Fracture Properties of Fiber Reinforced Concrete Subjected to Impulsive Loading

1990 ◽  
Vol 211 ◽  
Author(s):  
Farhad Ansari ◽  
Rajendra K. Navalurkar
Keyword(s):  
Reinforced Concrete ◽  
Crack Opening ◽  
Test System ◽  
Impulsive Loading ◽  
Fiber Reinforced Concrete ◽  
Fiber Optic Sensor ◽  
Internal Crack ◽  
Computer Assisted ◽  
Fiber Reinforced ◽  
The Impact

AbstractThe need to accurately predict the response of structures under impact loadings has led to an interest in the mechanical properties of component materials at high rates of loading. The mechanism of cracking and its propagation play an important role in evaluation of the response of fiber reinforced concrete structures subjected to impulsive loading. In the present study, single–edge notched beams were tested under high velocity impact loads. A computer assisted instrumented Charpy test system was employed in performing the impact tests. Development and testing of a new fiber optic sensor, for the determination of internal Crack Opening Displacements (COD) in fiber reinforced concrete is described.

Effect of combined drink cans and steel fibers on the impact resistance and mechanical properties of concrete

2020 ◽  
Vol 14 (2) ◽  
pp. 6734-6742
Author(s):  
A. Syamsir ◽  
S. M. Mubin ◽  
N. M. Nor ◽  
V. Anggraini ◽  
S. Nagappan ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Impact Resistance ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Fiber Reinforced ◽  
Indirect Tensile ◽  
The Impact

This study investigated the combine effect of 0.2 % drink cans and steel fibers with volume fractions of 0%, 0.5%, 1%, 1.5%, 2%, 2.5% and 3% to the mechanical properties and impact resistance of concrete. Hooked-end steel fiber with 30 mm and 0.75 mm length and diameter, respectively was selected for this study.  The drinks cans fiber were twisted manually in order to increase friction between fiber and concrete. The results of the experiment showed that the combination of steel fibers and drink cans fibers improved the strength performance of concrete, especially the compressive strength, flexural strength and indirect tensile strength. The results of the experiment showed that the combination of steel fibers and drink cans fibers improved the compressive strength, flexural strength and indirect tensile strength by 2.3, 7, and 2 times as compare to batch 1, respectively. Moreover, the impact resistance of fiber reinforced concrete has increase by 7 times as compared to non-fiber concretes. Moreover, the impact resistance of fiber reinforced concrete consistently gave better results as compared to non-fiber concretes. The fiber reinforced concrete turned more ductile as the dosage of fibers was increased and ductility started to decrease slightly after optimum fiber dosage was reached. It was found that concrete with combination of 2% steel and 0.2% drink cans fibers showed the highest compressive, split tensile, flexural as well as impact strength.    

Concrete and Fiber Reinforced Concrete Subjected to Impact Loading

1985 ◽  
Vol 64 ◽  
Author(s):  
Surendra P. Shah
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Reinforced Concrete ◽  
Impact Resistance ◽  
Fiber Reinforced Concrete ◽  
Basic Material ◽  
Strain History ◽  
Moderate Increase ◽  
Fiber Reinforced ◽  
The Impact

ABSTRACTDespite its extensive use, low tensile strength has been recognized as one of the major drawbacks of concrete. Although one has learned to avoid exposing concrete structures to adverse static tensile load, these cannot be shielded from short duration dynamic tensile stresses. Such loads originate from sources such as impact from missiles and projectiles, wind gusts, earthquakes and machine vibrations. The need to accurately predict the structural response and reserve capacity under such loading has led to an interest in the mechanical properties of the component materials at high rates of straining.One method to improve the resistance of concrete when subjected to impact and/or impulsive loading is by the incorporation of randomly distributed short fibers. Concrete (or Mortar) so reinforced is termed fiber reinforced concrete (FRC). Moderate increase in tensile strength and significant increases in energy absorption (toughness or impact-resistance) have been reported by several investigators in static tests on concrete reinforced with randomly distributed short steel fibers. A theoretical model to predict fracture toughness of FRC is proposed. This model is based on the concept of nonlinear elastic fracture mechanics.As yet no standard test methods are available to quantify the impact resistance of such composites, although several investigators have employed a variety of tests including drop weight, swinging pendulums and the detonation of explosives. These tests though useful in ascertaining the relative merits of different composites do not yield basic material characteristics which can be used for design.The author has recently developed an instrumented Charpy type of impact test to obtain basic information such as load-deflection relationship, fracture toughness, crack velocity and load-strain history during an impact event. From this information, a damage based constitutive model was proposed. Relative improvements in performance due to the addition of fibers as observed in the instrumented tests are also compared with other conventional methods.

scholarly journals Microscale Cohesive-Friction-Based Finite Element Model for the Crack Opening Mechanism of Hooked-End Steel Fiber-Reinforced Concrete

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 669
Author(s):  
Yassir M. Abbas
Keyword(s):  
Finite Element ◽  
Reinforced Concrete ◽  
Steel Fiber ◽  
Crack Opening ◽  
Fiber Reinforced Concrete ◽  
Embedment Depth ◽  
Fe Model ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete ◽  
Fiber Matrix

The entire mechanical properties of steel fiber-reinforced concrete (SFRC) are significantly dependent on the fiber–matrix interactions. In the current study, a finite element (FE) model was developed to simulate the pullout response of hooked-end SFRC employing cohesive–frictional interactions. Plain stress elements were adapted in the model to exemplify the fiber process constituents, taking into consideration the material nonlinearity of the hooked-end fiber. Additionally, a surface-to-surface contact model was used to simulate the fiber’s behavior in the pullout mechanism. The model was calibrated against experimental observations, and a modification factor model was proposed to account for the 3D phenomenalistic behavior of the pullout behavior. Realistic predictions were obtained by using this factor to predict the entire pullout-slip curves and independent results for the peak pullout load. The numerical results indicated that the increased fiber diameter would alter the mode of crack opening from fiber–matrix damage to that combined with matrix spalling, which can neutralize the sensitivity of the entire pullout response of hooked-end steel fiber to embedment depth. Additionally, the fiber–matrix bond was enhanced by increasing the fiber’s surface area, sensibly leading to a higher pullout peak load and toughness. The developed FE model was also proficient in predicting microstructural stress distribution and deformations during the crack opening of SFRC. This model could be extended to fully model a loaded SFRC composite material by the inclusion of various randomly oriented dosages of fibers in the concrete block.

scholarly journals Increasing the Performance of a Fiber-Reinforced Concrete for Protective Facilities

Fibers ◽  
2021 ◽  
Vol 9 (11) ◽  
pp. 64
Author(s):  
Roman Fediuk ◽  
Mugahed Amran ◽  
Sergey Klyuev ◽  
Aleksandr Klyuev
Keyword(s):  
Reinforced Concrete ◽  
Impact Strength ◽  
Impact Energy ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Secondary Cracks ◽  
Wide Range ◽  
Long Time ◽  
The Impact ◽  
Hardening Coefficient

The use of fiber in cement materials is a promising and effective replacement for bar reinforcement. A wide range of fiber-reinforced concretes based on composite binders with increased impact strength characteristics have been developed. The synthesized composites included the composite binder made of Portland cement, silica, and carbonate additives. Basalt and steel were used as fibers. The nature of the influence of the composition and manufacturing technology of cement composites on the dynamic hardening coefficient has been established, while the growth of these indicators is achieved by creating a denser interfacial transition zone between the cement paste, aggregate, and fiber as a result of improving the homogeneity of the concrete mixture and controlling the consistency. Workability indicators (slump flow up to 730 mm; spreading time up to a diameter of 50 cm is up to 3 s) allow them to be classified as self-compacting concrete mixtures. An increase in the values of the impact strength coefficient by a factor of 5.5, the dynamic hardening coefficient by almost 70% as a result of interfacial interaction between fibers and binder matrix in the concrete composite, as well as absorption of impact energy by fiber, was revealed. The formula describing the effect of the loading rate on the coefficient of dynamic hardening of fiber-reinforced concrete has been refined. The fracture processes of the obtained materials have been established: after the initiation of primary cracks, the structure of the composite absorbs impact energy for a long time, while in the inelastic range (the onset of cracking and peak loads), a large number of secondary cracks appear.

scholarly journals Fiberconcrete with Non-Homogeneous Fibers Distribution

2015 ◽  
Vol 2 ◽  
pp. 67
Author(s):  
Vitalijs Lusis ◽  
Andrejs Krasnikovs
Keyword(s):  
Reinforced Concrete ◽  
Crack Opening ◽  
Fiber Reinforced Concrete ◽  
Homogeneous Distribution ◽  
Structural Elements ◽  
Fiber Reinforced ◽  
Vertical Deflection ◽  
Load Bearing ◽  
Four Point Bending ◽  
Different Types

In this research fiber reinforced concrete prisms with layers of non-homogeneous distribution of fibers inside them were elaborated. Fiber reinforced concrete is important material for load bearing structural elements. Traditionally fibers are homogeneously dispersed in a concrete. At the same time in many situations fiber reinforced concrete with homogeneously dispersed fibers is not optimal (majority of added fibers are not participating in load bearing process). It is possible to create constructions with non-homogeneous distribution of fibers in them in different ways. Present research is devoted to one of them. In the present research three different types of layered prisms with the same amount of fibers in them were experimentally produced (of this research prisms of non-homogeneous fiber reinforced concrete with dimensions 100×100×400 mm were designed. and prisms with homogeneously dispersed fibers were produced for reference as well). Prisms were tested under four point bending conditions till crack opening in each prism reached 6 mm.  During the testing vertical deflection at the center of a prism and crack opening were fixed by the linear displacements transducers in real time.

scholarly journals Mechanical Properties of Aramid/Carbon Hybrid Fiber-Reinforced Concrete

Materials ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 5881
Author(s):  
Yeou-Fong Li ◽  
Hsin-Fu Wang ◽  
Jin-Yuan Syu ◽  
Gobinathan Kadagathur Ramanathan ◽  
Ying-Kuan Tsai ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Reinforced Concrete ◽  
Carbon Fiber ◽  
Mechanical Strength ◽  
Carbon Fibers ◽  
Coupling Agent ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Hybrid Fiber ◽  
The Impact

In this study, aramid fiber (Kevlar® 29 fiber) and carbon fiber were added into concrete in a hybrid manner to enhance the static and impact mechanical properties. The coupling agent presence on the surface of carbon fibers was spotted in Scanning Electron Microscope (SEM) and energy-dispersive X-ray spectroscopy (EDS) graphs. The carbon fiber with a coupling agent affected the mechanical strength of the reinforced concrete. At 1% fiber/cement weight percentage, the hybrid fiber-reinforced concrete (HFRC) prepared using Kevlar fiber and carbon fiber of 12 and 24 mm in length under different mix proportions was investigated to determine the maximum mechanical strengths. From the test results, the mechanical strength of the HFRC attained better performance than that of the concrete with only Kevlar or carbon fibers. Foremost, the mix proportion of Kevlar/carbon fiber (50–50%) significantly improved the compressive, flexural, and splitting tensile strengths. Under different impact energies, the impact resistance of the HFRC specimen was much higher than that of the benchmark specimen, and the damage of the HFRC specimens was examined with an optical microscope to identify slippage or rupture failure of the fiber in concrete.

Fiber Reinforced Concrete Crack Opening Evaluation Using Digital Image Correlation Techniques

2020 ◽  
pp. 270-278
Author(s):  
Kaio Cézar da Silva Oliveira ◽  
Gabriela Silva Dias ◽  
Isadora Queiroz Freire de Carvalho ◽  
Wandersson Bruno Alcides de Morais Silva ◽  
Danilo José Pereira Freitas ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Digital Image Correlation ◽  
Digital Image ◽  
Crack Opening ◽  
Fiber Reinforced Concrete ◽  
Image Correlation ◽  
Fiber Reinforced ◽  
Concrete Crack ◽  
Correlation Techniques

scholarly journals Effect of Strengthening Methods on Two-Way Slab under Low-Velocity Impact Loading

Materials ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 5603
Author(s):  
Sun-Jae Yoo ◽  
Tian-Feng Yuan ◽  
Se-Hee Hong ◽  
Young-Soo Yoon
Keyword(s):  
Reinforced Concrete ◽  
High Performance Concrete ◽  
Impact Load ◽  
Reaction Force ◽  
Impact Resistance ◽  
Fiber Reinforced Concrete ◽  
Low Velocity Impact ◽  
Fiber Reinforced ◽  
Reinforced Concrete Slabs ◽  
The Impact

In this study, the performance of reinforced concrete slabs strengthened using four methods was investigated under impact loads transferred from the top side to bottom side. The top and bottom sides of test slabs were strengthened by no-slump high-strength, high-ductility concrete (NSHSDC), fiber-reinforced-polymer (FRP) sheet, and sprayed FRP, respectively. The test results indicated that the test specimens strengthened with FRP series showed a 4% increase in reaction force and a decrease in deflection by more than 20% compared to the non-strengthened specimens. However, the specimen enhanced by the NSHSDC jacket at both the top and bottom sides exhibited the highest reaction force and energy dissipation as well as the above measurements because it contains two types of fibers in the NSHSDC. In addition, the weight loss rate was improved by approximately 0.12% for the NSHSDC specimen, which was the lowest among the specimens when measuring the weight before and after the impact load. Therefore, a linear relationship between the top and bottom strengthening of the NSHSDC and the impact resistance was confirmed, concluding that the NSHSDC is effective for impact resistance when the top and bottom sides are strengthened. The results of the analysis of the existing research show that the NSHSDC is considered to have high impact resistance, even though it has lower resistance than the steel fiber reinforced concrete and ultra-high-performance-concrete, it can be expected to further studies on strengthening of NSHSDC.

Sign in / Sign up

Export Citation Format

Share Document