Improvement of Elevated Temperature Material Properties in Intermetallic Compound Ni3Al

1988 ◽  
Vol 133 ◽  
Author(s):  
Akitsugu Fujita ◽  
Tatsuki Matsumoto ◽  
Makoto Nakamura ◽  
Yorimasa Takeda
Keyword(s):  
Mechanical Properties ◽  
Elevated Temperature ◽  
Intermetallic Compound ◽  
Material Properties ◽  
Creep Rupture ◽  
Low Strength ◽  
Inconel 713C ◽  
Rupture Properties

ABSTRACTIntermetallic compound Ni3Al(γ′) is one of the major constituents in Ni-base superalloys. But it is not used by itself for structural use because of its low ductility and low strength.In the present study, the improvement of elevated temperature mechanical properties of Ni3Al intermetallic compound is pursued by addition of such elements as Fe, Ti, Cr, V, Nb, Ta, Mo, W, Zr and Hf. These results show that Ni 3AI which contains some elements substituting for Al has better mechanical properties and creep rupture properties than commercial Inconel 713C.

Influence of Recycled Irradiated HDPE on Mechanical Behavior of LDPE/Hdpex Blends

2014 ◽  
Vol 1025-1026 ◽  
pp. 265-269 ◽  
Author(s):  
Jan Navratil ◽  
Miroslav Manas ◽  
Michal Stanek ◽  
David Manas ◽  
Martin Bednarik ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Elevated Temperature ◽  
Material Properties ◽  
High Density Polyethylene ◽  
Low Density Polyethylene ◽  
Final Conclusion ◽  
Low Density ◽  
Upward Trend ◽  
Nominal Strain

This research paper deals with utilization of recycled irradiated high-density polyethylene (HDPEx). Grit prepared of irradiated HDPEx was used as a filler into virgin low-density polyethylene (LDPE). Concentrations from 10 to 60 % were made and their influence on mechanical properties was investigated. Tensile test at ambient and elevated temperature was used to describe mechanical properties of resulting blends. Results show that there is an upward trend of elastic modulus and ultimate tensile strength and downward trend of nominal strain at ambient temperature. Similar findings were observed at elevated temperature, which might suggest possible utilization of such modified thermoplastic materials. However other material properties have to be tested to make final conclusion.

Microstructure and Mechanical Properties of Mg-Al-Ca-Sm Alloys at High Temperature

2007 ◽  
Vol 345-346 ◽  
pp. 653-656 ◽  
Author(s):  
Hyeon Taek Son ◽  
Jae Seol Lee ◽  
Ji Min Hong ◽  
Ik Hyun Oh ◽  
Kyosuke Yoshimi ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Elevated Temperature ◽  
Intermetallic Compound ◽  
Grain Boundary ◽  
Intermetallic Compounds ◽  
Ultimate Strength ◽  
Maximum Yield ◽  
Microstructure And Mechanical Properties ◽  
Equiaxed Grain

The aims of this research are to investigate the effect of Sm addition in Mg-Al-Ca alloys on microstructure and mechanical properties. Sm addition to Mg-5Al-3Ca based alloys results in the change from dendritic to equiaxed grain morphorlogy and formation of Al-Sm rich itermetallic compounds at grain boundary and α-Mg matrix. And these Al-Sm rich intermetallic compounds were dispersed homogeously and stabilized at high temperature. And maximum yield and ultimate strength value was obtained at Mg-5Al-3Ca-2Sm alloys at elevated temperature because of homogeneous dispersion of stable Al-Sm rich intermetallic compound at high temperature.

Sign in / Sign up

Export Citation Format

Share Document