Shape Memory Effect with Low Ms Thermoelastic thin Plate Martensite in an FE-33Ni-12CO-5Ti Alloy

1991 ◽  
Vol 246 ◽  
Author(s):  
Li Jian ◽  
C. C. Chou ◽  
C. M. Wayman
Keyword(s):  
Martensitic Transformation ◽  
Shape Memory ◽  
Liquid Nitrogen ◽  
Shape Memory Effect ◽  
Memory Effect ◽  
Thin Plate ◽  
Electrical Resistance ◽  
Plate Martensite ◽  
Electrical Resistance Measurements

AbstractAn Fe-33Ni-12Co-5Ti (wt.%) alloy was subjected to aging treatments to determine the effect of ausaging (at 700 °C for 5, 10 and 30 hr) on the martensitic transformation and shape memory effect. The Ms temperatures were determined by electrical resistance measurements and microstructures were examined by TEM. The shape memory was studied by bending specimens in liquid nitrogen and found to be associated with a low Ms thermoelastic thin plate martensite.

Martensitic transformation, ductility, and shape-memory effect of polycrystalline Ni56Mn25 –xFexGa19alloys

2005 ◽  
Vol 96 (8) ◽  
pp. 843-846 ◽  
Author(s):  
Yunqing Ma ◽  
Lihong Xu ◽  
Yan Li ◽  
Chengbao Jiang ◽  
Huibin Xu ◽  
...  
Keyword(s):  
Martensitic Transformation ◽  
Shape Memory ◽  
Shape Memory Effect ◽  
Memory Effect

scholarly journals Fabrication and Shape Memory Characteristics of Highly Porous Ti-Nb-Mo Biomaterials

2017 ◽  
Vol 62 (2) ◽  
pp. 1367-1370 ◽  
Author(s):  
Y.-W. Kim ◽  
T.W. Mukarati
Keyword(s):  
Martensitic Transformation ◽  
Shape Memory ◽  
Shape Memory Effect ◽  
Memory Effect ◽  
Differential Scanning Calorimetric ◽  
Porous Scaffolds ◽  
High Porosity ◽  
Porous Ti ◽  
Human Body Temperature ◽  
Rapidly Solidified

AbstractNon-toxic Ti-Nb-Mo scaffolds were fabricated by sintering rapidly solidified alloy fibers for biomedical applications. Microstructure and martensitic transformation behaviors of the porous scaffolds were investigated by means of differential scanning calorimetric and X-ray diffraction. Theα″–βtransformation occurs in the as-solidified fiber and the sintered scaffolds. According to the compressive test of the sintered scaffolds with 75% porosity, they exhibit good superelasticity and strain recovery ascribed to the stress-induced martensitic transformation and the shape memory effect. Because of the high porosity of the scaffolds, an elastic modulus of 1.4 GPa, which matches well with that of cancellous bone, could be obtained. The austenite transformation finishing temperature of 77Ti-18Nb-5Mo alloy scaffolds is 5.1°C which is well below the human body temperature, and then all mechanical properties and shape memory effect of the porous 77Ti-18Nb-5Mo scaffolds are applicable for bon replacement implants.

scholarly journals Effect of Thermomechanical Cycling on Martensitic Transformation and Shape Memory Effect in 304 Austenitic Steel

Metals ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 901
Author(s):  
Jie Chen ◽  
Yonghao Zhang ◽  
Jiqiang Ge ◽  
Huabei Peng ◽  
Shuke Huang ◽  
...  
Keyword(s):  
Martensitic Transformation ◽  
Shape Memory ◽  
Austenitic Steel ◽  
Shape Memory Effect ◽  
Memory Effect ◽  
Annealing Temperature ◽  
Cycle Number ◽  
Thermomechanical Cycling ◽  
Ε Martensite ◽  
Optimum Annealing Temperature

To improve the shape memory effect (SME) of 304 austenitic steel effectively and efficiently, thermomechanical cycling, comprising deformation at room temperature and annealing, was applied. The influences of cycle number and annealing temperature on the SME and microstructures in 304 austenitic steel were investigated by light microscope (LM), X-ray diffraction (XRD), and transmission electron microscope (TEM). The shape recovery ratio was remarkably improved from 16% to 40% after two thermomechanical cycles. The optimum annealing temperature was 833 K in the process of thermomechanical cycling. The improved SME by thermomechanical cycling was mainly related to stress-induced ε martensite rather than stress-induced α’ martensite. The reason is that thermomechanical cycling can not only promote the occurrence of the stress-induced γ→ε martensitic transformation, but also suppress the subsequently stress-induced ε→α′ transformation.

scholarly journals The Effect of Subsequent Stress-Induced Martensite Aging on the Viscoelastic Properties of Aged NiTiHf Polycrystals

Metals ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1890
Author(s):  
Anton I. Tagiltsev ◽  
Elena Y. Panchenko ◽  
Ekaterina E. Timofeeva ◽  
Yuriy I. Chumlyakov ◽  
Ekaterina S. Marchenko ◽  
...  
Keyword(s):  
Elastic Modulus ◽  
Martensitic Transformation ◽  
Internal Friction ◽  
Shape Memory ◽  
Shape Memory Effect ◽  
Memory Effect ◽  
Viscoelastic Properties ◽  
Oriented Growth ◽  
Compressive Stresses ◽  
Significant Change

This study investigated the effect of stress-induced martensite aging under tensile and compressive stresses on the functional and viscoelastic properties in Ni50.3Ti32.2Hf17.5 polycrystals containing dispersed H-phase particles up to 70 nm in size obtained by preliminary austenite aging at 873 K for 3 h. It was found that stress-induced martensite aging at 428 K for 12 h results in the appearance of a two-way shape memory effect of −0.5% in compression and +1.8% in tension. Moreover, a significant change in viscoelastic properties can be observed: an increase in internal friction (by 25%) and a change in elastic modulus in tensile samples. The increase in internal friction during martensitic transformation after stress-induced martensite aging is associated with the oriented growth of thermal-induced martensite. After stress-induced martensite aging, the elastic modulus of martensite (EM) increased by 8 GPa, and the elastic modulus of austenite (EA) decreased by 8 GPa. It was shown that stress-induced martensite aging strongly affects the functional and viscoelastic properties of material and can be used to control them.

Effect of W Contents on Martensitic Transformation and Shape Memory Effect in Co-Al-W Alloys

2018 ◽  
Vol 49 (4) ◽  
pp. 1044-1052 ◽  
Author(s):  
X. Yang ◽  
B. N. Qian ◽  
H. B. Peng ◽  
B. J. Wu ◽  
Y. H. Wen
Keyword(s):  
Martensitic Transformation ◽  
Shape Memory ◽  
Shape Memory Effect ◽  
Memory Effect

Hydrogen Influence on Martensitic Transformation and Shape Memory Effect in Titanium Alloys

1995 ◽  
Vol 05 (C8) ◽  
pp. C8-1145-C8-1150
Author(s):  
A.A. Ilyin ◽  
M.Yu. Kollerov ◽  
A.M. Mamonov ◽  
A.A. Krastilevsky ◽  
D.Yu. Makarenkov
Keyword(s):  
Martensitic Transformation ◽  
Shape Memory ◽  
Titanium Alloys ◽  
Shape Memory Effect ◽  
Memory Effect

Shape memory effect due to magnetic field-induced thermoelastic martensitic transformation in polycrystalline Ni–Mn–Fe–Ga alloy

2001 ◽  
Vol 291 (2-3) ◽  
pp. 175-183 ◽  
Author(s):  
A.A. Cherechukin ◽  
I.E. Dikshtein ◽  
D.I. Ermakov ◽  
A.V. Glebov ◽  
V.V. Koledov ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Martensitic Transformation ◽  
Shape Memory ◽  
Shape Memory Effect ◽  
Memory Effect ◽  
Thermoelastic Martensitic Transformation
Sign in / Sign up

Export Citation Format

Share Document