Synthesis and Characterization of T12Ba2CaCu2O8 and T12Ba2Ca2Cu3O10

1989 ◽  
Vol 169 ◽  
Author(s):  
Lauren E. H. McMills ◽  
Shu Li ◽  
Zhen Zhang ◽  
Martha Greenblatt
Keyword(s):  
Magnetic Susceptibility ◽  
Powder Diffraction ◽  
Single Phase ◽  
Synthesis And Characterization ◽  
Synthetic Method ◽  
Superconducting Properties ◽  
X Ray ◽  
Preparation Conditions ◽  
The Relationship

AbstractSingle-phase samples of T12Ba2CaCu2O8 and T12Ba2Ca2Cu3O10 have been prepared using a reliable and simple synthetic method. Samples were characterized by x-ray powder diffraction, magnetic susceptibility and four probe resistivity methods. The TcR=0 values for T12Ba2CaCu2O8 ranged from 100 to 105K, whereas those for T12Ba2Ca2Cu3O10 ranged from 96 to 107K. The relationship between the superconducting properties and the various preparation conditions are discussed.

Synthesis, Structure, and Characterization of La1−xBax (0 ≤ x ≤ 1)

1992 ◽  
Vol 271 ◽  
Author(s):  
Joseph E. Sunstrom ◽  
Susan M. Kauzlarich
Keyword(s):  
Magnetic Susceptibility ◽  
Powder Diffraction ◽  
Single Phase ◽  
Gravimetric Analysis ◽  
Thermal Gravimetric ◽  
Temperature Dependent ◽  
X Ray ◽  
Early Transition Metal ◽  
Arc Melting

ABSTRACTThe compounds La1−xBaxTiO3 (0 ≤ × ≤ 1) have been prepared by arc melting stoichiometric amounts of LaTiO3 and BaTiO3. Single phase samples can be made for the entire stoichiometry range. The polycrystalline samples have been characterized by thermal gravimetric analysis, X-ray powder diffraction, and temperature dependent magnetic susceptibility. This series of compounds has been studied as a possible candidate for an early transition metal superconductor.

MAGNETIC AND STRUCTURAL PROPERTIES OF SOME ABa2Cu3O7−δ SUPERCONDUCTORS

1987 ◽  
Vol 01 (03n04) ◽  
pp. 989-992 ◽  
Author(s):  
M.T. Causa ◽  
S.M. Dutrús ◽  
C. Fainstein ◽  
G. Nieva ◽  
H.R. Salva ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Electrical Resistivity ◽  
Magnetic Susceptibility ◽  
Specific Heat ◽  
Powder Diffraction ◽  
Magnetic Moments ◽  
Superconducting Properties ◽  
X Ray ◽  
Structural Modifications

We report here normal and superconducting properties of ABa 2 Cu 3 O 7−δ (with A=Y, Gd, Dy, and Er) and of Fe doped YBa2Cu3O7−δ . Results from X-ray powder diffraction, electrical resistivity, magnetic susceptibility, ESR, and specific heat measurements are presented, leading to a characterization of the magnetic properties of these materials. The effect of structural modifications of the lattice on the superconducting properties and the relative insensitivity of Tc to the presence of magnetic moments is discussed.

Synthesis and Characterization of Magnetic Rubidium Superoxide, RbO2

2019 ◽  
Vol 966 ◽  
pp. 237-242
Author(s):  
Fahmi Astuti ◽  
Mizuki Miyajima ◽  
Takahito Fukuda ◽  
Masashi Kodani ◽  
Takehito Nakano ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Magnetic Susceptibility ◽  
Spin Relaxation ◽  
Powder Diffraction ◽  
Solution Method ◽  
Muon Spin ◽  
Muon Spin Relaxation ◽  
Synthesis And Characterization ◽  
X Ray

Polycrystalline rubidium superoxide (RbO2) has been synthesized by using solution method followed by the reaction process under the cooling condition of-40 °C. X-ray Powder Diffraction (XRD) spectra showed that RbO2 was successfully synthesized by this method. The magnetic susceptibility and pulsed muon spin relaxation (μSR) measurements were carried out in order to study the magnetic properties of RbO2.

Synthesis and Characterization of Ruteno-Cuprates by Solid State Reactions

2008 ◽  
Vol 591-593 ◽  
pp. 644-648
Author(s):  
J.M.A. Gimenez ◽  
Carlos Roberto Grandini ◽  
A.R. Jurelo
Keyword(s):  
Solid State ◽  
Low Temperatures ◽  
Magnetic Transition ◽  
Solid State Reactions ◽  
Synthesis And Characterization ◽  
Superconducting Properties ◽  
New Class ◽  
Preparation Conditions ◽  
Magnetic States

A new class of hybrid ruteno-cuprates – such as Ru-1212 and Ru-1222 – was discovered in 1995 by Bauerfeind and collaborators. These materials present superconducting and magnetic states at low temperatures, an atypical duality in other superconductors. The superconductivity is more easily observed in Ru-1222, while Ru-1212 is a more problematic case, due to the strong effects of the preparation details in its superconducting properties, becoming the material superconductor or not. Ru-1212 presents a critical temperature that can vary between 0 and 46 K, depending on the preparation conditions, and a temperature of magnetic transition of around 132 K. The samples were prepared through solid state reactions, by using a mixture of high purity powders, followed by calcination and sinterization in the nitrogen and oxygen atmospheres. This paper shows the preparation process of Ru-1212 samples, followed by their structural and magnetic characterization.

Synthesis and Characterization of the First 1:2 Ordered Perovskite Ruthenate

2002 ◽  
Vol 718 ◽  
Author(s):  
Job Rijssenbeek ◽  
Sylvie Malo ◽  
Takashi Saito ◽  
Vincent Caignaert ◽  
Masaki Azuma ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Neutron Diffraction ◽  
Structure Type ◽  
Synthesis And Characterization ◽  
Neutron Diffraction Data ◽  
X Ray ◽  
Relationship Of ◽  
The Relationship ◽  
Perovskite Lattice

AbstractPerovskite-like mixed metal ruthenates are of interest owing to their varied electronic and magnetic properties, which are heavily dependent on the ordering of the transition metals. We report the synthesis and structural characterization of the first 1:2 ordered perovskite ruthenate, Sr3CaRu2O9. The structure was determined from a combination of powder X-ray, electron and neutron diffraction data and is characterized by a 1:2 ordering of Ca2+ and Ru5+ over the sixcoordinate B-sites of the perovskite lattice. Sr3CaRu2O9 is the first example of this structure-type to include a majority metal with d electrons (Ru(V), d3). The relationship of this material to the K2NiF4-type Sr1.5Ca0.5RuO4 (i.e., Sr3CaRu2O8) highlights the dramatic effects of the ruthenium valence on the resultant structure. Remarkably, these two structures can be quantitatively interconverted by the appropriate choice of reaction temperature and atmosphere.

Synthesis and Characterization of Ti, Fe-Doped Mullite-I

2011 ◽  
Vol 217-218 ◽  
pp. 163-168 ◽  
Author(s):  
Lin Xin Tong ◽  
Jin Hong Li ◽  
Jian Cao
Keyword(s):  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Phase Separation ◽  
Powder Diffraction ◽  
Sol Gel ◽  
Synthesis And Characterization ◽  
Formation Temperature ◽  
Gel Method ◽  
X Ray

A series of gels with 3Al2O3•2SiO2 were prepared by Sol-gel method and heated at several temperatures for 2 h to synthesize Ti, Fe-doped mullite. The powers were characterized by differential thermal analysis (DSC-TG) and X-ray powder diffraction (XRD). Phase separation was promoted by doping both TiO2 and Fe2O3; with increasing the amount of dopant ions the formation temperature of Si-Al spinel decreased and the formation temperature of mullite increased by TiO2 doping but decreased by Fe2O3 doping. The formation temperature of pure mullite was about 1250-1350 °C.

Darstellung und Charakterisierung des Silber(I,II,III)-oxidclathrates Ag7O8HCO3 / Synthesis and Characterization of the Silver(I,II,III) Oxide Clathrate Ag7O8HCO3

2000 ◽  
Vol 55 (9) ◽  
pp. 882-886 ◽  
Author(s):  
Martin Jansen ◽  
Sascha Vensky
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Magnetic Susceptibility ◽  
Solid State Nmr ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

The silver(I,II,III) oxide clathrate Ag7O8HCO3 was synthesized by anodic oxidation of silver(I) in a suspension of Ag2CO3 in an aqueous AgF solution. The title compound was characterized by single crystal X-ray diffraction (cubic, Fm3̄m, a = 9.8085(3) Å, Z = 4), scanning electron microscopy, thermal analysis, IR spectroscopy, 1H-solid state-NMR and measurement of the magnetic susceptibility

Synthesis and Characterization of a Three-dimensional Porous Compound: [Cu(H2O)6][{Cu(H2O)2}2{Cu(H2O)4H4W12O42}] · 12H2O

2008 ◽  
Vol 63 (2) ◽  
pp. 187-192 ◽  
Author(s):  
Chun-jing Zhang ◽  
Ya-guang Chen ◽  
Dong-mei Shi ◽  
Hai-jun Pang
Keyword(s):  
Aqueous Solution ◽  
Magnetic Susceptibility ◽  
Elemental Analysis ◽  
3D Structure ◽  
Three Dimensional ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Vis Spectroscopy

A novel transition metal polyoxotungstate, [Cu(H2O)6][{Cu(H2O)2}2{Cu(H2O)4H4W12O42}] · 12H2O (1), has been synthesized in aqueous solution and characterized by single-crystal X-ray diffraction, elemental analysis, IR and UV/vis spectroscopy, and TG analysis. The paradodecatungstate anions [H2W12O42]10− are linked by CuO6 octahedra, forming a three-dimensional (3D) structure. The magnetic susceptibility of compound 1 in the temperature range 2 - 300 K shows the presence of antiferromagnetic interactions within the uniform Cu2・ ・ ・Cu3 chains

Synthesis and Characterization of Low Density Bi-2223 Cuprates Superconductor Doped Eu2O3 Nanoparticles

2021 ◽  
Vol 317 ◽  
pp. 131-137
Author(s):  
Suhaimi Nurbaisyatul Ermiza ◽  
Azhan Hashim ◽  
Azman Kasim ◽  
Norazila Ibrahim ◽  
Siti Fatimah Saipuddin
Keyword(s):  
Solid State Reaction Method ◽  
Synthesis And Characterization ◽  
Crystallographic Structure ◽  
Low Density ◽  
Superconducting Properties ◽  
X Ray Diffraction ◽  
Conventional Solid State Reaction ◽  
X Ray ◽  
Resistivity Measurements

Bi1.6Pb0.4Sr2Ca2-xEuxCu3Oδ cuprates superconductor doped with Eu nanoparticles (x = 0.0000, 0.0025, 0.0200 and 0.0500) were synthesized through conventional solid state reaction method. Crystalline sucrose was added during pelletization and burn at 400°C for two hours to create low density sample. The effect of doping Eu2O3 nanoparticles on the structural and superconducting properties by means of critical temperature (Tc), critical current density (Jc), X-ray diffraction (XRD) together with Field Emission Scanning Electron Microscopy (FESEM) and Alternating Current Susceptibility (ACS) were studied. Based on XRD analyses, the crystallographic structure has shown slightly changed from tetragonal to orthorhombic. The amount of 2223 phase gradually decreased with the increment of Eu concentration which indicates that Eu nanoparticles substitution favours the growth of 2212 phases. The resistivity measurements show that the highest Tcvalue for doped samples found at 90 K for x = 0.0025. The FESEM images showed that the plate-like grains become smaller and distributed randomly without specific alignment due to the increment of Eu concentration.

Karakterisasi Struktur Kristal dan Sifat Magnetik Magnet Stronsium Ferit Pasir Besi Batang Sukam Kabupaten Sijunjung Sumatera Barat

2017 ◽  
Vol 1 ◽  
pp. 38
Author(s):  
Arif Budiman ◽  
Dwi Puryanti ◽  
Sri Mulyadi Dt. Basa ◽  
Muhammad Rizki ◽  
Helfi Syukriani
Keyword(s):  
Crystal Structure ◽  
Magnetic Properties ◽  
Magnetic Susceptibility ◽  
Single Phase ◽  
Oxidation Process ◽  
Strontium Ferrite ◽  
X Ray Diffraction ◽  
Hexagonal Crystal ◽  
X Ray

<p><strong>Abstract:</strong> The synthesis and characterization of the crystal structure and magnetic properties of strontium ferrite magnets (SrO.6Fe<sub>2</sub>O<sub>3</sub>) has been done. Hematite (Fe<sub>2</sub>O<sub>3</sub>) is synthesized from iron sand of Batang Sukam Sijunjung Sumatera Barat through the oxidation process by temperature 700ºC for 3.0 hours. Strontium carbonate (SrCO<sub>3</sub>) was obtained from Merck product with a purity of more than 99%. Synthesis of strontium ferrite magnets are made through a process of solid-solid mixing and sintering at a temperature of 1000ºC for 3.0 hours. The results of characterization of X-ray diffraction indicates that it has formed a single phase strontium ferrite magnets with a hexagonal crystal structure. The result of measurement of the magnetic properties shows that an average magnetic susceptibility of strontium ferrite magnet is 266.7 × 10<sup>-8 </sup>m<sup>3</sup> /kg.</p><p> </p><p><strong>Keywords</strong>: strontium ferrite magnet, iron sand, crystal structure and magnetic susceptibility.</p><p><strong> </strong></p><p><strong>Abstrak:</strong> Telah dilakukan sintesis dan karakterisasi struktur kristal dan sifat magnetik magnet stronsium ferit (SrO.6Fe<sub>2</sub>O<sub>3</sub>). Hematit (Fe<sub>2</sub>O<sub>3</sub>) disintesis daripasir besi Batang Sukam Kabupaten Sijunjung Sumatera Barat melalui proses oksidasi dengan temperatur 700ºC selama 3,0 jam. Stronsium karbonat (SrCO<sub>3</sub>) diperoleh dari produk Merck dengan kemurnian lebih dari 99 %. Sintesis magnet stronsium ferit dibuat melalui proses <em>solid-solid mixing</em> dan disintering pada suhu 1000ºC selama 3,0 jam. Hasil karakterisasi difraksi sinar-X menunjukkan bahwa telah terbentuk <em>single phase</em> magnet stronsium ferit dengan struktur kristal heksagonal. Hasil pengukuran sifat magnet menunjukkan bahwa magnet stronsium ferit memiliki suseptibilitas magnetik rata-rata 266,7 × 10<sup>-8</sup> m<sup>3</sup>/kg.</p><p> </p><p><strong>Kata Kunci:</strong> magnet stronsium ferit, pasir besi, struktur kristal dan suseptibilitas magnetik.</p>

Sign in / Sign up

Export Citation Format

Share Document