M13 Bacteriophage Biolaminates for Nanomaterials with Improved Stiffness

2015 ◽  
Vol 1722 ◽  
Author(s):  
Christopher M. Warner ◽  
Amitabh Ghoshal ◽  
Michael F. Cuddy ◽  
Aimee R. Poda ◽  
Natalie D. Barker ◽  
...  
Keyword(s):  
Thin Films ◽  
High Performance ◽  
Liquid Crystalline ◽  
Genetically Engineered ◽  
Solution Chemistry ◽  
Thin Layers ◽  
M13 Bacteriophage ◽  
Material Development ◽  
Film Fabrication ◽  
M13 Phage

ABSTRACTIn nature, biomolecules guide the formation of hierarchically-ordered, lightweight, inorganic-organic composites such as corals, shells, teeth and bones. M13 bacteriophage has been used to mimic bio-inspired material development due to its rigid, nanoscale rod-like morphology. Liquid-crystalline monolayers of genetically engineered phage have been used to template crystallization of thin layers of inorganic and metallic materials. We have created thin films composed of engineered M13 phage capable of binding inorganic components. We employed both a dip-cast and a drop-cast film fabrication method on both smooth and rough gold, silica and glass casting surfaces to create thin films and 3D structures of various degrees of hierarchical order. We have found the engineered M13 phage and the inorganic mineral significantly affected both film morphology and the mechanical properties of the film. Similarly, film fabrication parameters such as solution chemistry, temperature, and pulling speed affected film properties. Using a calcium phosphate biomineralized 4E phage, film thickness increased linearly with the number of layers/dips in the phage solution. The stiffness of these composites (Young's modulus) were >80 GPa for mineralized, multilayer films. These materials are an order of magnitude stiffer than the biological equivalent collagen. Stiffness, however, does not appear to increase in a multilayer film beyond a saturation point. Ultimately, we have developed a platform for phage-based bio-composites for developing high performance materials.

scholarly journals Improvement of High Affinity and Selectivity on Biosensors Using Genetically Engineered Phage by Binding Isotherm Screening

Viruses ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 248 ◽  
Author(s):  
Jong-Min Lee ◽  
Eun Choi ◽  
Juyun Park ◽  
Vasanthan Devaraj ◽  
ChunTae Kim ◽  
...  
Keyword(s):  
Screening Method ◽  
Target Material ◽  
Genetically Engineered ◽  
Titration Calorimetry ◽  
Binding Affinities ◽  
Binding Model ◽  
Screening Process ◽  
M13 Bacteriophage ◽  
Bacteriophage M13 ◽  
M13 Phage

The genetically engineered M13 bacteriophage (M13 phage), developed via directed evolutionary screening process, can improve the sensitivity of sensors because of its selective binding to a target material. Herein, we propose a screening method to develop a selective and sensitive bioreporter for toxic material based on genetically engineered M13 phage. The paraquat (PQ)-binding M13 phage, developed by directed evolution, was used. The binding affinities of the PQ-binding M13 phage to PQ and similar molecules were analyzed using isothermal titration calorimetry (ITC). Based on the isotherms measured by ITC, binding affinities were calculated using the one-site binding model. The binding affinity was 5.161 × 10−7 for PQ, and 3.043 × 10−7 for diquat (DQ). The isotherm and raw ITC data show that the PQ-binding M13 phage does not selectively bind to difenzoquat (DIF). The phage biofilter experiment confirmed the ability of PQ-binding M13 bacteriophage to bind PQ. The surface-enhanced Raman scattering (SERS) platform based on the bioreporter, PQ-binding M13 phage, exhibited 3.7 times the signal intensity as compared with the wild-type-M13-phage-coated platform.

In-Plane Liquid Crystalline Texture of High-Performance Thienothiophene Copolymer Thin Films

2010 ◽  
Vol 20 (23) ◽  
pp. 4098-4106 ◽  
Author(s):  
Xinran Zhang ◽  
Steven D. Hudson ◽  
Dean M. DeLongchamp ◽  
David J. Gundlach ◽  
Martin Heeney ◽  
...  
Keyword(s):  
Thin Films ◽  
High Performance ◽  
Liquid Crystalline

Morphology of High-Performance Rigid-Rod Polymer Fibers and Molecular Composites

1989 ◽  
Vol 47 ◽  
pp. 338-339
Author(s):  
W.W. Adams ◽  
S. J. Krause
Keyword(s):  
Tensile Strength ◽  
High Performance ◽  
Liquid Crystalline ◽  
Molecular Level ◽  
Synergistic Effects ◽  
Tensile Modulus ◽  
Commercial Development ◽  
The Matrix ◽  
Molecular Composites ◽  
Rigid Rod

Rigid-rod polymers such as PBO, poly(paraphenylene benzobisoxazole), Figure 1a, are now in commercial development for use as high-performance fibers and for reinforcement at the molecular level in molecular composites. Spinning of liquid crystalline polyphosphoric acid solutions of PBO, followed by washing, drying, and tension heat treatment produces fibers which have the following properties: density of 1.59 g/cm3; tensile strength of 820 kpsi; tensile modulus of 52 Mpsi; compressive strength of 50 kpsi; they are electrically insulating; they do not absorb moisture; and they are insensitive to radiation, including ultraviolet. Since the chain modulus of PBO is estimated to be 730 GPa, the high stiffness also affords the opportunity to reinforce a flexible coil polymer at the molecular level, in analogy to a chopped fiber reinforced composite. The objectives of the molecular composite concept are to eliminate the thermal expansion coefficient mismatch between the fiber and the matrix, as occurs in conventional composites, to eliminate the interface between the fiber and the matrix, and, hopefully, to obtain synergistic effects from the exceptional stiffness of the rigid-rod molecule. These expectations have been confirmed in the case of blending rigid-rod PBZT, poly(paraphenylene benzobisthiazole), Figure 1b, with stiff-chain ABPBI, poly 2,5(6) benzimidazole, Fig. 1c A film with 30% PBZT/70% ABPBI had tensile strength 190 kpsi and tensile modulus of 13 Mpsi when solution spun from a 3% methane sulfonic acid solution into a film. The modulus, as predicted by rule of mixtures, for a film with this composition and with planar isotropic orientation, should be 16 Mpsi. The experimental value is 80% of the theoretical value indicating that the concept of a molecular composite is valid.

Electrical Anisotropy of Thin Metal Films Growing on Dielectric Substrates

2002 ◽  
Vol 7 (2) ◽  
pp. 45-52
Author(s):  
L. Jakučionis ◽  
V. Kleiza
Keyword(s):  
Magnetic Field ◽  
Thin Films ◽  
Uniaxial Anisotropy ◽  
Metal Films ◽  
Thin Layers ◽  
Electrical Anisotropy ◽  
Electrical Field ◽  
Dielectric Substrates ◽  
Unequal Probability ◽  
Conductive Thin Films

Electrical properties of conductive thin films, that are produced by vacuum evaporation on the dielectric substrates, and which properties depend on their thickness, usually are anisotropic i.e. they have uniaxial anisotropy. If the condensate grow on dielectric substrates on which plane electrical field E is created the transverse voltage U⊥ appears on the boundary of the film in the direction perpendicular to E. Transverse voltage U⊥ depends on the angle γ between the applied magnetic field H and axis of light magnetisation. When electric field E is applied to continuous or grid layers, U⊥ and resistance R of layers are changed by changing γ. It means that value of U⊥ is the measure of anisotropy magnitude. Increasing voltage U0 , which is created by E, U⊥ increases to certain magnitude and later decreases. The anisotropy of continuous thin layers is excited by inequality of conductivity tensor components σ0 ≠ σ⊥. The reason of anisotropy is explained by the model which shows that properties of grain boundaries are defined by unequal probability of transient of charge carrier.

Biodecomposition of Phenanthrene and Pyrene by a Genetically Engineered Escherichia coli

2020 ◽  
Vol 14 (2) ◽  
pp. 121-133 ◽  
Author(s):  
Maryam Ahankoub ◽  
Gashtasb Mardani ◽  
Payam Ghasemi-Dehkordi ◽  
Ameneh Mehri-Ghahfarrokhi ◽  
Abbas Doosti ◽  
...  
Keyword(s):  
Escherichia Coli ◽  
High Performance ◽  
Human Cancer ◽  
Genetically Engineered ◽  
Hazardous Substances ◽  
E Coli ◽  
Spiked Soil ◽  
Engineered Escherichia Coli ◽  
Genetically Manipulated ◽  
Hplc Measurement

Background: Genetically engineered microorganisms (GEMs) can be used for bioremediation of the biological pollutants into nonhazardous or less-hazardous substances, at lower cost. Polycyclic aromatic hydrocarbons (PAHs) are one of these contaminants that associated with a risk of human cancer development. Genetically engineered E. coli that encoded catechol 2,3- dioxygenase (C230) was created and investigated its ability to biodecomposition of phenanthrene and pyrene in spiked soil using high-performance liquid chromatography (HPLC) measurement. We revised patents documents relating to the use of GEMs for bioremediation. This approach have already been done in others studies although using other genes codifying for same catechol degradation approach. Objective: In this study, we investigated biodecomposition of phenanthrene and pyrene by a genetically engineered Escherichia coli. Methods: Briefly, following the cloning of C230 gene (nahH) into pUC18 vector and transformation into E. coli Top10F, the complementary tests, including catalase, oxidase and PCR were used as on isolated bacteria from spiked soil. Results: The results of HPLC measurement showed that in spiked soil containing engineered E. coli, biodegradation of phenanthrene and pyrene comparing to autoclaved soil that inoculated by wild type of E. coli and normal soil group with natural microbial flora, were statistically significant (p<0.05). Moreover, catalase test was positive while the oxidase tests were negative. Conclusion: These findings indicated that genetically manipulated E. coli can provide an effective clean-up process on PAH compounds and it is useful for bioremediation of environmental pollution with petrochemical products.

scholarly journals High performance, electroforming-free, thin film memristors using ionic Na0.5Bi0.5TiO3

2021 ◽  
Vol 9 (13) ◽  
pp. 4522-4531
Author(s):  
Chao Yun ◽  
Matthew Webb ◽  
Weiwei Li ◽  
Rui Wu ◽  
Ming Xiao ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Resistive Switching ◽  
Growth Temperature ◽  
High Performance ◽  
20 Nm

Interfacial resistive switching and composition-tunable RLRS are realized in ionically conducting Na0.5Bi0.5TiO3 thin films, allowing optimised ON/OFF ratio (>104) to be achieved with low growth temperature (600 °C) and low thickness (<20 nm).

In-situ growth of high-performance (Ag, Sn) co-doped CoSb3 thermoelectric thin films

2021 ◽  
Author(s):  
Zhuang-Hao Zheng ◽  
Jun-Yun Niu ◽  
Dong-Wei Ao ◽  
Bushra Jabar ◽  
Xiao-Lei Shi ◽  
...  
Keyword(s):  
Thin Films ◽  
High Performance ◽  
In Situ Growth ◽  
Thermoelectric Thin Films ◽  
Co Doped
Sign in / Sign up

Export Citation Format

Share Document