Glass-Ceramics for Electronic Packaging

1989 ◽  
Vol 167 ◽  
Author(s):  
J. F. Macdowell ◽  
G. H. Beall
Keyword(s):  
Electronic Packaging ◽  
Glass Ceramics ◽  
Ceramic Materials ◽  
Microelectronic Packaging ◽  
Bulk Glass ◽  
Fine Ceramic ◽  
New Generation

AbstractGlass-ceramics appear to constitute a new generation in fine ceramic materials for microelectronic packaging. The distinction between glass-ceramics derived via internal nucleation and crystallization of bulk glass and those formed by sintering and surface devitrification of glass particulates is discussed.

Ceramic Materials for Electronic Packaging

1989 ◽  
Vol 111 (3) ◽  
pp. 183-191 ◽  
Author(s):  
E. M. Rabinovich
Keyword(s):  
Electronic Packaging ◽  
Sol Gel ◽  
Glass Ceramics ◽  
Ceramic Materials ◽  
Packaging Materials ◽  
Ceramic Powders ◽  
Main Attention

The paper reviews ceramic materials that are used or can be used in electronic packaging. Main attention is given in relatively new packaging materials such as highly thermal conductive AlN and SiC (BeO-doped) or low-firing cordierite and spodumene glass-ceramics. Application of sol-gel processes in preparation of ceramic powders is discussed.

Energy saving technology for sintering of black bricks from high-siliceous clay

MRS Advances ◽  
2020 ◽  
Vol 5 (61) ◽  
pp. 3123-3131
Author(s):  
Mario Flores Nicolas ◽  
Marina Vlasova ◽  
Pedro Antonio Márquez Aguilar ◽  
Mykola Kakazey ◽  
Marcos Mauricio Chávez Cano ◽  
...  
Keyword(s):  
Low Temperature ◽  
Oxygen Deficiency ◽  
Glass Ceramics ◽  
Total Content ◽  
Ceramic Materials ◽  
Ternary Mixtures ◽  
High Porosity ◽  
Reducing Conditions ◽  
Binary And Ternary Mixtures ◽  
Dark Color

AbstractThe low-temperature synthesis of bricks prepared from high-siliceous clays by the method of plastic molding of blanks was used. For the preparation of brick blanks, binary and ternary mixtures of high-siliceous clays, black sand, and bottle glass cullet were used. Gray-black low-porosity and high-porosity ceramics was obtained by sintering under conditions of oxygen deficiency. It has been established that to initiate plastic in mixtures containing high-siliceous clay, it is necessary to add montmorillonite/bentonite additives, carry out low-temperature sintering, and introduce low-melting glass additives with a melting point ranging from 750 to 800 °C. The performed investigations have shown that the sintering of mixtures with a total content of iron oxide of about 5 wt% under reducing conditions at Tsint. = 800°C for 8 h leads to the formation of glass ceramics consisting of quartz, feldspars, and a phase. The main sources of the appearance of a dark color is the formation of [Fe3+O4]4- and [Fe3+O6]9- anions in the composition of the glass phase and feldspars. By changing the contents of clay, sand, and glass in sintering, it is possible to obtain two types of ceramic materials: (a) in the form of building bricks and (b) in the form of porous fillers.

scholarly journals Towards Higher Electric Conductivity and Wider Phase Stability Range via Nanostructured Glass-Ceramics Processing

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1321
Author(s):  
Tomasz K. Pietrzak ◽  
Marek Wasiucionek ◽  
Jerzy E. Garbarczyk
Keyword(s):  
Glass Ceramic ◽  
Electronic Conductivity ◽  
Glass Ceramics ◽  
Temperature Stability ◽  
Ceramic Materials ◽  
Glassy Matrix ◽  
Oxide Glasses ◽  
Thermal Transitions ◽  
Stability Range ◽  
Conductivity Enhancement

This review article presents recent studies on nanostructured glass-ceramic materials with substantially improved electrical (ionic or electronic) conductivity or with an extended temperature stability range of highly conducting high-temperature crystalline phases. Such materials were synthesized by the thermal nanocrystallization of selected electrically conducting oxide glasses. Various nanostructured systems have been described, including glass-ceramics based on ion conductive glasses (silver iodate and bismuth oxide ones) and electronic conductive glasses (vanadate-phosphate and olivine-like ones). Most systems under consideration have been studied with the practical aim of using them as electrode or solid electrolyte materials for rechargeable Li-ion, Na-ion, all-solid batteries, or solid oxide fuel cells. It has been shown that the conductivity enhancement of glass-ceramics is closely correlated with their dual microstructure, consisting of nanocrystallites (5–100 nm) confined in the glassy matrix. The disordered interfacial regions in those materials form “easy conduction” paths. It has also been shown that the glassy matrices may be a suitable environment for phases, which in bulk form are stable at high temperatures, and may exist when confined in nanograins embedded in the glassy matrix even at room temperature. Many complementary experimental techniques probing the electrical conductivity, long- and short-range structure, microstructure at the nanometer scale, or thermal transitions have been used to characterize the glass-ceramic systems under consideration. Their results have helped to explain the correlations between the microstructure and the properties of these systems.

scholarly journals Preparation of basalt-based glass ceramics

2003 ◽  
Vol 68 (6) ◽  
pp. 505-510 ◽  
Author(s):  
Branko Matovic ◽  
Snezana Boskovic ◽  
Mihovil Logar
Keyword(s):  
Optical Microscopy ◽  
Phase Analysis ◽  
Glass Ceramic ◽  
Glassy Phase ◽  
Raw Materials ◽  
Glass Ceramics ◽  
High Strength ◽  
Ceramic Materials ◽  
X Ray ◽  
Glass Ceramic Materials

Local and conventional raw materials?massive basalt from the Vrelo locality on Kopaonik mountain?have been used as starting materials to test their suitability for the production of glass-ceramics. Crystallization phenomena of glasses of the fused basalt rocks were studied by X-ray phase analysis optical microscopy and other techniques. Various heat treatments were used and their influences, on controlling the microstructures and properties of the products were studied with the aim of developing high strength glass-ceramic materials. Diopside CaMg(SiO3)2 and hypersthene ((Mg,Fe)SiO3) were identifies as the crystalline phases. The final products contained considerable amounts of a glassy phase. The crystalline size was in range of 8?480 ?m with plate or needle shape. Microhardness, crashing strength and wears resistence of the glass-ceramics ranged from 6.5?7.5, from 2000?6300 kg/cm2 and from 0.1?0.2 g/cm, respectively.

scholarly journals Dilemmas in zirconia bonding: A review

2013 ◽  
Vol 141 (5-6) ◽  
pp. 395-401 ◽  
Author(s):  
Kosovka Obradovic-Djuricic ◽  
Vesna Medic ◽  
Slobodan Dodic ◽  
Dragan Gavrilov ◽  
Djordje Antonijevic ◽  
...  
Keyword(s):  
Bond Strength ◽  
Glass Ceramics ◽  
Ceramic Materials ◽  
The Other ◽  
Zirconia Ceramic ◽  
Bonding Mechanism ◽  
Luting Cements ◽  
Esthetic Dentistry ◽  
Selection Of

This article presents a literature review on the resin bond to zirconia ceramic. Modern esthetic dentistry has highly recognized zirconia, among other ceramic materials. Biocompatibility of zirconia, chemical and dimensional stability, excellent mechanical properties, all together could guarantee optimal therapeutical results in complex prosthodontic reconstruction. On the other hand, low thermal degradation, aging of zirconia as well as problematic bonding of zirconia framework to dental luting cements and tooth structures, opened the room for discussion concerning their clinical durability. The well known methods of mechanical and chemical bonding used on glass-ceramics are not applicable for use with zirconia. Therefore, under critical clinical situations, selection of the bonding mechanism should be focused on two important points: high initial bond strength value and long term bond strength between zirconia-resin interface. Also, this paper emphases the use of phosphate monomer luting cements on freshly air-abraded zirconia as the simplest and most effective way for zirconia cementation procedure today.

scholarly journals Utilization of discarded foundry sand (DFS) and inorganic waste from cellulose and paper industry for the manufacture of glass-ceramic materials

Cerâmica ◽  
2020 ◽  
Vol 66 (380) ◽  
pp. 413-420
Author(s):  
L. M. S. e Silva ◽  
R. S. Magalhães ◽  
W. C. Macedo ◽  
G. T. A. Santos ◽  
A. E. S. Albas ◽  
...  
Keyword(s):  
Glass Ceramic ◽  
Raw Materials ◽  
Paper Industry ◽  
Glass Ceramics ◽  
Ceramic Materials ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Foundry Sand ◽  
X Ray ◽  
Glass Ceramic Materials

Abstract Recycling has been pointed out as an alternative to the disposal of waste materials in industrial landfills. In the present study, the transformation of residues (discarded foundry sand - DFS, grits, and lime mud) in glass-ceramic materials is shown. The glasses were obtained by the melting/cooling method. The precursor materials, glasses, and glass-ceramics were characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), and differential scanning calorimetry/thermal gravimetric analysis (DSC/TGA). The glassy materials were milled, pelleted, and thermally treated at the crystallization temperatures given by DSC data to obtain the glass-ceramics (885, 961, and 1090 ºC). The main formed phases were cristobalite, α-wollastonite (parawollastonite), and β-wollastonite (pseudowollastonite). The glass-ceramics showed very low water absorption and apparent porosity (0.26 to 0.88 wt% and 0.66 to 1.77 vol%, respectively). The results confirmed that the studied residues can be used as raw materials for the manufacture of vitreous and glass-ceramic materials.

Rare-earth doped transparent nano-glass-ceramics: a new generation of photonic integrated devices

2007 ◽  
Author(s):  
Vicente Daniel Rodríguez-Armas ◽  
Victor K. Tikhomirov ◽  
Jorge Méndez-Ramos ◽  
Angel C. Yanes ◽  
Javier Del-Castillo ◽  
...  
Keyword(s):  
Rare Earth ◽  
Glass Ceramics ◽  
Integrated Devices ◽  
New Generation ◽  
Rare Earth Doped
Sign in / Sign up

Export Citation Format

Share Document