Two-Dimensional Ordering of Ion Damaged Graphite

1983 ◽  
Vol 27 ◽  
Author(s):  
B.S. Elman ◽  
S. Dresselhaus ◽  
G. Braunstein ◽  
G. Dressflhaus ◽  
T. Venkatesan ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Pyrolytic Graphite ◽  
Two Dimensional ◽  
Complementary Information ◽  
Ion Channeling ◽  
The Third ◽  
Annealing Temperatures ◽  
Transmission Electron ◽  
Post Implantation

ABSTRACTPost implantation annealing of ion-damaged, highly oriented pyrolytic graphite (HOPG) has been studied by Raman spectroscopy, the ion channeling technique and Transmission Electron Microscopy. Complementary information obtained by these methods provides confirmation for the completion of the first step of graphitization of iondamaged graphite at annealing temperatures of ~2300°C. This is manifested by the formation of carbon planes with two dimensional ordering but no correlation in the third (c-axis) dimension.

scholarly journals The Examination of Calcium ion Implanted Alumina with Energy Filtered Transmission Electron Microscopy

1997 ◽  
Vol 3 (S2) ◽  
pp. 413-414
Author(s):  
E.M. Hunt ◽  
J.M. Hampikian ◽  
N.D. Evans
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Pure Aluminum ◽  
Lattice Parameter ◽  
Face Centered Cubic ◽  
Ion Channeling ◽  
Transmission Electron ◽  
Knoop Microhardness ◽  
Aluminum Nanocrystals ◽  
Face Centered

Ion implantation can be used to alter the optical response of insulators through the formation of embedded nano-sized particles. Single crystal alumina has been implanted at ambient temperature with 50 keV Ca+ to a fluence of 5 x 1016 ions/cm2. Ion channeling, Knoop microhardness measurements, and transmission electron microscopy (TEM) indicate that the alumina surface layer was amorphized by the implant. TEM also revealed nano-sized crystals ≈7 - 8 nm in diameter as seen in Figure 1. These nanocrystals are randomly oriented, and exhibit a face-centered cubic structure (FCC) with a lattice parameter of 0.409 nm ± 0.002 nm. The similarity between this crystallography and that of pure aluminum (which is FCC with a lattice parameter of 0.404 nm) suggests that they are metallic aluminum nanocrystals with a slightly dilated lattice parameter, possibly due to the incorporation of a small amount of calcium.Energy-filtered transmission electron microscopy (EFTEM) provides an avenue by which to confirm the metallic nature of the aluminum involved in the nanocrystals.

Void Morphology In NiAl

2000 ◽  
Vol 646 ◽  
Author(s):  
M. Zakaria ◽  
P.R. Munroe
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Surface Energy ◽  
Annealing Temperature ◽  
Void Formation ◽  
Dislocation Climb ◽  
Annealing Temperatures ◽  
Relative Incidence ◽  
Transmission Electron ◽  
Void Shape

ABSTRACTVoid formation in stoichiometric NiAl was studied through controlled heat treatments and transmission electron microscopy. Voids formed at temperatures as low as 400°C, but dissolved during annealing at 900°C. Both cuboidal and rhombic dodecahedral voids were observed, often at the same annealing temperature. At higher annealing temperatures (>800°C) extensive dislocation climb was noted. The relative incidence of void formation and dislocation climb can be related to the mobility of vacancies at each annealing temperature. Further, differences in void shape can be described in terms of their relative surface energy and mode of nucleation.

CoSi2 Precipitate Coarsening During Formation of Buried Epitaxial Cosi2 Layers By Ion Beam Synthesis

1990 ◽  
Vol 201 ◽  
Author(s):  
R. Jebasinski ◽  
S. Mantl ◽  
K. Radermacher ◽  
P. Fichtner ◽  
W. Jăger ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Activation Energy ◽  
Transmission Electron Microscopy ◽  
Cross Section ◽  
Microstructural Evolution ◽  
Annealing Temperature ◽  
Ion Beam ◽  
Precipitate Coarsening ◽  
Annealing Temperatures ◽  
Transmission Electron

AbstractThe coarsening of CoSi2 precipitates and the microstructural evolution of (111) Si implanted with 200 keV Co+ ions at 350°C and fluences of 1×1016cm−2 and 6×1016cm−2 were investigated as a function of depth, annealing temperature and annealing time using Rutherford Backscattering Spectroscopy (RBS) and Transmission Electron Microscopy (TEM). After annealing cross-section TEM micrographs show a layered array of platelet-shaped precipitates with preferred facets on {111} planes. The fraction of Co-atoms, that were redistributed during the different annealing temperatures and times, has been used to determine an activation energy for the precipitate coarsening. By applying the Meechan-Brinkman and the change-of-slope methods, we obtained activation energies in the range of 3.2 – 3.6 eV.

scholarly journals Designing Magnetic Layered Double Hydroxides and Two-Dimensional Magnetic Nano-Nets of Cobalt Ferrite through a Novel Approach

2018 ◽  
Vol 8 (11) ◽  
pp. 2099 ◽  
Author(s):  
Osama Saber ◽  
Abdullah Aljaafari ◽  
Sarah Asiri ◽  
Khalid Batoo
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Layered Double Hydroxides ◽  
Cobalt Ferrite ◽  
High Coercivity ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Double Hydroxides

The present study has a dual aim of supporting magnetic nanoparticles over the nanolayers of LDHs and designing two-dimensional magnetic nano-nets of cobalt ferrite. In this trend, nanoparticles of CoFe2O4 were prepared and supported by Co-Fe LDH through urea hydrolysis. The nanolayered structures of Co-Fe LDH were confirmed by X-ray diffraction, energy-dispersive X-ray spectrometry, FT-IR spectra, thermal analyses, and transmission electron microscopy. In addition, they indicated that 13.2% CoFe2O4 were supported over Co-Fe LDH. Transformation of the nanolayered structures of Co-Fe LDH to nano-nets was achieved by the catalytic effect of the supported CoFe2O4 nanoparticles through solvent thermal technique. X-ray diffraction patterns and transmission electron microscopy images confirmed the transformation of the supported Co-Fe LDH to nano-nets of cobalt ferrite. In order to indicate the effect of the LDH for designing the nano-nets, nanoparticles of cobalt ferrite were prepared by the same technique without LDH. The magnetic behavior of the nano-nets and the supported Co-Fe LDH were measured and compared with the nanoparticles through vibrating sample magnetometer technique. The magnetic parameters indicated that the prepared nano-nets have ferromagnetic behavior and high coercivity. However, the prepared nanoparticles revealed a superparamagnetic state and low coercivity. The experimental results concluded that the incorporation of nanoparticles with nanowires into nano-net structures has been found to be an efficient way to improve their magnetic properties and prevent their agglomerations. Finally, layered double hydroxides are an important source for constructing magnetic nanolayered structures and nano-nets.

Formation of Nanovoids and Nanocolumns in High Dose Hydrogen Implanted ZnO Bulk Crystals

2006 ◽  
Vol 957 ◽  
Author(s):  
Rajendra Singh ◽  
R. Scholz ◽  
U. Gösele ◽  
S. H. Christiansen
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Dose ◽  
Hydrogen Ions ◽  
Bulk Crystals ◽  
Cross Sectional ◽  
Projected Range ◽  
Transmission Electron ◽  
Wafer Surfaces ◽  
Post Implantation

ABSTRACTZnO(0001) bulk crystals were implanted with 100 keV H2+ ions with various doses in the range of 5×1016 to 3×1017 cm-2. The ZnO crystals implanted up to a dose of 2.2×1017 cm-2 did not show any surface exfoliation, even after post-implantation annealing at temperatures up to 800°C for 1 h while those crystals implanted with a dose of 2.8×1017 cm-2 or higher exhibited exfoliated surfaces already in the as-implanted state. In a narrow dose window in between, controlled exfoliation could be obtained upon post-implantation annealing only. Cross-sectional transmission electron microscopy (XTEM) of the implanted ZnO samples showed that a large number of nanovoids were formed within the implantation-induced damage band. These nanovoids served as precursors for the formation of microcracks leading to the exfoliation of ZnO wafer surfaces. In addition to the nanovoids, elongated nanocolumns perpendicular to the ZnO wafer surfaces were also observed. These nanocolumns showed diameters of up to 10 nm and lengths of up to 500 nm. The nanocolumns were found in the ZnO wafer even well beyond the projected range of hydrogen ions.

Sign in / Sign up

Export Citation Format

Share Document