The Direct Measurement of Ionic Piezoresistance

2015 ◽  
Vol 1730 ◽  
Author(s):  
Stuart N. Cook ◽  
Harry L. Tuller
Keyword(s):  
High Temperature ◽  
Ionic Conductivity ◽  
Solid Electrolytes ◽  
Strain State ◽  
Lattice Strain ◽  
Quantitative Measure ◽  
Ionic Conductors ◽  
Novel Technique ◽  
Conducting Materials ◽  
Fundamental Understanding

ABSTRACTIonic piezoresistance, the effect of lattice strain on ionic conductivity, is an important concept that needs to be harnessed to engineer the next generation of fast ionic conductors. To date there have been many reports of strain affecting changes in the level of ionic conductivity in solid electrolytes. The fundamental understanding is, however, still lacking, with limited experimental quantification of the magnitude of the effect. Here, we propose using the ionic piezoresistive coefficient, the constant of proportionality between the strain state and the change in conductivity, as a quantitative measure of this effect and detail a novel technique we have developed to quantify this in high temperature ionically conducting materials.

How Certain Are the Reported Ionic Conductivities of Thiophosphate-Based Solid Electrolytes? an Interlaboratory Study

2020 ◽  
Author(s):  
Saneyuki Ohno ◽  
Tim Bernges ◽  
Johannes Buchheim ◽  
Marc Duchardt ◽  
Anna-Katharina Hatz ◽  
...  
Keyword(s):  
Standard Deviation ◽  
Ionic Conductivity ◽  
Relative Standard Deviation ◽  
Solid Electrolytes ◽  
Ionic Conductivities ◽  
Ionic Conductors ◽  
Energy Storage Devices ◽  
Activation Barriers ◽  
Storage Devices ◽  
Relative Standard

<p>Owing to highly conductive solid ionic conductors, all-solid-state batteries attract significant attention as promising next-generation energy storage devices. A lot of research is invested in the search and optimization of solid electrolytes with higher ionic conductivity. However, a systematic study of an <i>interlaboratory reproducibility</i> of measured ionic conductivities and activation energies is missing, making the comparison of absolute values in literature challenging. In this study, we perform an uncertainty evaluation via a Round Robin approach using different Li-argyrodites exhibiting orders of magnitude different ionic conductivities as reference materials. Identical samples are distributed to different research laboratories and the conductivities and activation barriers are measured by impedance spectroscopy. The results show large ranges of up to 4.5 mScm<sup>-1</sup> in the measured total ionic conductivity (1.3 – 5.8 mScm<sup>-1</sup> for the highest conducting sample, relative standard deviation 35 – 50% across all samples) and up to 128 meV for the activation barriers (198 – 326 meV, relative standard deviation 5 – 15%, across all samples), presenting the necessity of a more rigorous methodology including further collaborations within the community and multiplicate measurements.</p>

Proton Conducting Solid Electrolytes for High Temperature Humidity Sensing

1992 ◽  
Vol 293 ◽  
Author(s):  
Martha Greenblatt ◽  
Shouhua Feng
Keyword(s):  
High Temperature ◽  
Ionic Conductivity ◽  
Solid Electrolytes ◽  
Ceramic Composite ◽  
Proton Conductors ◽  
Humidity Sensors ◽  
Emf Measurements ◽  
Humidity Sensing ◽  
Proton Conducting ◽  
Basic Characteristics

AbstractThe properties of various proton conducting solid electrolytes were investigated by electrochemical galvanic cell and ac impedance type measurements for applications as high temperature (T>200°C) humidity sensors. The basic characteristics of proton conductors required for humidity sensing are reviewed. Results of ionic conductivity and EMF measurements and their implications for the mechanism of ion transport are discussed for two prototype ceramic humidity sensors: β-Ca(PO3)2 and a NASICON-type ceramic composite, HZr2P3O12/ZrP2O7.

Theoretical prediction of a highly conducting solid electrolyte for sodium batteries: Na10GeP2S12

2015 ◽  
Vol 3 (24) ◽  
pp. 12992-12999 ◽  
Author(s):  
Vinay S. Kandagal ◽  
Mridula Dixit Bharadwaj ◽  
Umesh V. Waghmare
Keyword(s):  
High Temperature ◽  
Ionic Conductivity ◽  
Theoretical Prediction ◽  
Solid Electrolyte ◽  
Solid Electrolytes ◽  
State Of The Art ◽  
Sodium Batteries ◽  
Order Of Magnitude ◽  
Sodium Sulfur

The theoretically predicted compound Na10GeP2S12 exhibits Na-ionic conductivity of the same order of magnitude as that of other state-of-the-art solid electrolytes used in practical sodium batteries such as high-temperature sodium–sulfur batteries.

X-ray characterization of the new nasicon compositions Na3Zr2−x/4Si2−xP1+xO12 with x=0.333, 0.667, 1.000, 1.333, 1.667

1997 ◽  
Vol 12 (3) ◽  
pp. 171-174 ◽  
Author(s):  
M. Lucco-Borlera ◽  
D. Mazza ◽  
L. Montanaro ◽  
A. Negro ◽  
S. Ronchetti
Keyword(s):  
Ionic Conductivity ◽  
Solid Electrolytes ◽  
High Ionic Conductivity ◽  
Constant Number ◽  
Nasicon Structure ◽  
Ionic Conductors ◽  
X Ray ◽  
Octahedral Sites ◽  
First Time

It is known that solids with composition Na3Zr2Si2PO12 heated at 1200 °C crystallize in the nasicon structure. This material shows a high ionic conductivity that represents an interesting improvement in the field of solid electrolytes. Our experimental results allow to establish for the first time that nasicon structures are stable along the compositional join Na3Zr2−x/4Si2−xP1+xO12 with x extending from 0 to 1.667. These structures are characterized by a Zr underoccupation of octahedral sites and a constant number of Na+ ions. This fact envisages a possible application of these materials in the field of ceramic sensors and ionic conductors.

How Certain Are the Reported Ionic Conductivities of Thiophosphate-Based Solid Electrolytes? an Interlaboratory Study

2019 ◽  
Author(s):  
Saneyuki Ohno ◽  
Tim Bernges ◽  
Johannes Buchheim ◽  
Marc Duchardt ◽  
Anna-Katharina Hatz ◽  
...  
Keyword(s):  
Standard Deviation ◽  
Ionic Conductivity ◽  
Relative Standard Deviation ◽  
Solid Electrolytes ◽  
Ionic Conductivities ◽  
Ionic Conductors ◽  
Energy Storage Devices ◽  
Activation Barriers ◽  
Storage Devices ◽  
Relative Standard

<p>Owing to highly conductive solid ionic conductors, all-solid-state batteries attract significant attention as promising next-generation energy storage devices. A lot of research is invested in the search and optimization of solid electrolytes with higher ionic conductivity. However, a systematic study of an <i>interlaboratory reproducibility</i> of measured ionic conductivities and activation energies is missing, making the comparison of absolute values in literature challenging. In this study, we perform an uncertainty evaluation via a Round Robin approach using different Li-argyrodites exhibiting orders of magnitude different ionic conductivities as reference materials. Identical samples are distributed to different research laboratories and the conductivities and activation barriers are measured by impedance spectroscopy. The results show large ranges of up to 4.5 mScm<sup>-1</sup> in the measured total ionic conductivity (1.3 – 5.8 mScm<sup>-1</sup> for the highest conducting sample, relative standard deviation 35 – 50% across all samples) and up to 128 meV for the activation barriers (198 – 326 meV, relative standard deviation 5 – 15%, across all samples), presenting the necessity of a more rigorous methodology including further collaborations within the community and multiplicate measurements.</p>

scholarly journals How Certain Are the Reported Ionic Conductivities of Thiophosphate-Based Solid Electrolytes? an Interlaboratory Study

2020 ◽  
Author(s):  
Saneyuki Ohno ◽  
Tim Bernges ◽  
Johannes Buchheim ◽  
Marc Duchardt ◽  
Anna-Katharina Hatz ◽  
...  
Keyword(s):  
Standard Deviation ◽  
Ionic Conductivity ◽  
Relative Standard Deviation ◽  
Solid Electrolytes ◽  
Ionic Conductivities ◽  
Ionic Conductors ◽  
Energy Storage Devices ◽  
Activation Barriers ◽  
Storage Devices ◽  
Relative Standard

<p>Owing to highly conductive solid ionic conductors, all-solid-state batteries attract significant attention as promising next-generation energy storage devices. A lot of research is invested in the search and optimization of solid electrolytes with higher ionic conductivity. However, a systematic study of an <i>interlaboratory reproducibility</i> of measured ionic conductivities and activation energies is missing, making the comparison of absolute values in literature challenging. In this study, we perform an uncertainty evaluation via a Round Robin approach using different Li-argyrodites exhibiting orders of magnitude different ionic conductivities as reference materials. Identical samples are distributed to different research laboratories and the conductivities and activation barriers are measured by impedance spectroscopy. The results show large ranges of up to 4.5 mScm<sup>-1</sup> in the measured total ionic conductivity (1.3 – 5.8 mScm<sup>-1</sup> for the highest conducting sample, relative standard deviation 35 – 50% across all samples) and up to 128 meV for the activation barriers (198 – 326 meV, relative standard deviation 5 – 15%, across all samples), presenting the necessity of a more rigorous methodology including further collaborations within the community and multiplicate measurements.</p>

Defect-Mediated Conductivity Enhancements in Na3-xPn1-xWxS4 (Pn = P, Sb) using Aliovalent Substitutions

2019 ◽  
Author(s):  
Till Fuchs ◽  
Sean Culver ◽  
Paul Till ◽  
Wolfgang Zeier
Keyword(s):  
Ionic Conductivity ◽  
Vacancy Concentration ◽  
Sodium Ion ◽  
High Ionic Conductivity ◽  
Ionic Conductors ◽  
X Ray Diffraction ◽  
X Ray ◽  
Solid State Batteries ◽  
Ion Conducting ◽  
Very High

<p>The sodium-ion conducting family of Na<sub>3</sub><i>Pn</i>S<sub>4</sub>, with <i>Pn</i> = P, Sb, have gained interest for the use in solid-state batteries due to their high ionic conductivity. However, significant improvements to the conductivity have been hampered by the lack of aliovalent dopants that can introduce vacancies into the structure. Inspired by the need for vacancy introduction into Na<sub>3</sub><i>Pn</i>S<sub>4</sub>, the solid solutions with WS<sub>4</sub><sup>2-</sup> introduction are explored. The influence of the substitution with WS<sub>4</sub><sup>2-</sup> for PS<sub>4</sub><sup>3-</sup> and SbS<sub>4</sub><sup>3-</sup>, respectively, is monitored using a combination of X-ray diffraction, Raman and impedance spectroscopy. With increasing vacancy concentration improvements resulting in a very high ionic conductivity of 13 ± 3 mS·cm<sup>-1</sup> for Na<sub>2.9</sub>P<sub>0.9</sub>W<sub>0.1</sub>S<sub>4</sub> and 41 ± 8 mS·cm<sup>-1</sup> for Na<sub>2.9</sub>Sb<sub>0.9</sub>W<sub>0.1</sub>S<sub>4</sub> can be observed. This work acts as a stepping-stone towards further engineering of ionic conductors using vacancy-injection via aliovalent substituents.</p>

Defect-Mediated Conductivity Enhancements in Na3-xPn1-xWxS4 (Pn = P, Sb) using Aliovalent Substitutions

2019 ◽  
Author(s):  
Till Fuchs ◽  
Sean Culver ◽  
Paul Till ◽  
Wolfgang Zeier
Keyword(s):  
Ionic Conductivity ◽  
Vacancy Concentration ◽  
Sodium Ion ◽  
High Ionic Conductivity ◽  
Ionic Conductors ◽  
X Ray Diffraction ◽  
X Ray ◽  
Solid State Batteries ◽  
Ion Conducting ◽  
Very High

<p>The sodium-ion conducting family of Na<sub>3</sub><i>Pn</i>S<sub>4</sub>, with <i>Pn</i> = P, Sb, have gained interest for the use in solid-state batteries due to their high ionic conductivity. However, significant improvements to the conductivity have been hampered by the lack of aliovalent dopants that can introduce vacancies into the structure. Inspired by the need for vacancy introduction into Na<sub>3</sub><i>Pn</i>S<sub>4</sub>, the solid solutions with WS<sub>4</sub><sup>2-</sup> introduction are explored. The influence of the substitution with WS<sub>4</sub><sup>2-</sup> for PS<sub>4</sub><sup>3-</sup> and SbS<sub>4</sub><sup>3-</sup>, respectively, is monitored using a combination of X-ray diffraction, Raman and impedance spectroscopy. With increasing vacancy concentration improvements resulting in a very high ionic conductivity of 13 ± 3 mS·cm<sup>-1</sup> for Na<sub>2.9</sub>P<sub>0.9</sub>W<sub>0.1</sub>S<sub>4</sub> and 41 ± 8 mS·cm<sup>-1</sup> for Na<sub>2.9</sub>Sb<sub>0.9</sub>W<sub>0.1</sub>S<sub>4</sub> can be observed. This work acts as a stepping-stone towards further engineering of ionic conductors using vacancy-injection via aliovalent substituents.</p>

Characterization of New Ionically Conducting Peo-Based Networks by Diffusion, Elasticity Modulus and Ionic Conductivity Measurements

1992 ◽  
Vol 293 ◽  
Author(s):  
Herve Cheradame ◽  
F. Desbat ◽  
P. Mercier-Niddam ◽  
S. Boileau
Keyword(s):  
Diffusion Coefficient ◽  
Ionic Conductivity ◽  
Elasticity Modulus ◽  
Sol Gel ◽  
Cation Transport ◽  
Lithium Cation ◽  
Conductivity Measurements ◽  
Conducting Materials ◽  
Diffusion Studies

AbstractIonically conducting materials containing PEO were prepared from telechelic di(methyl-diethoxy-silane) PEO, synthesized by the hydrosilylation of telechelic diallyl-PEO with methyldiethoxysilane. The network is obtained by the usual sol-gel chemistry. Then, it is filled with LiClO4 by diffusion of the salt and further drying. A comparison is made with the same kind of materials crosslinked using urethane chemistry. Diffusion studies show that the diffusion coefficient of solvent is similar for both types of materials, whilst the ionic conductivity is higher for the networks crosslinked with siloxane bonds. An experiment of diffusion of LiClO4 without solvent showed that this salt has a diffusion coefficient of the order of 2.10-8 cm2.sec-1 at 34°C. The conductivity calculated from this determination is compatible with the mechanism of lithium cation transport by the diffusion of salt molecules. Elasticity modulus measurements show that the salt aggregates are essentially located within the crosslinks at low concentration, but also in the PEO chains for salt concentrations higher than 1 mol/l.

Sign in / Sign up

Export Citation Format

Share Document