Inhomogeneity and Microstructure in e-Beam Evaporated ZrO2 Films

1990 ◽  
Vol 208 ◽  
Author(s):  
M. Bellotto ◽  
C. Cremnonesi ◽  
F. Parmigiani ◽  
M. Scagliotti ◽  
S. Beretta
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Oxygen Partial Pressure ◽  
Zirconium Dioxide ◽  
Oxygen Stoichiometry ◽  
Composition Gradient ◽  
X Ray Diffraction ◽  
X Ray ◽  
Partial Pressures ◽  
Microstructure Of The Material

ABSTRACTThin films of zirconium dioxide are deposited by e-beam evaporation on optically polished borosilicate crown glass. Two different oxygen partial pressures in the chamber are used. The optical properties of the films are characterized by ellipsometry. The influence of oxygen stoichiometry on the composition and microstructure of the material is investigated by polycrystalline X-ray diffraction for different film thicknesses. The films are found to be inhomogeneous, and a composition gradient (i.e. amorphous ⇔ tetragonal ⇔ monoclinic) is observed from the substrate to the surface. The oxygen partial pressure influences the growth of the films.

Structural and optical properties of Tin Oxide and Indium doped SnO2 thin films deposited by thermal evaporation technique

2016 ◽  
Vol 12 (3) ◽  
pp. 4394-4399
Author(s):  
Sura Ali Noaman ◽  
Rashid Owaid Kadhim ◽  
Saleem Azara Hussain
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Tin Oxide ◽  
Thermal Evaporation ◽  
Pure Sno2 ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Evaporation Technique ◽  
Sno2 Thin Films

Tin Oxide and Indium doped Tin Oxide (SnO2:In) thin films were deposited on glass and Silicon  substrates  by  thermal evaporation technique.  X-ray diffraction pattern of  pure SnO2 and SnO2:In thin films annealed at 650oC and the results showed  that the structure have tetragonal phase with preferred orientation in (110) plane. AFM studies showed an inhibition of grain growth with increase in indium concentration. SEM studies of pure  SnO2 and  Indium doped tin oxide (SnO2:In) ) thin films showed that the films with regular distribution of particles and they have spherical shape.  Optical properties such as  Transmission , optical band-gap have been measured and calculated.

Synthesis, Characterization and Optical Properties of PLA / P3HT Blends Thin Films

2021 ◽  
Vol 19 (5) ◽  
pp. 132-138
Author(s):  
Maan Abd-Alameer Salih ◽  
Q.S. Kareem ◽  
Mohammed Hadi Shinen
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Spin Coating ◽  
Ring Opening ◽  
Energy Gap ◽  
Ring Opening Polymerization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Conductivity Increase ◽  
Ft Ir

In this exploration Poly lactic corrosive (PLA) was orchestrated the ring-opening polymerization Poly lactic corrosive (PLA) blended with poly(3-hexylthiophene) (P3HT) which prepared by solution. Blends thin films Synthesis by spin coating technique and using Tetrahydrofuran (THF) as solvent. PLA powder was 'characterized by' 'X-ray' 'diffraction', '(FT-IR)'. pure Optical properties (PLA), (PLA)/P3HT blends thin films with different percentage of P3HT (0, 1, 2, and 3) wt% were investigated using UV-VS spectroscopy The results showed that the absorption, absorption coefficient, extinction coefficient and conductivity increase with increasing the rate of deformation P3HT, The energy gap decreases with increasing deformation.

Effect of Second Complexing Agent of N2H4 on the Optical and Structural Properties of ZnS Thin Films

2013 ◽  
Vol 591 ◽  
pp. 297-300
Author(s):  
Huan Ke ◽  
Shu Wang Duo ◽  
Ting Zhi Liu ◽  
Hao Zhang ◽  
Xiao Yan Fei
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Structural Properties ◽  
Band Gaps ◽  
Complexing Agent ◽  
X Ray Diffraction ◽  
Sphalerite Structure ◽  
X Ray ◽  
Glass Substrates ◽  
Zns Films

ZnS films have been deposited on glass substrates by chemical bath deposition (CBD). The optical and structural properties were analyzed by UV-VIS spectrophotometer and X-ray diffraction (XRD). The results showed that the prepared thin films from the solution using N2H4 as second complexing agent were thicker than those from the solution without adding N2H4 in; this is due to using second complexing agent of N2H4, the deposition mechanisms change which is conductive to heterogeneous deposition. When using N2H4 as second complexing agent, the crystallinity of ZnS thin films improved with a significant peak at 2θ=28.96°which can be assigned to the (111) reflection of the sphalerite structure. The transmittances of the prepared films from the solution adding N2H4 in as second complexing agent were over 85%, compared to those from the solution without N2H4 (over 95%). The band gaps of the ZnS films from the solution using N2H4 as second complexing agent were larger (about 4.0eV) than that from those from the solution without N2H4 (about 3.98eV), which indicated that the prepared ZnS films from the solution adding N2H4 in as second complexing agent were better used as buffer layer of solar cells with adequate optical properties. In short, using N2H4 as second complexing agent, can greatly improve the optical and structural properties of the ZnS thin films.

scholarly journals Scanning X-Ray Diffraction: A Technique With High Compositional Resolution for Studying Phase Formation in Co-Deposited Thin Films

1994 ◽  
Vol 343 ◽  
Author(s):  
T.I. Selinder ◽  
D.J. Miller ◽  
K.E. Gray ◽  
M.A. Beno ◽  
G.S. Knapp
Keyword(s):  
Thin Films ◽  
Phase Formation ◽  
Structural Information ◽  
Metastable Phase ◽  
Ternary Systems ◽  
Composition Gradient ◽  
X Ray Diffraction ◽  
X Ray ◽  
Analysis Technique ◽  
Position Sensitive

ABSTRACTInvestigation of the formation of new metastable phases in alloy thin films requires ways of quickly determining the crystalline structure of samples with different compositions. We report a novel technique for acquiring structural information from films intentionally grown with a composition gradient. For example, binary metal alloy films were deposited using a phase-spread sputtering method. In this way essentially the entire composition range could be grown in a single deposition. By using a narrow incident x-ray beam and a translating sample stage combined with a position sensitive x-ray detector technique, detailed information of the metastable phase diagram can be obtained rapidly. Compositional resolution of the order of ±0.2% can be achieved, and is limited by the brightness of the x-ray source. Initial results from studies of phase formation in Zr-Ta alloys will be presented. Extensions of the analysis technique to ternary systems will be discussed.

Growth and Characterization of ZnO Thin Films Grown by Pulsed Laser Deposition

2011 ◽  
Vol 383-390 ◽  
pp. 6289-6292
Author(s):  
Jian Ting He ◽  
Bo Xue Tan ◽  
Qin Qin Wei ◽  
Yuan Bin Su ◽  
Shu Lian Yang
Keyword(s):  
Thin Films ◽  
Oxygen Partial Pressure ◽  
Partial Pressure ◽  
Pulsed Laser Deposition ◽  
Photoelectron Spectroscopy ◽  
Pulsed Laser ◽  
Laser Deposition ◽  
Zno Thin Films ◽  
X Ray ◽  
Partial Pressures

ZnO thin films were deposited on n-Si (111) substrates at various oxygen partial pressures by pulsed laser deposition (PLD). X-ray diffraction (XRD), scanning electron microscopy (SEM) were used to analyze the influence of the oxygen partial pressure on the crystallization and morphology of the ZnO thin films. An optimal crystallized ZnO thin film was observed at the oxygen partial pressure of 6.5Pa. X-ray photoelectron spectroscopy (XPS) was used to analyze the surface components and distribution status of various elments in ZnO thin films. It was found that ZnO thin films were grown in Zn-rich state.

Effect of Deposition Time on Structural and Optical Properties of ZnO Thin Films Deposited by Spray Pyrolysis

2019 ◽  
Vol 397 ◽  
pp. 81-87 ◽  
Author(s):  
Farid Khediri ◽  
Abdelkader Hafdallah ◽  
Mouna Bouhelal
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Spray Pyrolysis ◽  
Deposition Time ◽  
Spray Pyrolysis Technique ◽  
Precursor Solution ◽  
Zno Thin Films ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
X Ray

In this work Zinc oxide thin films prepared by spray pyrolysis technique. A set of ZnO thin films were deposited with various deposition times, on glass substrate at 350 °C. The precursor solution is formed with zinc acetate in distilled methanol with 0.1 molarity. The deposition time was ranged from 2 to 8 min. The structural and optical properties of those films were examined by X-ray diffraction (XRD) and ultraviolet-visible spectrometer (UV). X-ray diffraction patterns of the ZnO thin films showed polycrystalline hexagonal wurtzite structure and the preferred orientation was along (002) plane when the grain size varied between 9.66 and 16.67nm. ZnO thin films were highly transparent in the visible with the maximum transmittance of 85% and the optical band gap was found between 3.25 and 3.28 eV.

Structural and Optical Properties of ZnO Film Precursors for Multilayered Transparent Solar Cell Electrodes

2015 ◽  
Vol 1132 ◽  
pp. 217-223
Author(s):  
E.R. Rwenyagila ◽  
B. Agyei-Tuffour ◽  
M.G.Z. Kana ◽  
O. Akin-Ojo ◽  
W.O. Soboyejo
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Rf Magnetron Sputtering ◽  
Zno Thin Films ◽  
X Ray Diffraction ◽  
Zno Film ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Deposition Power ◽  
Different Temperatures

This work examines the modification of the structural and optical properties of ZnO thin films by control of deposition and post-treatment parameters. ZnO thin films were deposited by RF magnetron sputtering from a ceramic target locally made at SHESTCO in Abuja, Nigeria. X-ray diffraction measurements characterized the different films prior to thermal annealing as extremely amorphous with average UV-VIS transmittance spectra between 80 and 90%. Annealing at different temperatures and time spans influenced the formation of Wurtzite (002) oriented ZnO crystallites. Contrary to the crystallinity of the films, which was strongly influenced by the deposition power, the optical transmission of the films was only slightly influenced by the deposition power and it was less sensitive to the crystallinity of ZnO thin films.

scholarly journals Study the effect by CO2 laser on some optical properties of (Cd) thin film doping by Ni

2008 ◽  
Vol 5 (3) ◽  
pp. 387-390
Author(s):  
Baghdad Science Journal
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Absorption Coefficient ◽  
Co2 Laser ◽  
Energy Gap ◽  
Hexagonal Structure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Before And After ◽  
Cds Thin Films

In this research study the effect of irradiation by (CW) CO2 laser on some optical properties of (Cds) doping by Ni thin films of (1)µm thickness has been prepared by heat evaporation method. (X-Ray) diffraction technique showed the prepared films before and after irradiation are ploy crystalline hexagonal structure, optical properties were include recording of absorbance spectra for prepared films in the range of (400-1000) nm wave lengths, the absorption coefficient and the energy gap were calculated before and after irradiation, finally the irradiation affected (CdS) thin films by changing its color from the Transparent yellow to dark rough yellow and decrease the value absorption coefficient also increase the value of energy gap.

scholarly journals Impact of ZnO Atomic Ratio on Structural, Morphological and Some Optical Properties of (SnO2)1-x (ZnO)x Thin Films

2020 ◽  
pp. 333-340
Author(s):  
Donia Yas Khudair ◽  
Ramiz Ahmed Al Ansari
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Energy Gap ◽  
Atomic Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Glass Substrates ◽  
Atomic Force ◽  
Uv Visible ◽  
Longitudinal Structures

In this work, SnO2 and (SnO2)1-x(ZnO)x composite thin films with different ZnO atomic ratios (x=0, 5, 10, 15 and 20%) were prepared by pulsed laser deposition technique on clean glass substrates at room temperature without any treatment. The deposited thin films were characterized by x-ray diffraction atomic force microscope  and UV-visible spectrophotometer to study the effect of the ZnO atomic ratio on their structural, morphological and optical properties. It was found that the crystallinety and the crystalline size vary according to ZnO atomic ratio. The surface appeared as longitudinal structures which was convert to spherical shapes with increasing ZnO atomic ratio. The optical transmission and energy gap increased with increasing ZnO atomic ratio. 

Sign in / Sign up

Export Citation Format

Share Document