Transformations and Hydrogen Storage in Ball-Milled Iron-Titanium

1992 ◽  
Vol 286 ◽  
Author(s):  
P. Tessier ◽  
L. Zaluski ◽  
Z.-H. Yan ◽  
M.L. Trudeau ◽  
R. Bormann ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Grain Size ◽  
Hydrogen Absorption ◽  
Contamination Level ◽  
Activation Process ◽  
Equiatomic Composition ◽  
Absorption Properties ◽  
Transmission Electron ◽  
Nanocrystalline And Amorphous

ABSTRACTNanocrystalline and amorphous Fe-Ti at or close to the equiatomic composition have been prepared by ball milling, starting either from the elemental components or from the pre-melted intermetallic. The final structure, whose evolution has been monitored by Xray diffraction and transmission electron microscopy, is found to be critically dependent on milling conditions and contamination level.Hydrogen absorption properties of both the amorphous and nanocrystalline alloys have been investigated. These properties are substantially modified by the reduction in grain size. We will also discuss the influence of the activation process and repeated hydrogen charging on substitutional disorder and grain size.

Surface modification effects of graphite for selective hydrogen absorption by titanium at room temperature

2020 ◽  
Vol 56 (53) ◽  
pp. 7237-7240
Author(s):  
Keita Shinzato ◽  
Yuki Nakagawa ◽  
So Hamamoto ◽  
Yuya Hayashi ◽  
Hiroki Miyaoka ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Raman Spectroscopy ◽  
Surface Modification ◽  
Organic Solvents ◽  
Hydrogen Absorption ◽  
Room Temperature ◽  
Absorption Properties ◽  
Transmission Electron

Surface modification effects of graphite and organic solvents on Ti were investigated by thermogravimetry (TG), Raman spectroscopy, and transmission electron microscopy (TEM) observations to improve its hydrogen absorption properties.

scholarly journals The Domain and Microstructure of Resin-Bonded Magnets

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2849
Author(s):  
Marcin Jan Dośpiał
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Grain Size ◽  
Size Distribution ◽  
Domain Structure ◽  
Grain Size Distribution ◽  
Exchange Interactions ◽  
Force Microscopy ◽  
Transmission Electron ◽  
Scanning Electron

This paper presents domain and structure studies of bonded magnets made from nanocrystalline Nd-(Fe, Co)-B powder. The structure studies were investigated using scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), Mössbauer spectroscopy and X-ray diffractometry. On the basis of performed qualitative and quantitative phase composition studies, it was found that investigated alloy was mainly composed of Nd2(Fe-Co)14B hard magnetic phase (98 vol%) and a small amount of Nd1.1Fe4B4 paramagnetic phase (2 vol%). The best fit of grain size distribution was achieved for the lognormal function. The mean grain size determined from transmission electron microscopy (TEM) images on the basis of grain size distribution and diffraction pattern using the Bragg equation was about ≈130 nm. HRTEM images showed that over-stoichiometric Nd was mainly distributed on the grain boundaries as a thin amorphous border of 2 nm in width. The domain structure was investigated using a scanning electron microscope and metallographic light microscope, respectively, by Bitter and Kerr methods, and by magnetic force microscopy. Domain structure studies revealed that the observed domain structure had a labyrinth shape, which is typically observed in magnets, where strong exchange interactions between grains are present. The analysis of the domain structure in different states of magnetization revealed the dynamics of the reversal magnetization process.

Tem Study of Yielding in Polycrystalline Gold Thin Films

1997 ◽  
Vol 505 ◽  
Author(s):  
Kwame Owusu-Boahen ◽  
Alexander H. King
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Grain Size ◽  
Rock Salt ◽  
Gold Films ◽  
Plastic Yielding ◽  
Transmission Electron ◽  
Mean Grain Size ◽  
Polycrystalline Gold ◽  
Individual Grains

ABSTRACTWe have used transmission electron microscopy (TEM) to study the microstructure of thin gold films which were grown on 〈100〉 rock salt. The samples were annealed on the rock salt substrate or on a gold TEM specimen grid. Films annealed on rock salt had a larger mean grain size than those annealed on TEM grids. All of the annealed films have a 〈111〉 preferred orientation. Several cracks are observed in the film annealed on rock salt. Plastic yielding of the film was identified by the presence of dislocations, and is caused by tensile stress derived from grain growth. In spite of the uniform texture of the films, the observed dislocations were concentrated only in some individual grains, while their surrounding grains remained dislocation-free. Yielded grains showed no difference of orientation that would lead to higher Schmid factors, so other predictors of yielding must be considered.

The effect of grain size on microstructure and stress relaxation in polycrystalline Y1Ba2Cu3O7−δ

1989 ◽  
Vol 4 (2) ◽  
pp. 248-256 ◽  
Author(s):  
T. M. Shaw ◽  
S. L. Shinde ◽  
D. Dimos ◽  
R. F. Cook ◽  
P. R. Duncombe ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Heat Treatment ◽  
Transmission Electron Microscopy ◽  
Grain Size ◽  
Stress Relaxation ◽  
Optical Microscopy ◽  
Slow Cooling ◽  
Hierarchical Arrangement ◽  
Transmission Electron ◽  
Processing Variables

We have used transmission electron microscopy and optical microscopy to examine the effect that grain size and heat treatment have on twinning and microcracking in polycrystalline Y1Ba2Cu3O7−δ. It is shown that isothermal oxygenation heat treatments produce twin structures consisting of parallel twins, with a characteristic spacing that increases with increasing grain size. Slow cooling through the temperature range where the orthorhombic-to-tetragonal transformation induces twinning, however, produces a structure consisting of a hierarchical arrangement of intersecting twins, the scale of which appears to be independent of grain size. It is also shown that the microcracking induced by anisotropic changes in grain dimensions on cooling or during oxygenation can be suppressed if the grain size of the material is kept below about 1 μm. The results are examined in the light of current models for transformation twinning and microcracking and the models used to access the effect other processing variables such as oxygen content, doping or heat treatment may have on the microstructure of Y1Ba2Cu3O7−δ.

Combined effect of grain size and tensile stresses on the ferroelectric properties of sol-gel (Pb,La)TiO3 thin films

1999 ◽  
Vol 14 (12) ◽  
pp. 4570-4580 ◽  
Author(s):  
M. Alguerá ◽  
M. L. Calzada ◽  
L. Pardo ◽  
E. Snoeck
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Grain Size ◽  
Lead Titanate ◽  
Ferroelectric Properties ◽  
Sol Gel ◽  
Precursor Solution ◽  
Grain Size Effect ◽  
Transmission Electron ◽  
Switchable Polarization

Transmission electron microscopy has shown that the grain size of sol-gel-prepared lanthanum-modified lead titanate films increases from ∼100 to ∼1 μm when the excess of PbO in the precursor solution is reduced from 20 to 10 mol%. Switchable polarization is higher in the films with a smaller grain size. Profilometry and the temperature dependence of the dielectric permittivity indicate that films are tensile stressed by the substrate. The grain-size effect on polarization switching is explainedby taking into account this tensile stress, which is thought to induce some a-domain orientation and 90° domain wall clamping in the grains attached to the substrate.

TEM Study of FePt and FePt:C/FePt Composite Double-Layered Thin Films

2013 ◽  
Vol 275-277 ◽  
pp. 1952-1955
Author(s):  
Ling Fang Jin ◽  
Xing Zhong Li
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Transmission Electron Microscopy ◽  
Grain Size ◽  
Magnetic Properties ◽  
Composite Layer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron

New functional nanocomposite FePt:C thin films with FePt underlayers were synthesized by noneptaxial growth. The effect of the FePt layer on the ordering, orientation and magnetic properties of the composite layer has been investigated by adjusting FePt underlayer thickness from 2 nm to 14 nm. Transmission electron microscopy (TEM), together with x-ray diffraction (XRD), has been used to check the growth of the double-layered films and to study the microstructure, including the grain size, shape, orientation and distribution. XRD scans reveal that the orientation of the films was dependent on FePt underlayer thickness. In this paper, the TEM studies of both single-layered nonepitaxially grown FePt and FePt:C composite L10 phase and double-layered deposition FePt:C/FePt are presented.

Synthesis and Characterization of Plasma Synthesized Nanostructured Magnesia-Yttria Based Nanocomposites

2007 ◽  
Vol 1056 ◽  
Author(s):  
Jafar F. Al-Sharab ◽  
Rajendra Sadangi ◽  
Vijay Shukla ◽  
Bernard Kear
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Grain Size ◽  
Chemical Mapping ◽  
X Ray Diffraction ◽  
Fine Grained ◽  
Transmission Electron ◽  
Spray Method ◽  
Average Grain Size

ABSTRACTPolycrystalline Y2O3 is the material of choice for IR windows since it has excellent optical properties in the visible, and near infra-red band. However, current processing methods yield polycrystalline Y2O3 with large grain size (> 100 μm), which limits the hardness and erosion resistance attainable. One way to improve strength is to develop an ultra-fine grained material with acceptable optical transmission properties. To realize a fine-grained ceramic, one approach is to develop a composite structure, in which one phase inhibits the growth of the other phase during processing. In this study, Y2O3-MgO nanocomposite with various MgO content (20, 50 and 80 mol%) were synthesized using plasma spray method. Extensive characterization techniques including x-ray diffraction, scanning electron microscopy (SEM), Transmission electron microscopy (TEM) and Energy Dispersive spectrometry (EDS) were employed to study the synthesized powder as well as the consolidated sample. Transmission Electron Microscopy, as well as EDS chemical mapping, revealed that the consolidated sample have bi-continuous MgO-Y2O3 nanostructure with an average grain size of 200 nm.

Sign in / Sign up

Export Citation Format

Share Document