ◽  
Mortar Matrix

AbstractThe rutile form of titanium dioxide (TiO2) was added to mortar matrix preparations with the objective to improve the mechanical and physico-chemical characteristics of the radwaste-mortar matrix mixtures, in particular the leach-rate of the immobilized radionuclide. The final solidified radwaste form was made with high water-to-cement ratio (0.36) for easy leaching of the immobilized radionuclide, 37Cs. TiO2was added to the mortar formulation, replacing the appropriate amount of cement, in the amounts of 1,2,5,8 and 10 weight percents of total cement weight. In the highly basic environment of the mortar (pH ≅ 12), the titanium will form a HTiO-type membrane, which is semi-permeable and selective for the cations like Cs+ in the pH range above 5.5. Only the rutile form of TiO2was observed in the prospected radwastemortar mixture samples, using X-ray Fluorescence Spectrometry. Nevertheless, 137Cs leach-rate for the matrix formulations prepared with TiO2 was notably lower than the normally prepared (TiO2 free) samples. Furthermore, the mechanical strength of the samples prepared with TiO2 was higher than that of the TiO 2-free samples, and the correlation between the mechanical strength and TiO2 content appears to be exponential over the composition range explored here. Improvement of the physico-chemical properties of the titanium prepared formulations, is a topic of further investigations.

Polishing process effect on the image of dispersed precipitates

1984 ◽  
Vol 42 ◽  
pp. 534-535
Author(s):  
C.T. Hu ◽  
C.W. Allen
Keyword(s):  
Matrix Material ◽  
Specimen Preparation ◽  
Second Phase ◽  
Precipitate Particle ◽  
Polishing Process ◽  
Second Phase Particles ◽  
The Matrix ◽  
Surface Profiles ◽  
Thinning Process

One important problem in determination of precipitate particle size is the effect of preferential thinning during TEM specimen preparation. Figure 1a schematically represents the original polydispersed Ni3Al precipitates in the Ni rich matrix. The three possible type surface profiles of TEM specimens, which result after electrolytic thinning process are illustrated in Figure 1b. c. & d. These various surface profiles could be produced by using different polishing electrolytes and conditions (i.e. temperature and electric current). The matrix-preferential-etching process causes the matrix material to be attacked much more rapidly than the second phase particles. Figure 1b indicated the result. The nonpreferential and precipitate-preferential-etching results are shown in Figures 1c and 1d respectively.

Application of cross correlation to HREM images of surfaces

1987 ◽  
Vol 45 ◽  
pp. 754-755
Author(s):  
D. E. Luzzi ◽  
L. D. Marks ◽  
M. I. Buckett
Keyword(s):  
Cross Correlation ◽  
A Priori ◽  
Matrix Material ◽  
Correlation Method ◽  
Accurate Knowledge ◽  
Complex Image ◽  
Fourier Filtering ◽  
The Matrix ◽  
Low Pass ◽  
Data Reduction Technique

As the HREM becomes increasingly used for the study of dynamic localized phenomena, the development of techniques to recover the desired information from a real image is important. Often, the important features are not strongly scattering in comparison to the matrix material in addition to being masked by statistical and amorphous noise. The desired information will usually involve the accurate knowledge of the position and intensity of the contrast. In order to decipher the desired information from a complex image, cross-correlation (xcf) techniques can be utilized. Unlike other image processing methods which rely on data massaging (e.g. high/low pass filtering or Fourier filtering), the cross-correlation method is a rigorous data reduction technique with no a priori assumptions.We have examined basic cross-correlation procedures using images of discrete gaussian peaks and have developed an iterative procedure to greatly enhance the capabilities of these techniques when the contrast from the peaks overlap.

Impact Strength, Flexural Modulus and Wear Rate of PMMA Composites Reinforced by Eggshell Powders

2020 ◽  
Vol 38 (7A) ◽  
pp. 960-966
Author(s):  
Aseel M. Abdullah ◽  
Hussein Jaber ◽  
Hanaa A. Al-Kaisy
Keyword(s):  
Impact Strength ◽  
Wear Rate ◽  
Flexural Modulus ◽  
Matrix Material ◽  
Weight Fraction ◽  
Pure Pmma ◽  
Calcination Process ◽  
The Matrix ◽  
The Impact ◽  
Interface Bond

In the present study, the impact strength, flexural modulus, and wear rate of poly methyl methacrylate (PMMA) with eggshell powder (ESP) composites have been investigated. The PMMA used as a matrix material reinforced with ESP at two different states (including untreated eggshell powder (UTESP) and treated eggshell powder (TESP)). Both UTESP and TESP were mixed with PMMA at different weight fractions ranged from (1-5) wt.%. The results revealed that the mechanical properties of the PMMA/ESP composites were enhanced steadily with increasing eggshell contents. The samples with 5 wt.% of UTESP and TESP additions give the maximum values of impact strength, about twice the value of the pure PMMA sample. The calcination process of eggshells powders gives better properties of the PMMA samples compared with the UTESP at the same weight fraction due to improvements in the interface bond between the matrix and particles. The wear characteristics of the PMMA composites decrease by about 57% with increases the weight fraction of TESP up to 5 wt.%. The flexural modulus values are slightly enhanced by increasing of the ESP contents in the PMMA composites.

Controlled and uncontrolled physicochemical quality indicators of 0.9 % sodium chloride of various manufacturers

2020 ◽  
pp. 6-11
Author(s):  
Anton Kasatkin ◽  
Anna Nigmatullina ◽  
Mikhail Kopytov
Keyword(s):  
Sodium Chloride ◽  
Quality Indicators ◽  
Clinical Studies ◽  
Laboratory Tests ◽  
Ph Value ◽  
Chemical Parameters ◽  
Pharmacokinetics And Pharmacodynamics ◽  
Physicochemical Quality ◽  
Physico Chemical

The article presents the results of studies of osmolality and pH of 0,9 % sodium chloride of various manufacturers. To obtain data on the pH value, the data used in the passports are used, and the indicators of its osmolality are de- termined using laboratory tests. 0,9 % sodium chloride from different manufacturers has different pH and osmolality. Knowing the actual values of physico-chemical parameters can increase the accuracy of the results of future clinical studies, which compare the pharmacokinetics and pharmacodynamics of modern plasma-substituting solutions and a solution of 0,9 % sodium chloride.

scholarly journals The Impact of Filler Geometry on Polylactic Acid-Based Sustainable Polymer Composites

Molecules ◽  
2020 ◽  
Vol 26 (1) ◽  
pp. 149
Author(s):  
Karol Leluk ◽  
Stanisław Frąckowiak ◽  
Joanna Ludwiczak ◽  
Tomasz Rydzkowski ◽  
Vijay Kumar Thakur
Keyword(s):  
Polymer Composites ◽  
Polylactic Acid ◽  
Matrix Material ◽  
Chemical Properties ◽  
Precipitated Calcium Carbonate ◽  
Cellulose Fibres ◽  
Shape Factors ◽  
Pure Cellulose ◽  
Physico Chemical ◽  
The Impact

Recently, biocomposites have emerged as materials of great interest to the scientists and industry around the globe. Among various polymers, polylactic acid (PLA) is a popular matrix material with high potential for advanced applications. Various particulate materials and nanoparticles have been used as the filler in PLA based matrix. One of the extensively studied filler is cellulose. However, cellulose fibres, due to their hydrophilic nature, are difficult to blend with a hydrophobic polymer matrix. This leads to agglomeration and creates voids, reducing the mechanical strength of the resulting composite. Moreover, the role of the various forms of pure cellulose and its particle shape factors has not been analyzed in most of the current literature. Therefore, in this work, materials of various shapes and shape factors were selected as fillers for the production of polymer composites using Polylactic acid as a matrix to fill this knowledge gap. In particular, pure cellulose fibres (three types with different elongation coefficient) and two mineral nanocomponents: precipitated calcium carbonate and montmorillonite were used. The composites were prepared by a melt blending process using two different levels of fillers: 5% and 30%. Then, the analysis of their thermomechanical and physico-chemical properties was carried out. The obtained results were presented graphically and discussed in terms of their shape and degree of filling.

scholarly journals Self-Reinforced Nylon 6 Composite for Smart Vibration Damping

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1235
Author(s):  
Bidita Salahuddin ◽  
Rahim Mutlu ◽  
Tajwar A. Baigh ◽  
Mohammed N. Alghamdi ◽  
Shazed Aziz
Keyword(s):  
Matrix Material ◽  
Nylon 6 ◽  
Vibration Damping ◽  
Vibration Energy ◽  
Damping Factor ◽  
Passive Vibration Control ◽  
Reinforced Composite ◽  
Coiled Structure ◽  
The Matrix ◽  
3D Printed

Passive vibration control using polymer composites has been extensively investigated by the engineering community. In this paper, a new kind of vibration dampening polymer composite was developed where oriented nylon 6 fibres were used as the reinforcement, and 3D printed unoriented nylon 6 was used as the matrix material. The shape of the reinforcing fibres was modified to a coiled structure which transformed the fibres into a smart thermoresponsive actuator. This novel self-reinforced composite was of high mechanical robustness and its efficacy was demonstrated as an active dampening system for oscillatory vibration of a heated vibrating system. The blocking force generated within the reinforcing coiled actuator was responsible for dissipating vibration energy and increase the magnitude of the damping factor compared to samples made of non-reinforced nylon 6. Further study shows that the appropriate annealing of coiled actuators provides an enhanced dampening capability to the composite structure. The extent of crystallinity of the reinforcing actuators is found to directly influence the vibration dampening capacity.

scholarly journals Fabrication and Characterization of the Modified EV31-Based Metal Matrix Nanocomposites

Metals ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 125
Author(s):  
Seyed Kiomars Moheimani ◽  
Mehran Dadkhah ◽  
Mohammad Hossein Mosallanejad ◽  
Abdollah Saboori
Keyword(s):  
Thermal Expansion ◽  
Mechanical Strength ◽  
Metal Matrix ◽  
Coefficient Of Thermal Expansion ◽  
Structural Effect ◽  
Metal Matrix Nanocomposites ◽  
Mechanical Stirring ◽  
Specific Strength ◽  
The Matrix ◽  
Matrix Nanocomposites

Metal matrix nanocomposites (MMNCs) with high specific strength have been of interest for numerous researchers. In the current study, Mg matrix nanocomposites reinforced with AlN nanoparticles were produced using the mechanical stirring-assisted casting method. Microstructure, hardness, physical, thermal and electrical properties of the produced composites were characterized in this work. According to the microstructural evaluations, the ceramic nanoparticles were uniformly dispersed within the matrix by applying a mechanical stirring. At higher AlN contents, however, some agglomerates were observed as a consequence of a particle-pushing mechanism during the solidification. Microhardness results showed a slight improvement in the mechanical strength of the nanocomposites following the addition of AlN nanoparticles. Interestingly, nanocomposite samples were featured with higher electrical and thermal conductivities, which can be attributed to the structural effect of nanoparticles within the matrix. Moreover, thermal expansion analysis of the nanocomposites indicated that the presence of nanoparticles lowered the Coefficient of Thermal Expansion (CTE) in the case of nanocomposites. All in all, this combination of properties, including high mechanical strength, thermal and electrical conductivity, together with low CTE, make these new nanocomposites very promising materials for electro packaging applications.

scholarly journals Hemp Fiber Reinforced Red Mud/Fly Ash Geopolymer Composite Materials: Effect of Fiber Content on Mechanical Strength

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 511 ◽  
Author(s):  
Eyerusalem A. Taye ◽  
Judith A. Roether ◽  
Dirk W. Schubert ◽  
Daniel T. Redda ◽  
Aldo R. Boccaccini
Keyword(s):  
Fly Ash ◽  
Mechanical Strength ◽  
Red Mud ◽  
Fiber Reinforced ◽  
Brazilian Tensile Strength ◽  
Hemp Fiber ◽  
Hemp Fibers ◽  
The Matrix ◽  
Geopolymer Composites ◽  
Scanning Electron

Novel hemp fiber reinforced geopolymer composites were fabricated. The matrix was a new geopolymer based on a mixture of red mud and fly ash. Chopped, randomly oriented hemp fibers were used as reinforcement. The mechanical properties of the geopolymer composite, such as diametral tensile (DTS) (or Brazilian tensile) strength and compressive strength (CS), were measured. The geopolymer composites reinforced with 9 vol.% and 3 vol.% hemp fiber yielded average DTS values of 5.5 MPa and average CS values of 40 MPa. Scanning electron microscopy (SEM) studies were carried out to evaluate the microstructure and fracture surfaces of the composites. The results indicated that the addition of hemp fiber is a promising approach to improve the mechanical strength as well as to modify the failure mechanism of the geopolymer, which changed from brittle to “pseudo-ductile”.

scholarly journals Microencapsulation of Flaxseed Oil—State of Art

Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 295
Author(s):  
Asma Yakdhane ◽  
Sabrine Labidi ◽  
Donia Chaabane ◽  
Anita Tolnay ◽  
Arijit Nath ◽  
...  
Keyword(s):  
Fatty Acids ◽  
Gum Arabic ◽  
Tween 80 ◽  
Flaxseed Oil ◽  
Review Article ◽  
Wall Material ◽  
Physico Chemical ◽  
Comprehensive Information ◽  
The Matrix

Microencapsulation is a well-known technology for the lipid delivery system. It prevents the oxidation of fatty acids and maintains the quality of lipid after extraction from oil seed and processing. In flaxseed oil, the amount of ω-3 and ω-6 polyunsaturated fatty acids are 39.90–60.42% and 12.25–17.44%, respectively. A comprehensive review article on the microencapsulation of flaxseed oil has not been published yet. Realizing the great advantages of flaxseed oil, information about different technologies related to the microencapsulation of flaxseed oil and their characteristics are discussed in a comprehensive way, in this review article. To prepare the microcapsule of flaxseed oil, an emulsion of oil-water is performed along with a wall material (matrix), followed by drying with a spray-dryer or freeze-dryer. Different matrices, such as plant and animal-based proteins, maltodextrin, gum Arabic, and modified starch are used for the encapsulation of flaxseed oil. In some cases, emulsifiers, such as Tween 80 and soya lecithin are used to prepare flaxseed oil microcapsules. Physico-chemical and bio-chemical characteristics of flaxseed oil microcapsules depend on process parameters, ratio of oil and matrix, and characteristics of the matrix. As an example, the size of the microcapsule, prepared with spray-drying and freeze-drying ranges between 10–400 and 20–5000 μm, respectively. It may be considered that the comprehensive information on the encapsulation of flaxseed oil will boost the development of functional foods and biopharmaceuticals.

Sign in / Sign up

Export Citation Format

Share Document