Laser Annealing of Defects in Vpe and Cz Grown Gallium Arsenide with a Pulsed Nd:Yag Laser

1980 ◽  
Vol 1 ◽  
Author(s):  
P. M. Mooney ◽  
J. C. Bourgoin ◽  
J. Icole

ABSTRACTGallium arsenide crystals, both VPE and Cz grown, were annealed with a pulsed Nd:YAG laser. Gold Schottky diodes were fabricated and defects were studied using the DLTS technique. The native defect E(0.83eV) was found to anneal while other electron traps, E(0.39eV) in both materials and E(0.30eV)in Cz material, remained after irradiation. A new trap, E(0.70eV), was observed after laser irradiation in both materials.Cz GaAs samples implanted with both Ga and As were also laser annealed. The E(0.83eV) level was not observed after implantation. The E(0.30eV) trap and new levels, E(0.44eV) and E(0.6leV) were observed. C-V measurements and defect profiles indicate that the recrystallized layer is far from defect free.

2001 ◽  
Vol 19 (6) ◽  
pp. 315-318 ◽  
Author(s):  
Keiko Yokoyama ◽  
Yuichi Kimura ◽  
Koukichi Matsumoto ◽  
Akihiro Fujishima ◽  
Takashi Miyazaki

2010 ◽  
Vol 129-131 ◽  
pp. 714-718 ◽  
Author(s):  
Farazila Yusof ◽  
Yoshiharu Mutoh ◽  
Yukio Miyashita

In the present study, effect of pre-oxidized (PO) CuO layer in the joining between polyethylene terephalate (PET) and copper (Cu) by using pulsed Nd:YAG laser was investigated. The experimental result for PET/PO Cu (with pre-oxidized layer) and PET/Cu (without pre-oxidized layer) were presented in this paper. The results showed the pre-oxidation surface improved the welding efficiency. The welded area and tensile shear failure load (TSFL) of PET/PO Cu joint were increased when pre-oxidized layer was introduced. This indicates that high heat was absorbed during laser irradiation of PET/PO-Cu joint compare to PET/Cu joint. On the other hand, the fracture surface of PET/PO-Cu showed the presence of Cu and Cu oxide particles in the PET side. While in case of PET/Cu, no occurrence of Cu particles can be observed. The presence of Cu oxide particles and Cu particles were believed may increase PET/PO Cu joint shear force. From the cross-sectional observation of PET/PO Cu joint interface, it was found that an oxide layer in the laser irradiation area was removed and PET seemed to have intimate contact with Cu surface.


Biofouling ◽  
2002 ◽  
Vol 18 (2) ◽  
pp. 123-127 ◽  
Author(s):  
Kanavillil Nandakumar ◽  
Hideki Obika ◽  
Tatsuya Shinozaki ◽  
Toshihiko Ooie ◽  
Akihiro Utsumi ◽  
...  

1997 ◽  
Vol 27 (2) ◽  
pp. 317
Author(s):  
Kyung-Yoon Han ◽  
Kwang-Yong Shin ◽  
Chun-Seok Kim ◽  
Hyung-Soo Kim ◽  
Chang-Yup Yum ◽  
...  

2005 ◽  
Vol 36 (3) ◽  
pp. 225-233 ◽  
Author(s):  
Yi-Jane Chen ◽  
Jiiang-Huei Jeng ◽  
Chung-Chen Jane Yao ◽  
Min-Huey Chen ◽  
Lein-Tuan Hou ◽  
...  

2004 ◽  
Vol 22 (6) ◽  
pp. 470-476 ◽  
Author(s):  
Tomoo Anjo ◽  
Arata Ebihara ◽  
Atsushi Takeda ◽  
Masaaki Takashina ◽  
Mitsuhiro Sunakawa ◽  
...  

1996 ◽  
Vol 14 (6) ◽  
pp. 399-403 ◽  
Author(s):  
CHENGFEI ZHANG ◽  
YUICHI KIMURA ◽  
KOUKICHI MATSUMOTO

Sign in / Sign up

Export Citation Format

Share Document