Surface Treatment of the Glass Fibers in Low Pressure Microvave Plasma

1983 ◽  
Vol 30 ◽  
Author(s):  
Ryszard Parosa
Keyword(s):  
Microwave Power ◽  
Industrial Application ◽  
Treatment Time ◽  
Plasma Reactor ◽  
Glass Fibers ◽  
Process Conditions ◽  
Plasma Region ◽  
Optimal Process ◽  
Driving System ◽  
Air Plasmas

ABSTRACTIn the method described here, oxygen and air plasmas were generated at pressure of 1 – 10 Torr in quartz tube placed inside various kinds of microwave cavieties. Cavieties were supplied by 10 to 500 W of microwave power / f=2.45 GHz /. Processed fiber was fastly moved across the plasma region by special driving system. Experimentally the optimal process conditions, i.e. treatment time and gas pressure, were found. Moreover, a special construction of a “long” plasma reactor for industrial application of the process was worked out.

Study on the Chemical Modification Process of Jute Fiber

TAPPI Journal ◽  
2010 ◽  
Vol 9 (2) ◽  
pp. 23-29 ◽  
Author(s):  
Wei-ming Wang ◽  
Zai-sheng Cai ◽  
Jian-yong Yu
Keyword(s):  
Sodium Hydroxide ◽  
Sodium Silicate ◽  
Treatment Time ◽  
Jute Fiber ◽  
Process Conditions ◽  
Silicate Concentration ◽  
Sodium Hydroxide Concentration ◽  
Liquor Ratio ◽  
Degumming Process ◽  
Selection Of

Degumming of pre-chlorite treated jute fiber was studied in this paper. The effects of sodium hydroxide concentration, treatment time, temperature, sodium silicate concentration, fiber-to-liquor ratio, penetrating agent TF-107B concentration, and degumming agent TF-125A concentration were the process conditions examined. With respect to gum decomposition, fineness and mechanical properties, sodium hydroxide concentration, sodium silicate concentration, and treatment time were found to be the most important parameters. An orthogonal L9(34) experiment designed to optimize the conditions for degumming resulted in the selection of the following procedure: sodium hydroxide of 12g/L, sodium silicate of 3g/L, TF-107B of 2g/L, TF-125A of 2g/L, treatment time of 105 min, temperature of 100°C and fiber to liquor ratio of 1:20. The effect of the above degumming process on the removal of impurities was also examined and the results showed that degumming was an effective method for removing impurities, especially hemicellulose.

Study on Extracting Potassium from Potassium Feldspar with Molten Salt Leaching Method

2012 ◽  
Vol 524-527 ◽  
pp. 1078-1081
Author(s):  
Jian Guo Song ◽  
Xin Zhi Wang ◽  
Shao Dan Xiao ◽  
Wei Liu
Keyword(s):  
Reaction Time ◽  
Molten Salt ◽  
Potassium Feldspar ◽  
Process Conditions ◽  
Temperature Reaction ◽  
Optimal Process ◽  
Potash Feldspar ◽  
Salt Leaching ◽  
Effects Of Temperature

This article aims to study the technology of extracting potassium from potassium feldspar with molten salt leaching method and to analyze the effects of temperature, reaction time and other factors on extracting potassium, concluding the optimal process conditions of extracting potassium with molten leaching method from potash feldspar.

scholarly journals Degradation of Landfill Leachate Using UV-TiO2 Photocatalysis Combination with Aged Waste Reactors

Processes ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 946
Author(s):  
Chunlian Wang ◽  
Xiaojie Sun ◽  
Huijun Shan ◽  
Hongxia Zhang ◽  
Beidou Xi
Keyword(s):  
Tio2 Nanoparticles ◽  
Landfill Leachate ◽  
Control Method ◽  
Irradiation Time ◽  
Combined Treatment ◽  
Oxygen Demand ◽  
Infrared Spectrometry ◽  
Process Conditions ◽  
Optimal Process ◽  
Removal Rates

This study explored the performance of TiO2 nanoparticles in combination with aged waste reactors to treat landfill leachate. The optimum conditions for synthesis of TiO2 were determined by a series of characterizations and removal rates of methyl orange. The effect of the ultraviolet irradiation time, amount of the catalyst, and pH on the removal efficiency for the chemical oxygen demand (COD) and color in the leachate was explored to determine the optimal process conditions, which were 500 min, 4 g/L and 8.88, respectively. The removal rates for COD and chroma under three optimal conditions were obtained by the single factor control method: 89% and 70%; 95.56% and 70%; and 85% and 87.5%, respectively. Under optimal process conditions, the overall average removal rates for ammonium nitrogen (NH4+–N) and COD in the leachate for the combination of TiO2 nanoparticles and an aged waste reactor were 98.8% and 32.5%, respectively, and the nitrate (NO3−–N) and nitrite nitrogen (NO2–N) concentrations were maintained at 7–9 and 0.01–0.017 mg/L, respectively. TiO2 nanoparticles before and after the photocatalytic reaction were characterized by emission scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction, and Fourier transform infrared spectrometry. In addition, TiO2 nanoparticles have excellent recyclability, showing the potential of the photocatalytic/biological combined treatment of landfill leachate. This simulation of photocatalysis-landfilling could be a baseline study for the implementation of technology at the pilot scale.

scholarly journals Equilibrium modeling of mono and binary sorption of Cu(II) and Zn(II) onto chitosan gel beads

2016 ◽  
Vol 37 (4) ◽  
pp. 485-501 ◽  
Author(s):  
Józef Nastaj ◽  
Małgorzata Tuligłowicz ◽  
Konrad Witkiewicz
Keyword(s):  
Metal Ion ◽  
Ph Value ◽  
Experimental Studies ◽  
Process Conditions ◽  
Optimal Process ◽  
Sorption Data ◽  
Gel Beads ◽  
Two Component ◽  
Equilibrium Data ◽  
Chitosan Gel

Abstract The objective of the work are in-depth experimental studies of Cu(II) and Zn(II) ion removal on chitosan gel beads from both one- and two-component water solutions at the temperature of 303 K. The optimal process conditions such as: pH value, dose of sorbent and contact time were determined. Based on the optimal process conditions, equilibrium and kinetic studies were carried out. The maximum sorption capacities equaled: 191.25 mg/g and 142.88 mg/g for Cu(II) and Zn(II) ions respectively, when the sorbent dose was 10 g/L and the pH of a solution was 5.0 for both heavy metal ions. One-component sorption equilibrium data were successfully presented for six of the most useful three-parameter equilibrium models: Langmuir-Freundlich, Redlich-Peterson, Sips, Koble-Corrigan, Hill and Toth. Extended forms of Langmuir-Freundlich, Koble-Corrigan and Sips models were also well fitted to the two-component equilibrium data obtained for different ratios of concentrations of Cu(II) and Zn(II) ions (1:1, 1:2, 2:1). Experimental sorption data were described by two kinetic models of the pseudo-first and pseudo-second order. Furthermore, an attempt to explain the mechanisms of the divalent metal ion sorption process on chitosan gel beads was undertaken.

scholarly journals Study on Aqueous Enzymatic Extraction Process of Common Pistache Oil

2021 ◽  
Vol 251 ◽  
pp. 02058
Author(s):  
Feng Xuehua ◽  
Tao Ali ◽  
Song Zurong ◽  
Gong Panpan
Keyword(s):  
Ph Value ◽  
Orthogonal Experiment ◽  
Extraction Process ◽  
Optimal Time ◽  
Process Conditions ◽  
Optimal Process ◽  
Enzymatic Extraction ◽  
Hydrolysis Time ◽  
Aqueous Enzymatic Extraction ◽  
The Common

The aqueous enzymatic method was applied to extract the common pistache oil and the optimal extraction process conditions were identified. By observing the effect of enzymatic hydrolysis time, pH value, temperature on aqueous enzymatic extraction process and performing the orthogonal experiment based on the single factor test, the optimal process parameters were obtained, namely, the optimal time, temperature, and pH value were respectively 3 h, 50℃, and 7 with a final extraction rate of 25.38 %.

scholarly journals Development of a Laboratory-Scale Thermal-Arc-Plasma Reactor and its Application in the Pyrolysis of Petroleum Oily Sludge

2020 ◽  
Vol 2 (1) ◽  
pp. 15-27
Author(s):  
Abubakar M. Ali ◽  
Mohd A. Abu-Hassan ◽  
Raja R.K. Ibrahim ◽  
Bala I. Abdulkarim
Keyword(s):  
Flue Gas ◽  
Gas Flow ◽  
Waste Treatment ◽  
Treatment Time ◽  
Plasma Reactor ◽  
Pilot Scale ◽  
Oily Sludge ◽  
Arc Plasma ◽  
Plasma Arc ◽  
Mass Reduction

Waste treatment using thermal arc plasma is well established and laboratory/pilot scale plasma reactors were developed and their performances for the destruction of different hazardous wastes, other than petroleum oily sludge, were studied. This work aims to extend the plasma technology to the pyrolysis of hazardous petroleum oily sludge. A 4.7 kW thermal arc plasma reactor was developed using a standard TIG arc welding torch. The transferred arc plasma reactor was used to treat 20 g/batch of petroleum oily sludge. The prevailing temperature inside the reactor ranges between 356 – 1694 oC. The plasma arc temperature increased with increasing plasma arc current and also with increasing plasma gas flow-rate. A vitreous slag and a flue gas were generated as products. A mass reduction of between 36.87 – 91.40% and a TOC reduction of 21.47 – 93.76% were achieved in the treatment time of 2 – 5 min. The mass reduction was observed to increase with treatment time. However, the increase was more rapid between the 3rd and the 4th min of the treatment. The flue gas produced contains H2 (43.79 – 50.97 mol%), H2O (26.60 – 30.22 mol%), CO (8.45 – 11.18 mol%), CO2 (5.12 – 10.35 mol%), CH4 (2.17 – 3.38 mol%), C2H2 (0.86 – 2.69 mol%) and C2H4 (0.76 – 2.17 mol%). Thus, the thermal plasma reactor provides a suitable method of treating petroleum oily sludge.

An enhanced composting process with bioaugmentation: Mathematical modelling and process optimization

2021 ◽  
pp. 0734242X2110337
Author(s):  
Tea Sokač ◽  
Anita Šalić ◽  
Dajana Kučić Grgić ◽  
Monika Šabić Runjavec ◽  
Marijana Vidaković ◽  
...  
Keyword(s):  
Mathematical Model ◽  
Model Simulation ◽  
Process Conditions ◽  
Air Flow Rate ◽  
Optimal Process ◽  
Composting Process ◽  
Different Types ◽  
Adiabatic Reactor ◽  
The Mathematical Model ◽  
Good Agreement

In this paper, two different types of biowaste composting processes were carried out – composting without and with bioaugmentation. All experiments were performed in an adiabatic reactor for 14 days. Composting enhanced with bioaugmentation was the better choice because the thermophilic phase was achieved earlier, making the composting time shorter. Additionally, a higher conversion of substrate (amount of substrate consumed) was also noticed in the process enhanced by bioaugmentation. A mathematical model was developed and process parameters were estimated in order to optimize the composting process. Based on good agreement between experimental data and the mathematical model simulation results, a three-level-four-factor Box-Behnken experimental design was employed to define the optimal process conditions for further studies. It was found that the air flow rate and the mass fraction of the substrate have the most significant effect on the composting process. An improvement of the composting process was achieved after altering the mentioned variables, resulting in shorter composting time and higher conversion of the substrate.

Sign in / Sign up

Export Citation Format

Share Document