Optically transparent graphene nanoplatelet inks as low cost electrocatalysts for liquid dye sensitised solar cells

2014 ◽  
Vol 1667 ◽  
Author(s):  
J. Baker ◽  
T.M. Watson ◽  
D. Jones ◽  
D. Deganello ◽  
D.T. Gethin ◽  
...  
Keyword(s):  
Solar Cells ◽  
High Efficiency ◽  
Low Cost ◽  
Active Material ◽  
Charge Transfer Resistance ◽  
High Specific Surface Area ◽  
Light Conditions ◽  
Transfer Resistance ◽  
Test Conditions ◽  
A Charge

ABSTRACTGraphene nanoplatelets (GNPs) functionalised with platinum were explored as the active material in a high specific surface area ink. The ink had a transmission at 550nm (T550) = 85% and a charge transfer resistance (Rct) of 6Ω/cm2. Although the Rct is higher than required for laboratory cells having a Jsc of 20mA/cm2 under 1 sun test conditions it is sufficient for industrially produced reverse devices, especially when utilised for indoor applications where light conditions will be lower than 100W/m2. This was demonstrated by reverse illuminated DSC efficiencies with flexible cathodes which were equivalent to cells with sputtered platinum catalysts when subjected to 300W/m2 lighting or less. A modification to the ink, suitable for catalysing a Co2+/3+ electrolyte having an Rct of 2Ω/cm2 and T550= 85% was undertaken. This demonstrates potential for use in high efficiency cobalt mediated DSCs. The work shows that printed graphene catalysts are a versatile low cost replacement to sputtered platinum in reverse illuminated DSCs for dye sensitised solar cells.

Improvement of Ti/RuO2–IrO2 Anode Lifetime and Electrocatalytical Properties by Using an Eco-Friendly Thermal Decomposition Method Using Polyvinyl Alcohol as Solvent

2019 ◽  
Author(s):  
Charlys Bezerra ◽  
Géssica Santos ◽  
Marilia Pupo ◽  
Maria Gomes ◽  
Ronaldo Silva ◽  
...  
Keyword(s):  
Thermal Decomposition ◽  
Polyvinyl Alcohol ◽  
High Efficiency ◽  
Electrochemical Impedance ◽  
Pechini Method ◽  
Low Cost ◽  
Charge Transfer Resistance ◽  
Transfer Resistance ◽  
Calcination Temperatures ◽  
Service Lifetime

<p>Electrochemical oxidation processes are promising solutions for wastewater treatment due to their high efficiency, easy control and versatility. Mixed metal oxides (MMO) anodes are particularly attractive due to their low cost and specific catalytic properties. Here, we propose an innovative thermal decomposition methodology using <a>polyvinyl alcohol (PVA)</a> as a solvent to prepare Ti/RuO<sub>2</sub>–IrO<sub>2</sub> anodes. Comparative anodes were prepared by conventional method employing a polymeric precursor solvent (Pechini method). The calcination temperatures studied were 300, 400 and 500 °C. The physical characterisation of all materials was performed by X-ray diffraction and scanning electron microscopy coupled with energy dispersive spectroscopy, while electrochemical characterisation was done by cyclic voltammetry, accelerated service lifetime and electrochemical impedance spectroscopy. Both RuO<sub>2</sub> and IrO<sub>2</sub> have rutile-type structures for all anodes. Rougher and more compact surfaces are formed for the anodes prepared using PVA. Amongst temperatures studied, 300 °C using PVA as solvent is the most suitable one to produce anodes with expressive increase in voltammetric charge (250%) and accelerated service lifetime (4.3 times longer) besides reducing charge-transfer resistance (8 times lower). Moreover, the electrocatalytic activity of the anodes synthesised with PVA toward the Reactive Blue 21 dye removal in chloride medium (100 % in 30 min) is higher than that prepared by Pechini method (60 min). Additionally, the removal total organic carbon point out improved mineralisation potential of PVA anodes. Finally, this study reports a novel methodology using PVA as solvent to synthesise Ti/RuO<sub>2</sub>–IrO<sub>2</sub> anodes with improved properties that can be further extended to synthesise other MMO compositions.</p>

scholarly journals Low-Cost and Efficient Nickel Nitroprusside/Graphene Nanohybrid Electrocatalysts as Counter Electrodes for Dye-Sensitized Solar Cells

Materials ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 6563
Author(s):  
Md. Mahbubur Rahman
Keyword(s):  
Solar Cells ◽  
Low Cost ◽  
Photovoltaic Performance ◽  
Dye Sensitized Solar Cells ◽  
Solution Process ◽  
Charge Transfer Resistance ◽  
Counter Electrodes ◽  
Transfer Resistance ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

Novel nickel nitroprusside (NNP) nanoparticles with incorporated graphene nanoplatelets (NNP/GnP) were used for the first time as a low-cost and effective counter electrode (CE) for dye-sensitized solar cells (DSSCs). NNP was synthesized at a low-temperature (25 °C) solution process with suitable purity and crystallinity with a size range from 5 to 10 nm, as confirmed by different spectroscopic and microscopic analyses. The incorporation of an optimized amount of GnP (0.2 wt%) into the NNP significantly improved the electrocatalytic behavior for the redox reaction of iodide (I-)/tri-iodide (I3-) by decreasing the charge-transfer resistance at the CE/electrolyte interface, lower than the NNP- and GnP-CEs, and comparable to the Pt-CE. The NNP/GnP nanohybrid CE when applied in DSSC exhibited a PCE of 6.13% (under one sun illumination conditions) with the Jsc, Voc, and FF of 14.22 mA/cm2, 0.628 V, and 68.68%, respectively, while the PCE of the reference Pt-CE-based DSSC was 6.37% (Jsc = 14.47 mA/cm2, Voc = 0.635 V, and FF = 69.20%). The low cost of the NNP/GnP hybrid CE with comparable photovoltaic performance to Pt-CE can be potentially exploited as a suitable replacement of Pt-CE in DSSCs.

Improvement of Ti/RuO2–IrO2 Anode Lifetime and Electrocatalytical Properties by Using an Eco-Friendly Thermal Decomposition Method Using Polyvinyl Alcohol as Solvent

2019 ◽  
Author(s):  
Charlys Bezerra ◽  
Géssica Santos ◽  
Marilia Pupo ◽  
Maria Gomes ◽  
Ronaldo Silva ◽  
...  
Keyword(s):  
Thermal Decomposition ◽  
Polyvinyl Alcohol ◽  
High Efficiency ◽  
Electrochemical Impedance ◽  
Pechini Method ◽  
Low Cost ◽  
Charge Transfer Resistance ◽  
Transfer Resistance ◽  
Calcination Temperatures ◽  
Service Lifetime

<p>Electrochemical oxidation processes are promising solutions for wastewater treatment due to their high efficiency, easy control and versatility. Mixed metal oxides (MMO) anodes are particularly attractive due to their low cost and specific catalytic properties. Here, we propose an innovative thermal decomposition methodology using <a>polyvinyl alcohol (PVA)</a> as a solvent to prepare Ti/RuO<sub>2</sub>–IrO<sub>2</sub> anodes. Comparative anodes were prepared by conventional method employing a polymeric precursor solvent (Pechini method). The calcination temperatures studied were 300, 400 and 500 °C. The physical characterisation of all materials was performed by X-ray diffraction and scanning electron microscopy coupled with energy dispersive spectroscopy, while electrochemical characterisation was done by cyclic voltammetry, accelerated service lifetime and electrochemical impedance spectroscopy. Both RuO<sub>2</sub> and IrO<sub>2</sub> have rutile-type structures for all anodes. Rougher and more compact surfaces are formed for the anodes prepared using PVA. Amongst temperatures studied, 300 °C using PVA as solvent is the most suitable one to produce anodes with expressive increase in voltammetric charge (250%) and accelerated service lifetime (4.3 times longer) besides reducing charge-transfer resistance (8 times lower). Moreover, the electrocatalytic activity of the anodes synthesised with PVA toward the Reactive Blue 21 dye removal in chloride medium (100 % in 30 min) is higher than that prepared by Pechini method (60 min). Additionally, the removal total organic carbon point out improved mineralisation potential of PVA anodes. Finally, this study reports a novel methodology using PVA as solvent to synthesise Ti/RuO<sub>2</sub>–IrO<sub>2</sub> anodes with improved properties that can be further extended to synthesise other MMO compositions.</p>

scholarly journals Ruthenium Sensitizers and Their Applications in Dye-Sensitized Solar Cells

2012 ◽  
Vol 2012 ◽  
pp. 1-21 ◽  
Author(s):  
Yuancheng Qin ◽  
Qiang Peng
Keyword(s):  
Solar Cells ◽  
High Efficiency ◽  
Low Cost ◽  
Dye Sensitized Solar Cells ◽  
Ruthenium Complexes ◽  
Practical Applications ◽  
Photovoltaic Energy ◽  
Dye Sensitized ◽  
Sensitized Solar Cells ◽  
Excellent Stability

Dye-sensitized solar cells (DSSCs) have attracted considerable attention in recent years due to the possibility of low-cost conversion of photovoltaic energy. The DSSCs-based ruthenium complexes as sensitizers show high efficiency and excellent stability, implying potential practical applications. This review focuses on recent advances in design and preparation of efficient ruthenium sensitizers and their applications in DSSCs, including thiocyanate ruthenium sensitizers and thiocyanate-free ruthenium sensitizers.

scholarly journals Photoenergy: Progress in Si-Related Solar Cells for a Low Cost and High Efficiency

2012 ◽  
Vol 2012 ◽  
pp. 1-1 ◽  
Author(s):  
J. Yi ◽  
Eicke R. Weber ◽  
C. W. Lan ◽  
Stephen Bremner ◽  
D. H. Kim
Keyword(s):  
Solar Cells ◽  
High Efficiency ◽  
Low Cost

Antimony trifluoride incorporated SnO2 for high-efficiency planar perovskite solar cells

2021 ◽  
Author(s):  
Li Zhang ◽  
Hui Li ◽  
Jing Zhuang ◽  
Yigang Luan ◽  
Sixuan Wu ◽  
...  
Keyword(s):  
Solar Cells ◽  
Electron Transport ◽  
Tin Dioxide ◽  
High Efficiency ◽  
Low Cost ◽  
Perovskite Solar Cells ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Antimony Trifluoride ◽  
First Time

The low-cost material antimony trifluoride (SbF3) was doped into the commonly used tin dioxide (SnO2) for the first time, and the SbF3-doped SnO2 as an electron transport layer (ETL) was...

Sign in / Sign up

Export Citation Format

Share Document