Stress Dependence of the Velocity of Threading Dislocation Segments in Si - Ge Heteroepggaxial Films.

1993 ◽  
Vol 308 ◽  
Author(s):  
Veronique T. Gillard ◽  
David B. Noble ◽  
William D. Nix
Keyword(s):  
Dislocation Line ◽  
Dislocation Motion ◽  
The Other ◽  
Good Representation ◽  
Threading Dislocation ◽  
Stress Dependence ◽  
Stress Range ◽  
Kink Mode ◽  
Annealing Experiments

ABSTRACTThis paper presents data for threading dislocation velocities measured in Si-Ge heteroepitaxial thin films during in situ HVTEM annealing experiments. These data are compared to three models which were previously developed to describe the kink mode of dislocation motion. Two of these models, Hirth and Lothe [1] and Seeger-Schiller [2], are based on the discrete narrow kink representation. The other, developed by Büttiker and Landauer [3], is based on the macroscopic bulge model representation of the dislocation line. It is found that both the narrow kink models underestimate dislocation velocities in the stress range of the experiments and that a good representation of the data can be obtained by using the macroscopic bulge model in the dislocation length-dependent regime.

In situ studies of deformation at interfaces

1989 ◽  
Vol 47 ◽  
pp. 616-617
Author(s):  
William A. T. Clark
Keyword(s):  
Electron Microscope ◽  
Dislocation Motion ◽  
The Other ◽  
Deformation Mechanisms ◽  
Complementary Information ◽  
Fundamental Interest ◽  
Dynamic Experiments ◽  
Macroscopic Deformation ◽  
Polycrystalline Solids

During the last twenty-five years there have been a number of studies of dislocation motion and interactions performed in the electron microscope. In general these observations have been limited by a number of technical shortcomings which have compromised their usefulness. In recent years, however, significant developments in the design and construction of specimen stages and in systems for recording in situ experiments in real time in the electron microscope have led to a renewed interest in dynamic experiments. One such application is the study of the interaction of dislocations with interfaces in polycrystalline solids, a topic which is of fundamental interest in understanding the laws which govern macroscopic deformation. It has been clearly demonstrated that in situ experiments are essential to this investigation, as they have provided direct observation of deformation mechanisms which conventional TEM analyses, in which the samples are deformed before they are put in the microscope, cannot. The two types of TEM observations provide complementary information, each greatly enhancing the value of the other.

In situ transmission electron microscopy investigation of threading dislocation motion in passivated thin aluminum films

1999 ◽  
Vol 14 (12) ◽  
pp. 4673-4676 ◽  
Author(s):  
R-M. Keller-Flaig ◽  
M. Legros ◽  
W. Sigle ◽  
A. Gouldstone ◽  
K. J. Hemker ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Dislocation Motion ◽  
Aluminum Film ◽  
Threading Dislocation ◽  
Cross Sectional ◽  
Aluminum Films ◽  
Transmission Electron ◽  
Microscopy Investigation

In situ transmission electron microscopy (TEM) was performed to study dislocation motion during temperature cycles in aluminum films passivated with a SiO2 layer. The films were cycled from room temperature to 450 °C. Wedge-haped cross-sectional TEM samples were used to retain the constraint of the Si substrate. Besides interactions between dislocations and interfaces, the movement of threading dislocations within the constrained aluminum film was observed. This observation provides an experimental corroboration of the occurrence of threading dislocation motion, which is the basis for rationalizing the high-ield strength of thin films in available models of thin-film plasticity.

A very rapid in situ Kikuchi technique to determine relative crystal misorientation

1988 ◽  
Vol 46 ◽  
pp. 830-831
Author(s):  
J. I. Bennetch
Keyword(s):  
Electron Beam ◽  
Analytical Techniques ◽  
Superplastic Forming ◽  
The Other ◽  
Kikuchi Pattern ◽  
Kikuchi Line ◽  
Line Analysis

In a recent study of the superplastic forming (SPF) behavior of certain Al-Li-X alloys, the relative misorientation between adjacent (sub)grains proved to be an important parameter. It is well established that the most accurate way to determine misorientation across boundaries is by Kikuchi line analysis. However, the SPF study required the characterization of a large number of (sub)grains in each sample to be statistically meaningful, a very time-consuming task even for comparatively rapid Kikuchi analytical techniques.In order to circumvent this problem, an alternate, even more rapid in-situ Kikuchi technique was devised, eliminating the need for the developing of negatives and any subsequent measurements on photographic plates. All that is required is a double tilt low backlash goniometer capable of tilting ± 45° in one axis and ± 30° in the other axis. The procedure is as follows. While viewing the microscope screen, one merely tilts the specimen until a standard recognizable reference Kikuchi pattern is centered, making sure, at the same time, that the focused electron beam remains on the (sub)grain in question.

Extensive Enteric Leiomyolysis Due to Cytomegalovirus Enterocolitis in Vertically Acquired Human Immunodeficiency Virus Infection in Infants

2000 ◽  
Vol 3 (6) ◽  
pp. 591-596 ◽  
Author(s):  
Virpi V. Smith ◽  
Amanda J. Williams ◽  
Vas Novelli ◽  
Marian Malone
Keyword(s):  
Human Immunodeficiency Virus ◽  
Vascular Endothelium ◽  
Muscularis Propria ◽  
The Other ◽  
Muscularis Mucosae ◽  
Immunodeficiency Virus ◽  
Acquired Immunodeficiency ◽  
Immunodeficiency Syndrome ◽  
Viral Inclusions

We report two infants with the acquired immunodeficiency syndrome (AIDS) and rectal bleeding due to cytomegalovirus (CMV) ileitis and colitis with minimal focal mucosal ulceration but with extensive leiomyolysis of the muscularis propria. Immunostaining and in situ hybridization for CMV showed numerous viral inclusions in the myocytes of the muscularis propria and vascular endothelium/smooth muscle with only occasional inclusions present in the muscularis mucosae. Colectomy was curative in one patient; in the other the bowel was only examined at postmortem.

scholarly journals Difficulties and modifications in the use of available methods for hydraulic conductivity measurements in highly clogged horizontal subsurface flow constructed wetlands

2017 ◽  
Vol 76 (7) ◽  
pp. 1666-1675 ◽  
Author(s):  
Mateus Pimentel Matos ◽  
André Baxter Barreto ◽  
Gabriel Rodrigues Vasconcellos ◽  
Antonio Teixeira Matos ◽  
Gustavo Ferreira Simões ◽  
...  
Keyword(s):  
Hydraulic Conductivity ◽  
Constructed Wetlands ◽  
Subsurface Flow ◽  
The Other ◽  
Good Representation ◽  
Horizontal Distance ◽  
Conductivity Measurements ◽  
Construction Time ◽  
Horizontal Subsurface Flow ◽  
Subsurface Flow Constructed Wetlands

Despite the fact that several authors consider the available measurement methods of hydraulic conductivity (ks) suitable for a good representation of the bed condition and clogging potential in horizontal subsurface flow constructed wetlands, others have questioned their adequacy. In this work, hydraulic conductivity measurements with conventional and modified methods were undertaken in two small full-scale units, one planted with cattail (Typha latifolia) and the other unplanted. Both units had already been operating for seven years and showed a high degree of clogging. It was observed that the use of the falling head method, with the introduction of the tubes during the test, provided results without a clear spatial trend. On the other hand, tests done on monitoring wells inserted during construction time showed, as expected, ks increasing with the horizontal distance from the inlet, but without reflecting actual field conditions. It was observed that, as the bed became more clogged, the use of the reported methods became more complex, suggesting the need of other methodologies. The use of planted fixed reactors (removable baskets installed in the bed) with evaluation of ks at constant head in the laboratory showed potential for the characterization of the hydrodynamic properties of the porous medium.

Did Ground Cover Change Over Geologic Time?

2000 ◽  
Vol 6 ◽  
pp. 171-182 ◽  
Author(s):  
Ben A. LePage ◽  
Hermann W. Pfefferkorn
Keyword(s):  
Fossil Record ◽  
Ground Cover ◽  
The Other ◽  
Detailed Account ◽  
Geologic Time ◽  
The Past ◽  
Other Hand ◽  
Plant Fossil

When one hears the term “ground cover,” one immediately thinks of “grasses.” This perception is so deep-seated that paleobotanists even have been overheard to proclaim that “there was no ground cover before grasses.” Today grasses are so predominant in many environments that this perception is perpetuated easily. On the other hand, it is difficult to imagine the absence or lack of ground cover prior to the mid-Tertiary. We tested the hypothesis that different forms of ground cover existed in the past against examples from the Recent and the fossil record (Table 1). The Recent data were obtained from a large number of sources including those in the ecological, horticultural, and microbiological literature. Other data were derived from our knowledge of Precambrian life, sedimentology and paleosols, and the plant fossil record, especially in situ floras and fossil “monocultures.” Some of the data are original observations, but many others are from the literature. A detailed account of these results will be presented elsewhere (Pfefferkorn and LePage, in preparation).

Reproductive performance of group-synchronized Merino d'Arles and Romanov crossbred ewes. 1. A note on the effects of lactation on fecundity

1977 ◽  
Vol 24 (1) ◽  
pp. 113-116 ◽  
Author(s):  
F. J. Galindez ◽  
M. Prud'hon ◽  
G. Reboul
Keyword(s):  
Treatment Group ◽  
Reproductive Performance ◽  
The Other ◽  
Fertility Level ◽  
Homogeneous Groups ◽  
Treatment Groups ◽  
Significant Superiority

SUMMARYFifty-six Merino d'Aries and 56 Romanov × Merino crossbred lactating ewes were divided into two treatment groups, one (T1) with a ewe-to-ram ratio of 48: 1 (24 Merino and 24 crossbred) and the other (T2) of 64: 1 (32 Merino and 32 crossbred).Intravaginal sponges with 40 mg FGA (Searle) were inserted in two subgroups at 8-day intervals and withdrawn after 12 and 16 days in situ, in four equal groups at 4-day intervals. A dose of 400 IU pregnant mare's serum gonadotrophin (PMSG) was applied at sponge withdrawal.Fertility after two oestrous cycles was equally satisfactory in both treatments, though it was lower in treatment group T2. This could be due to the significantly low (P<0·01) number of Merino ewes raddled by the T2 ram (0·33 Merino against 0·92 crossbred) suggesting preferential behaviour by the ram in this treatment.Comparisons between breeds show a slight superiority in the fertility of crossbred ewes and a highly significant superiority in prolificacy These results suggest that using the described method, 2% of rams seems more than adequate to mate with progestagen-synchronized ewes with a satisfactory fertility level. It is, however, recommended to use homogeneous groups of ewes.

The contribution of friction stress to the creep behaviour of the nickel-base in situ composite, γ—γ'-Cr 3 C 2

1980 ◽  
Vol 373 (1752) ◽  
pp. 93-109 ◽  
Keyword(s):  
Activation Energy ◽  
Creep Behaviour ◽  
Friction Stress ◽  
Matrix Alloy ◽  
Dislocation Motion ◽  
Self Diffusion ◽  
The Matrix ◽  
Nickel Base ◽  
Distribution Of Stress

Transient creep following stress reductions has been analysed by the method described by McLean (1980) to determine the friction stress σ 0 as a function of temperature and directional solidification conditions for the γ-γ'-Cr 3 Cr 2 in-situ composite and for the γ-γ' matrix alloy. These values of σ 0 are identical to the flow stresses at creep strain rates and can be identified with the sums of the barriers to dislocation motion through the matrix by climb around γ'-particles and Orowan bowing between the carbide fibres. The friction stress and the kinetics of deformation of the composite are determined by the matrix behaviour, whereas its creep strength depends on the distribution of stress between fibre and matrix. When the steady-state creep behaviour of γ-γ'-Cr 3 C 2 is analysed by using the usual power law description in terms of the effective stress σ — σ 0 , rather than the applied stress σ, the stress exponent is ca 4 and the activation energy is similar to the activation energy of self-diffusion for nickel. The results provide strong evidence for the operation of recovery-creep in both the composite and matrix alloys.

PHASE TRANSITION IN LAYERED PEROVSKITE LIKE MANGANATE Ca3Mn2O7 UNDER HIGH PRESSURE

2001 ◽  
Vol 15 (18) ◽  
pp. 2491-2497 ◽  
Author(s):  
J. L. ZHU ◽  
L. C. CHEN ◽  
R. C. YU ◽  
F. Y. LI ◽  
J. LIU ◽  
...  
Keyword(s):  
Crystal Structure ◽  
High Pressure ◽  
Diamond Anvil Cell ◽  
The Other ◽  
Layered Perovskite ◽  
X Ray Diffraction ◽  
Two Phase ◽  
X Ray ◽  
Diamond Anvil

In situ high pressure energy dispersive X-ray diffraction measurements on layered perovskite-like manganate Ca 3 Mn 2 O 7 under pressures up to 35 GPa have been performed by using diamond anvil cell with synchrotron radiation. The results show that the structure of layered perovskite-like manganate Ca 3 Mn 2 O 7 is unstable under pressure due to the easy compression of NaCl-type blocks. The structure of Ca 3 Mn 2 O 7 underwent two phase transitions under pressures in the range of 0~35 GPa. One was at about 1.3 GPa with the crystal structure changing from tetragonal to orthorhombic. The other was at about 9.5 GPa with the crystal structure changing from orthorhombic back to another tetragonal.

Approaches to Cyclopropa-Fused Quinones. The Synthesis and Photolysis of Some 4,9-Disubstituted 3,3-Dimethyl-3H-benz[f]indazoles

2003 ◽  
Vol 56 (9) ◽  
pp. 903 ◽  
Author(s):  
Gavin E. Collis ◽  
Dieter Wege
Keyword(s):  
Low Temperature ◽  
Functional Group ◽  
Alkoxy Group ◽  
The Other ◽  
Acetoxy Group

Addition of 2-diazopropane to 1,4-naphthoquinone at low temperature, followed by in situ enolization and acetylation or silylation gave 3,3-dimethyl-1H-benz[f]indazol-4,9-diyl diacetate and 3,3-dimethyl-9-(t-butyl-dimethylsilyloxy)-1H-benz[f]indazol-4-ol, respectively. Functional group manipulation of the latter compound provided a number of other 4,9-disubstituted 3,3-dimethyl-3H-benz[f]indazoles. Irradiation of the diacetate led to clean extrusion of nitrogen to give the naphtho[b]cycloproparene and an alkene. Attempts to elaborate the cycloproparene into the derived cyclopropanaphthoquinone were unsuccessful. Of the other 4,9-disubstituted 3,3-dimethyl-3H-benz[f]indazoles examined, only the compound possessing an acetoxy group at C9 was photoactive, and afforded the expected cycloproparene and alkene. Compounds bearing a hydroxy or alkoxy group at C9 were photochemically inert.

Sign in / Sign up

Export Citation Format

Share Document