Volcanic Glass as a Natural Analog for Borosilicate Waste Glass

1993 ◽  
Vol 333 ◽  
Author(s):  
Maury E. Morgenstein ◽  
Don L. Shettel

ABSTRACTObsidian and basaltic glass are opposite end-members of natural volcanic glass compositions. Syngenetic and diagenetic tensile failure in basaltic glass (low silica glass) is pervasive and provides abundant alteration fronts deep into the glass structure. Perlitic fracturing in obsidian (high silica glass) limits the alteration zones to an “onion skin” geometry. Borosilicate waste glass behaves similarly to the natural analog of basaltic glass (sideromelane).During geologic time, established and tensile fracture networks form glass cells (a three-dimensional reticulated pattern) where the production of new fracture surfaces increases through time by geometric progression. This suggests that borosilicate glass monoliths will eventually become rubble. Rates of reaction appear to double for every 12C° of temperature increase. Published leach rates suggest that the entire inventory of certain radionuclides may be released during the 10,000 year regulatory time period. Steam alteration prior to liquid attack combined with pervasive deep tensile failure behavior may suggest that the glass waste form is not license defensible without a metallic- and/or ceramic-type composite barrier as an overpack.

1993 ◽  
Vol 333 ◽  
Author(s):  
A. Abdelouas ◽  
J. L. Crovisier ◽  
W. Lutze ◽  
R. Müller ◽  
W. Bernotat

ABSTRACTThe R7T7 and synthetic basaltic glasses were submitted to corrosion in a saline MgCl2dominated solution at 190°C. For both glasses, the early alteration product is a hydrotalcite-like compound in which HPO42-, SO4-2and Cl-substitutes to CO32. The measured d003spacing is 7.68 Å for the hydrotalcite formed from R7T7 glass and 7.62 Å for the hydrotalcite formed from basaltic glass which reflect the high aluminium content. Chemical microanalyses show that the hydrotalcite is subsequently covered by a silica-rich gel which evolves into saponite after few months.


2021 ◽  
Vol 898 ◽  
pp. 27-33
Author(s):  
Petr Figala ◽  
Rostislav Drochytka ◽  
Vit Černý ◽  
Radek Hermann ◽  
Jiří Kolísko

This paper deals with the study of chemical resistance of new cement-based grout for invert grouting. The aim of this work is to verify new mixtures with specific admixtures. The study monitors resistance to external sulphate attack. Specimens were placed into sulphate solution 29.8 g∙l-1 (44 g∙l-1 Na2SO4) according to DIN19753 standard. Based on the results gained, new mixtures will be designed and optimized by addition of suitable secondary raw materials (fly ash, waste foundry sand, waste glass, waste filers).


Author(s):  
Gbadamosi Aderemi Tobi ◽  
Ogunsuyi Raphael Abidemi ◽  
Ojo Meshach Felix

With the rapid economic growth and continuously increased consumption, a large amount of glass waste materials is generated; this study investigated the effect of crushed waste glass as filler and also as an aggregate in the asphalt binder course. It compares the glassphalt mix with the specification range at different percentages to meet specifications limit according to Nigeria roads and bridges reverse book of 1997 Waste glass are cleaned and crushed from the glass bottles and added to the asphalt as a filler and as a replacement for coarse aggregates, the marshal method is used to determine the optimum bitumen content and evaluate the properties of the asphalt mix. However, 24 samples were prepared in total, 12 samples each for the asphalt mix used to determine the optimum bitumen content and the other 12 samples for the glassphalt mix used to find out the effect of adding the different percentages of crushed waste glass to the asphalt mixture. The Marshall test carried out on the asphalt mixtures showed that the optimum bitumen content of bitumen was found out to be 6.2% of the asphalt mix by weight. Also, Marshall Test carried out on the glassphalt mix showed the optimum percentage of glass used in the binder course of the weights of aggregates in the asphalt mix. The result of this experiment is been checked to be consistent with the Nigeria road and bridges reverse book of 1997, i.e. Marshall Stability, flow, bulk density, and air voids.


2019 ◽  
Vol 69 (335) ◽  
pp. 194 ◽  
Author(s):  
S. Stoleriu ◽  
I. N. Vlasceanu ◽  
C. Dima ◽  
A. I. Badanoiu ◽  
G. Voicu

Porous alkali activated materials (AAM), can be obtained from waste glass powder and slag mixtures by alkali activation with NaOH solution. To obtain an adequate porous microstructure, the hardened AAM pastes were thermally treated at temperatures ranging between 900°C and 1000°C, for 60 or 30 minutes. Due to the intumescent behaviour specific for this type of materials, an important increase of the volume and porosity occurs during the thermal treatment. The partial substitution of waste glass powder with slag, determines the increase of compressive strength assessed before (up to 37 MPa) and after (around 10 MPa) thermal treatment; the increase of slag dosage also determines the increase of the activation temperature of the intumescent process (above 950°C). The high porosity and the specific microstructure (closed pores with various shapes and sizes) of these materials recommend them to be utilised as thermal and acoustical insulation materials.


1997 ◽  
Vol 506 ◽  
Author(s):  
F. Angeli ◽  
P. Faucon ◽  
T. Charpentier ◽  
J.C. Petit ◽  
J. Virlet

ABSTRACTThe local cation environments in a borosilicate glass (containing the main components of the French nuclear waste glass, R7T7) and of basaltic-like glass are presented on the basis of17A1 and23Na Multi-Quanta Magic-Angle Spinning Nuclear Magnetic Resonance (MQ-MAS NMR) spectroscopies. The chemical and geometrical environment of each nucleus is characterized. Moreover, qualitative information about the distribution of these parameters, characteristic of the disorder level in the structure, is obtained. These results are presented with the characteristics of the Al and Na dissolution in water at 100°C. The relation between the local environments of these cations and their mass loss in solution is discussed.


1986 ◽  
Vol 84 ◽  
Author(s):  
Ned E. Bibler ◽  
Carol M. Jantzen

AbstractIn the geologic disposal of nuclear waste glass, the glass will eventually interact with groundwater in the repository system. Interactions can also occur between the glass and other waste package materials that are present. These include the steel canister that holds the glass, the metal overpack over the canister, backfill materials that may be used, and the repository host rock. This review paper systematizes the additional interactions that materials in the waste package will impose on the borosilicate glass waste form-groundwater interactions. The repository geologies reviewed are tuff, salt, basalt, and granite. The interactions emphasized are those appropriate to conditions expected after repository closure, e.g. oxic vs. anoxic conditions. Whenever possible, the effect of radiation from the waste form on the interactions is examined. The interactions are evaluated based on their effect on the release and speciation of various elements including radionuclides from the glass. It is noted when further tests of repository interactions are needed before long-term predictions can be made.


Sign in / Sign up

Export Citation Format

Share Document