F-Centers and Oxygen-Interstitials in MgO

1992 ◽  
Vol 279 ◽  
Author(s):  
C. Scholz ◽  
P. Ehrhart
Keyword(s):  
Optical Absorption Spectroscopy ◽  
Assisted Migration ◽  
X Ray Diffraction ◽  
Migration Process ◽  
X Ray ◽  
Different Temperatures ◽  
Induced Defects ◽  
First Time ◽  
Irradiation Induced Defects ◽  
Cascade Damage

ABSTRACTMgO single crystals have been irradiated at different temperatures (4 K, 300 K) with electrons of energies varying between 0.3 and 3 MeV. The irradiation induced defects and their reactions during thermal annealing have been investigated by optical absorption spectroscopy and by X-ray diffraction. The relaxation volume (Viel ≈ 1 at.vol. = a3/8) and the migration energy of the interstitial atoms (≈ 1.6 eV) are determined and an ionization induced and thermally assisted migration process is observed for the first time. The relevance of these results for the understanding of the cascade damage observed after neutron- or ion-damage is discussed.

A Study of the Photoluminescence and Reflectivity Spectra of MOCVD Grown MnSe

1994 ◽  
Vol 340 ◽  
Author(s):  
M. Di Blasio ◽  
L. Aigouy ◽  
M. Averous ◽  
J. Calas ◽  
P. Tomasini ◽  
...  
Keyword(s):  
Energy Gap ◽  
Stokes Shift ◽  
Thin Layers ◽  
X Ray Diffraction ◽  
X Ray ◽  
Zinc Blende ◽  
Reflectivity Spectra ◽  
Different Temperatures ◽  
First Time ◽  
Zinc Blende Structure

Photoluminescence (PL) experiments at 2K are performed on MOCVD grown MnSe. The precursors used in the growth stage are methylpentacarbonylmanganese and diethylselenide. Pyrolysis of the percursors is realized inside a gradient reactor under a constant H2 flux, between 280-55°TC. The compound is epitaxially grown on various substrates (Si, InP, GaSb, GaAs, ZnTe/GaAs, etc.). On some of these samples the compound presents a zinc blende structure, while in the other samples rock salt formation has been identified. The first substrate is used because of its interest in Si technology, while the others are used because MnSe can be grown in the zinc blende phase for very thin layers. For the first time x-ray diffraction data has allowed us to determine the lattice constant of zincblende MnSe (aMnse (oct)=5.818Å), confirming the close approximation (a ∼ 5.9Å) used from the Zn1-xMnxSe alloy. These compounds have visible Mn++ transitions at 2.12-5eV; other features are also visible at 2.3-4, 2.7, and 3.0eV. The energy gap transition of tetrahedral thin film layers of MnSe is seen for the first time in PL spectra. A temperature dependant PL study is performed on MnSe in the 2-200K range. Reflectivity experiments are used to attempt to identify the internal manganese transitions. A qualitative PL analysis of the samples grown at different temperatures and on different substrates is provided. A Stokes shift is encountered when the results are compared.

Diffraction Effects from Irradiated Aluminum Single Crystals*

1962 ◽  
Vol 6 ◽  
pp. 164-171
Author(s):  
H. E. Kissinger
Keyword(s):  
Single Crystals ◽  
Crystal Surface ◽  
Irradiation Damage ◽  
X Ray Diffraction ◽  
X Ray ◽  
Integrated Intensity ◽  
Diffraction Effects ◽  
Induced Defects ◽  
Irradiation Induced Defects ◽  
Trapping Sites

AbstractThe effect of substructural perfection on the accumulation of irradiation damage in aluminum was examined. Large single crystals with extensive substructure and crystals essentially free of substructure, all with faces cut parallel to crystal planes, were subjected to neutron irradiation. Subsequent examination by X-ray diffraction revealed pronounced changes in integrated intensity and Debye-Waller temperature factor for the substructure-free crystals; these effects disappeared upon re-etching of the surface. Laue photographs showed that the normal single-crystal pattern was partially obscured by a polycrystalline effect which also disappeared upon etching. Crystals with extensive substructure showed no such effects.This diffraction evidence supports the view that irradiation-induced defects in aluminum migrate to and collect at the crystal surface if no internal trapping sites exist.

Combining mesoscale thermal transport and x-ray diffraction measurements to characterize early-stage evolution of irradiation-induced defects in ceramics

2020 ◽  
Vol 193 ◽  
pp. 61-70 ◽  
Author(s):  
Marat Khafizov ◽  
M Faisal Riyad ◽  
Yuzhou Wang ◽  
Janne Pakarinen ◽  
Lingfeng He ◽  
...  
Keyword(s):  
Thermal Transport ◽  
Early Stage ◽  
X Ray Diffraction ◽  
X Ray ◽  
Induced Defects ◽  
Irradiation Induced Defects

scholarly journals Quartz Crystallite Size and Moganite Content as Indicators of the Mineralogical Maturity of the Carboniferous Chert: The Case of Cherts from Eastern Asturias (Spain)

Minerals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 611
Author(s):  
Celia Marcos ◽  
María de Uribe-Zorita ◽  
Pedro Álvarez-Lloret ◽  
Alaa Adawy ◽  
Patricia Fernández ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Crystallite Size ◽  
Archaeological Sites ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Infrared And Raman Spectroscopy ◽  
First Time ◽  
Geological Formations

Chert samples from different coastal and inland outcrops in the Eastern Asturias (Spain) were mineralogically investigated for the first time for archaeological purposes. X-ray diffraction, X-ray fluorescence, transmission electron microscopy, infrared and Raman spectroscopy and total organic carbon techniques were used. The low content of moganite, since its detection by X-ray diffraction is practically imperceptible, and the crystallite size (over 1000 Å) of the quartz in these cherts would be indicative of its maturity and could potentially be used for dating chert-tools recovered from archaeological sites. Also, this information can constitute essential data to differentiate the cherts and compare them with those used in archaeological tools. However, neither composition nor crystallite size would allow distinguishing between coastal and inland chert outcrops belonging to the same geological formations.

scholarly journals First Report on the Geologic Occurrence of Natural Na–A Zeolite and Associated Minerals in Cretaceous Mudstones of the Paja Formation of Vélez (Santander), Colombia

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 218
Author(s):  
Carlos Alberto Ríos-Reyes ◽  
German Alfonso Reyes-Mendoza ◽  
José Antonio Henao-Martínez ◽  
Craig Williams ◽  
Alan Dyer
Keyword(s):  
Natural Zeolite ◽  
Scanning Electron Micrographs ◽  
Total Sulfur ◽  
Zeolite A ◽  
X Ray Diffraction ◽  
X Ray ◽  
Mineral Phases ◽  
The World ◽  
Porosity And Permeability ◽  
First Time

This study reports for the first time the geologic occurrence of natural zeolite A and associated minerals in mudstones from the Cretaceous Paja Formation in the urban area of the municipality of Vélez (Santander), Colombia. These rocks are mainly composed of quartz, muscovite, pyrophyllite, kaolinite and chlorite group minerals, framboidal and cubic pyrite, as well as marcasite, with minor feldspar, sulphates, and phosphates. Total organic carbon (TOC), total sulfur (TS), and millimeter fragments of algae are high, whereas few centimeters and not biodiverse small ammonite fossils, and other allochemical components are subordinated. Na–A zeolite and associated mineral phases as sodalite occur just beside the interparticle micropores (honeycomb from framboidal, cube molds, and amorphous cavities). It is facilitated by petrophysical properties alterations, due to processes of high diagenesis, temperatures up to 80–100 °C, with weathering contributions, which increase the porosity and permeability, as well as the transmissivity (fluid flow), allowing the geochemistry remobilization and/or recrystallization of pre-existing silica, muscovite, kaolinite minerals group, salts, carbonates, oxides and peroxides. X-ray diffraction analyses reveal the mineral composition of the mudstones and scanning electron micrographs show the typical cubic morphology of Na–A zeolite of approximately 0.45 mμ in particle size. Our data show that the sequence of the transformation of phases is: Poorly crystalline aluminosilicate → sodalite → Na–A zeolite. A literature review shows that this is an unusual example of the occurrence of natural zeolites in sedimentary marine rocks recognized around the world.

scholarly journals The Effect of Surfactant-Modified Montmorillonite on the Cross-Linking Efficiency of Polysiloxanes

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2623
Author(s):  
Monika Wójcik-Bania ◽  
Jakub Matusik
Keyword(s):  
Total Pore Volume ◽  
Cross Linking ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
The Cross ◽  
Chain Lengths ◽  
First Time ◽  
Substituent Influence ◽  
Benzyl Substituent

Polymer–clay mineral composites are an important class of materials with various applications in the industry. Despite interesting properties of polysiloxanes, such matrices were rarely used in combination with clay minerals. Thus, for the first time, a systematic study was designed to investigate the cross-linking efficiency of polysiloxane networks in the presence of 2 wt % of organo-montmorillonite. Montmorillonite (Mt) was intercalated with six quaternary ammonium salts of the cation structure [(CH3)2R’NR]+, where R = C12, C14, C16, and R’ = methyl or benzyl substituent. The intercalation efficiency was examined by X-ray diffraction, CHN elemental analysis, and Fourier transform infrared (FTIR) spectroscopy. Textural studies have shown that the application of freezing in liquid nitrogen and freeze-drying after the intercalation increases the specific surface area and the total pore volume of organo-Mt. The polymer matrix was a poly(methylhydrosiloxane) cross-linked with two linear vinylsiloxanes of different siloxane chain lengths between end functional groups. X-ray diffraction and transmission electron microscopy studies have shown that the increase in d-spacing of organo-Mt and the benzyl substituent influence the degree of nanofillers’ exfoliation in the nanocomposites. The increase in the degree of organo-Mt exfoliation reduces the efficiency of hydrosilylation reaction monitored by FTIR. This was due to physical hindrance induced by exfoliated Mt particles.

scholarly journals A Superhydrophobic, Antibacterial, and Durable Surface of Poplar Wood

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1885
Author(s):  
Xinyu Wu ◽  
Feng Yang ◽  
Jian Gan ◽  
Zhangqian Kong ◽  
Yan Wu
Keyword(s):  
Stearic Acid ◽  
Antibacterial Properties ◽  
Alkali Resistance ◽  
Poplar Wood ◽  
X Ray Diffraction ◽  
X Ray ◽  
Different Temperatures ◽  
Acid And Alkali Resistance ◽  
The Stability

The silver particles were grown in situ on the surface of wood by the silver mirror method and modified with stearic acid to acquire a surface with superhydrophobic and antibacterial properties. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and X-ray energy spectroscopy (XPS) were used to analyze the reaction mechanism of the modification process. Scanning electron microscopy (SEM) and contact angle tests were used to characterize the wettability and surface morphology. A coating with a micro rough structure was successfully constructed by the modification of stearic acid, which imparted superhydrophobicity and antibacterial activity to poplar wood. The stability tests were performed to discuss the stability of its hydrophobic performance. The results showed that it has good mechanical properties, acid and alkali resistance, and UV stability. The durability tests demonstrated that the coating has the function of water resistance and fouling resistance and can maintain the stability of its hydrophobic properties under different temperatures of heat treatment.

scholarly journals A novel and potentially scalable CVD-based route towards SnO2:Mo thin films as transparent conducting oxides

2021 ◽  
Author(s):  
Tianlei Ma ◽  
Marek Nikiel ◽  
Andrew G. Thomas ◽  
Mohamed Missous ◽  
David J. Lewis
Keyword(s):  
Thin Films ◽  
Photoelectron Spectroscopy ◽  
Mixed Valence ◽  
Chemical Vapour ◽  
X Ray Diffraction ◽  
X Ray ◽  
Conducting Oxides ◽  
Valence States ◽  
3 Omega ◽  
First Time

AbstractIn this report, we prepared transparent and conducting undoped and molybdenum-doped tin oxide (Mo–SnO2) thin films by aerosol-assisted chemical vapour deposition (AACVD). The relationship between the precursor concentration in the feed and in the resulting films was studied by energy-dispersive X-ray spectroscopy, suggesting that the efficiency of doping is quantitative and that this method could potentially impart exquisite control over dopant levels. All SnO2 films were in tetragonal structure as confirmed by powder X-ray diffraction measurements. X-ray photoelectron spectroscopy characterisation indicated for the first time that Mo ions were in mixed valence states of Mo(VI) and Mo(V) on the surface. Incorporation of Mo6+ resulted in the lowest resistivity of $$7.3 \times 10^{{ - 3}} \Omega \,{\text{cm}}$$ 7.3 × 10 - 3 Ω cm , compared to pure SnO2 films with resistivities of $$4.3\left( 0 \right) \times 10^{{ - 2}} \Omega \,{\text{cm}}$$ 4.3 0 × 10 - 2 Ω cm . Meanwhile, a high transmittance of 83% in the visible light range was also acquired. This work presents a comprehensive investigation into impact of Mo doping on SnO2 films synthesised by AACVD for the first time and establishes the potential for scalable deposition of SnO2:Mo thin films in TCO manufacturing. Graphical abstract

scholarly journals Reactive Dual Magnetron Sputtering: A Fast Method for Preparing Stoichiometric Microcrystalline ZnWO4 Thin Films

Surfaces ◽  
2021 ◽  
Vol 4 (2) ◽  
pp. 106-114
Author(s):  
Yannick Hermans ◽  
Faraz Mehmood ◽  
Kerstin Lakus-Wollny ◽  
Jan P. Hofmann ◽  
Thomas Mayer ◽  
...  
Keyword(s):  
Thin Films ◽  
Magnetron Sputtering ◽  
Photoelectron Spectroscopy ◽  
Fast Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Glass Substrates ◽  
Post Annealing ◽  
Rf Signal ◽  
First Time

Thin films of ZnWO4, a promising photocatalytic and scintillator material, were deposited for the first time using a reactive dual magnetron sputtering procedure. A ZnO target was operated using an RF signal, and a W target was operated using a DC signal. The power on the ZnO target was changed so that it would match the sputtering rate of the W target operated at 25 W. The effects of the process parameters were characterized using optical spectroscopy, X-ray diffraction, and scanning electron microscopy, including energy dispersive X-ray spectroscopy as well as X-ray photoelectron spectroscopy. It was found that stoichiometric microcrystalline ZnWO4 thin films could be obtained, by operating the ZnO target during the sputtering procedure at a power of 55 W and by post-annealing the resulting thin films for at least 10 h at 600 °C. As FTO coated glass substrates were used, annealing led as well to the incorporation of Na, resulting in n+ doped ZnWO4 thin films.

scholarly journals Hydrothermal Ageing and Its Effect on Fracture Load of Zirconia Dental Implants

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3103
Author(s):  
Laurent Gremillard ◽  
Agnès Mattlet ◽  
Alexandre Mathevon ◽  
Damien Fabrègue ◽  
Bruno Zberg ◽  
...  
Keyword(s):  
Dental Implants ◽  
Fracture Load ◽  
Accelerated Ageing ◽  
Dental Ceramics ◽  
X Ray Diffraction ◽  
X Ray ◽  
Dental Restorations ◽  
Different Temperatures ◽  
Mechanical Performances ◽  
Kinetics Of

Due to growing demand for metal-free dental restorations, dental ceramics, especially dental zirconia, represent an increasing share of the dental implants market. They may offer mechanical performances of the same range as titanium ones. However, their use is still restricted by a lack of confidence in their durability and, in particular, in their ability to resist hydrothermal ageing. In the present study, the ageing kinetics of commercial zirconia dental implants are characterized by X-ray diffraction after accelerated ageing in an autoclave at different temperatures, enabling their extrapolation to body temperature. Measurements of the fracture loads show no effect of hydrothermal ageing even after ageing treatments simulated a 90-year implantation.

Sign in / Sign up

Export Citation Format

Share Document