Electron Dynamics of Solvated Ti(OH)4

2014 ◽  
Vol 1647 ◽  
Author(s):  
Dayton J. Vogel ◽  
Dmitri S. Kilin
Keyword(s):  
Density Functional ◽  
Computational Study ◽  
Geometry Optimization ◽  
Building Blocks ◽  
Basis Set ◽  
Synthesis Methods ◽  
Electron Dynamics ◽  
Relaxation Rates ◽  
Electron Hole ◽  
Ambient Temperatures

ABSTRACTIncreasing interest in the photocatalytic activity of TiO2 has led to considerations of using TiO2 nanoparticles in energy generation. In order to better understand the electron-hole relaxation of nano scale TiO2 structures, it is important to start with an understanding of TiO2 synthesis building blocks. The solvated titanium (IV) ion is a precursor found in synthesis methods of colloidal TiO2 nanostructures. This simplest test compound may reflect some common basic electronic features for larger structures composed of Ti(IV) coordinated with oxygen. For this computational study, a model of Ti(OH)4 with tetrahedral coordination was created. To simulate the electronic properties of a solution of Ti(IV), the model was surrounded with 27 H2O molecules. The model was explored by means of standard density functional theory (DFT) molecular dynamics (MD) followed by nonadiabatic electron dynamics computed with Reduced Density Matrix approach combined with “on-the-fly coupling”. Results were generated with Vienna ab initio Simulation Package (VASP) using the Perdew-Burke-Ernzerhof (PBE) functional, plane wave basis set, and projector augmented wave (PAW) potentials. The absorption spectra, MD, and electron-hole relaxation rates are presented for the Ti(OH)4 model at various ambient temperatures. The electron-hole relaxation rates show a non-linear dependence on temperature and were found to be near the same order of magnitude as electron-hole relaxation rates in bulk TiO2 calculations. A video of the geometry optimization can be found online.[1]

scholarly journals Computational Study of the Electron Spectra of Vapor-Phase Indole and Four Azaindoles

Molecules ◽  
2021 ◽  
Vol 26 (7) ◽  
pp. 1947
Author(s):  
Delano P. Chong
Keyword(s):  
Density Functional Theory ◽  
Vapor Phase ◽  
Density Functional ◽  
Computational Study ◽  
Geometry Optimization ◽  
The Other ◽  
Functional Theory ◽  
Electron Spectra

After geometry optimization, the electron spectra of indole and four azaindoles are calculated by density functional theory. Available experimental photoemission and excitation data for indole and 7-azaindole are used to compare with the theoretical values. The results for the other azaindoles are presented as predictions to help the interpretation of experimental spectra when they become available.

scholarly journals Density Functional Theory and Complete Basis Set Ab Initio Computational Study of Five-, Six-, Seven- and Eight-hydrogen Coordinated Carbon Cations

1999 ◽  
Vol 23 (8) ◽  
pp. 502-503
Author(s):  
Branko S. Jursic
Keyword(s):  
Density Functional Theory ◽  
Ab Initio ◽  
Density Functional ◽  
Computational Study ◽  
Basis Set ◽  
Functional Theory ◽  
Complete Basis ◽  
Complete Basis Set ◽  
High Level

High level ab initio and density functional theory studies are performed on highly protonated methane species.

scholarly journals Distinctive Supramolecular Features of β-Cyclodextrin Inclusion Complexes with Antidepressants Protriptyline and Maprotiline: A Comprehensive Structural Investigation

2021 ◽  
Vol 14 (8) ◽  
pp. 812
Author(s):  
Thammarat Aree
Keyword(s):  
Inclusion Complexes ◽  
Density Functional ◽  
Water Solubility ◽  
Geometry Optimization ◽  
Binding Constants ◽  
Basis Set ◽  
Full Geometry Optimization ◽  
Basis Set Superposition Error ◽  
X Ray ◽  
Molecular Stability

Depression, a global mental illness, is worsened due to the coronavirus disease 2019 (COVID-2019) pandemic. Tricyclic antidepressants (TCAs) are efficacious for the treatment of depression, even though they have more side effects. Cyclodextrins (CDs) are powerful encapsulating agents for improving molecular stability, water solubility, and lessening the undesired effects of drugs. Because the atomic-level understanding of the β-CD–TCA inclusion complexes remains elusive, we carried out a comprehensive structural study via single-crystal X-ray diffraction and density functional theory (DFT) full-geometry optimization. Here, we focus on two complexes lining on the opposite side of the β-CD–TCA stability spectrum based on binding constants (Kas) in solution, β-CD–protriptyline (PRT) 1—most stable and β-CD–maprotiline (MPL) and 2—least stable. X-ray crystallography unveiled that in the β-CD cavity, the PRT B-ring and MPL A-ring are aligned at a nearly perfect right angle against the O4 plane and primarily maintained in position by intermolecular C–H···π interactions. The increased rigidity of the tricyclic cores is arising from the PRT -CH=CH- bridge widens, and the MPL -CH2–CH2- flexure narrows the butterfly angles, facilitating the deepest and shallower insertions of PRT B-ring (1) and MPL A-ring (2) in the distorted round β-CD cavity for better complexation. This is indicated by the DFT-derived complex stabilization energies (ΔEstbs), although the complex stability orders based on Kas and ΔEstbs are different. The dispersion and the basis set superposition error (BSSE) corrections were considered to improve the DFT results. Plus, the distinctive 3D arrangements of 1 and 2 are discussed. This work provides the first crystallographic evidence of PRT and MPL stabilized in the β-CD cavity, suggesting the potential application of CDs for efficient drug delivery.

A density functional approach toward structural features and properties of C20…N2X2 (X = H, F, Cl, Br, Me) molecules

2014 ◽  
Vol 13 (04) ◽  
pp. 1450023 ◽  
Author(s):  
Reza Ghiasi ◽  
Morteza Zaman Fashami ◽  
Amir Hossein Hakimioun
Keyword(s):  
Density Functional ◽  
Chemical Shifts ◽  
Geometry Optimization ◽  
Structural Features ◽  
Nbo Analysis ◽  
Basis Set ◽  
Basis Sets ◽  
Basis Set Superposition Error ◽  
Homo And Lumo ◽  
Lowest Unoccupied Molecular Orbitals

In this work, the interaction of C 20 with N 2 X 2 ( X = H , F , Cl , Br , Me ) molecules has been explored using the B3LYP, M062x methods and 6-311G(d,p) and 6-311+G(d,p) basis sets. The interaction energies (IEs) obtained with standard method were corrected by basis set superposition error (BSSE) during the geometry optimization for all molecules at the same levels of theory. It was found C 20… N 2 H 2 interaction is stronger than the interaction of other N 2 X 2 ( X = F , Cl , Br , Me ) with C 20. Highest occupied and lowest unoccupied molecular orbitals (HOMO and LUMO, respectively) levels are illustrated by density of states spectra (DOS). The nucleus-independent chemical shifts (NICSs) confirm that C 20… N 2 X 2 molecules exhibit aromatic characteristics. Geometries obtained from DFT calculations were used to perform NBO analysis. Also, 14 N NQR parameters of the C 20… N 2 X 2 molecules are predicted.

Computational study of polarizability anisotropies

2018 ◽  
Vol 96 (10) ◽  
pp. 934-938
Author(s):  
Delano P. Chong
Keyword(s):  
Small Molecules ◽  
Density Functional ◽  
Computational Study ◽  
Chem Phys ◽  
Basis Set ◽  
Functional Theory ◽  
Exchange Correlation ◽  
Exchange Correlation Potential ◽  
Correlation Potential ◽  
Definition Of

The dipole polarizabilities (α) and polarizability anisotropies (Δα) of over 20 molecules are calculated to search for negative Δα. The geometry of each molecule is first optimized at the level of CCSD(T)/cc-pVQZ. Then, the α tensors are computed both with CCSD(T)/daug-cc-pVTZ in Gaussian 09 and with the exchange-correlation potential Vxc known as SAOP in the Amsterdam density functional theory program called ADF and a large basis set called QZ3P-3DIFFUSE. In addition to the popular formula of the ΔαRaman connected with Raman spectroscopy, we also present values of an alternative definition of the polarizability anisotropy ΔαKerr connected with Kerr spectroscopy, recently proposed by Kampfrath and colleagues (2018. Chem. Phys. Lett. 692: 319). On one hand, the signs of many ΔαRaman are undetermined; on the other hand, we obtain negative ΔαKerr for more than one-half of the small molecules studied. Of the 24 molecules studied, 18 have negative ΔαKerr.

scholarly journals Study on the CO Formation Mechanism during Coal Ambient Temperature Oxidation

Energies ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2587
Author(s):  
Shuo Liu ◽  
Yuguo Wu ◽  
Chunshan Zhou ◽  
Jianming Wu ◽  
Yulong Zhang
Keyword(s):  
Density Functional Theory ◽  
Ambient Temperature ◽  
Density Functional ◽  
Basis Set ◽  
Functional Theory ◽  
Temperature Oxidation ◽  
Ambient Temperatures ◽  
Mechanical Approach ◽  
Aldehyde Groups ◽  
Quantum Mechanical Approach

The CO formation rules of coal were analyzed by a self-developed testing device under ambient temperature. The changes of functional groups caused by oxidation were obtained using Fourier-transform infrared spectroscopy (FTIR). The experimental results showed that CO was generated during the ambient temperature oxidation. The highest concentration level of CO could be 389 ppm. The methylene and aldehyde groups on the side chains were involved in the reaction. For the quantum mechanical approach, we employed the density functional theory with the 6–31 G (d, p) basis set. Density functional theory–based computations interpreted the possible reaction sites on a coal molecule by electronic static potential analysis. The rationality of the predicted reactions was also evaluated by transition state analysis and energy analysis. This research theoretically proved that coal could be oxidized to carbon monoxide under ambient temperatures and gave the possible reaction paths.

scholarly journals Structure, electronic properties, NBO, NLO and chemi-cal reactivity of bis (1, 4-dithiafulvalene) derivatives: functional density theory study

2017 ◽  
Vol 6 (1) ◽  
pp. 18
Author(s):  
Tahar Abbaz ◽  
Amel Bendjeddou ◽  
Didier Villemin
Keyword(s):  
Electronic Properties ◽  
Density Functional ◽  
Computational Study ◽  
Molecular Geometry ◽  
Basis Set ◽  
Frontier Molecular Orbital ◽  
Reactivity Descriptors ◽  
Nlo Property ◽  
Functional Density Theory ◽  
Nucleophilic Reactivity

In this work, through computational study based on density functional theory (DFT/B3LYP) using basis set 6-31G (d,p) a number of global and local reactivity descriptors for a series of molecules containing a TTF function which are bis (1,4-dithiafulvalene) derivatives. They were computed to predict the reactivity and the reactive sites on the molecules. The molecular geometry and the electronic properties in the ground state such as frontier molecular orbital (HOMO and LUMO), ionization potential (I) and electron affinity (A) were investigated to get a better insight of the molecular properties. Molecular electrostatic potential (MEP) for all compounds were determined to check their electrophilic or nucleophilic reactivity. Fukui index, polarizability, hyperpolarizability, second order NLO property and natural bond orbital (NBO) analyses have also employed to determine the reactivity of bis (1,4-dithiafulvalene) derivatives.

Homolytic bond-dissociation enthalpies of tin bonds and tin–ligand bond strengths — A computational study

2009 ◽  
Vol 87 (7) ◽  
pp. 974-983 ◽  
Author(s):  
Sarah R. Whittleton ◽  
Russell J. Boyd ◽  
T. Bruce Grindley
Keyword(s):  
Density Functional ◽  
Computational Study ◽  
Basis Set ◽  
Functional Theory ◽  
Bond Dissociation ◽  
Donor Acceptor ◽  
Bond Strengths ◽  
Moller Plesset ◽  
Effective Core Potentials ◽  
Ligand Bond

Density functional theory and second-order Møller–Plesset perturbation theory with effective core potentials have been used to calculate homolytic bond-dissociation enthalpies, D(Sn–X), of organotin compounds, and their performance has been assessed by comparison with available experimental bond enthalpies. The SDB-aug-cc-pVTZ basis set with its effective core potential was used to calculate the D(Sn–X) of a series of trimethyltin(IV) species, Me3Sn–X, where X = H, CH3, CH2CH3, NH2, OH, Cl, and F. This is the most comprehensive report to date of homolytic Sn–X bond-dissociation enthalpies (BDEs). Effective core potentials are then used to calculate thermodynamic parameters including donor–acceptor bond enthalpies, [Formula: see text], for a series of tin-ligand complexes, L2SnX4 (X = Br or Cl, L = py, dmf, or dmtf), which are compared with previous experimental and nonrelativistic computational results. Based on computational efficiency and accuracy, it is concluded that effective core potentials are appropriate computational methods to examine bonding in organotin systems.

Sign in / Sign up

Export Citation Format

Share Document