Provenance and Manufacture of Mixtec Style Objects Found on the Surrounding Structures of the Precinct of the Great Temple of Tenochtitlan

2014 ◽  
Vol 1618 ◽  
pp. 121-127
Author(s):  
Reyna B. Solís Ciriaco Ciriaco ◽  
José L. Ruvalcaba Sil
Keyword(s):  
Infrared Spectroscopy ◽  
Manufacturing Process ◽  
Raw Materials ◽  
Raw Material ◽  
Composition Analysis ◽  
Luxury Goods ◽  
X Ray ◽  
Serpentine Mineral ◽  
Apparent Similarity

ABSTRACTSeventy six speckled greenstone items have been recovered on the surrounding structures of the Aztec precinct of the Great Temple of Tenochtitlan. Several researchers have identified the material as marble. Also, these objects have been labeled as Mixtec style due to the raw materials involved in their manufacture as well as their apparent similarity with other known Mixtec objects. The main objective of this essay is to determine the raw materials and the technology employed on its manufacture. Based on earlier composition analysis using Infrared spectroscopy (FTIR) and X-ray Fluorescence (XRF), it became clear that all items are made of the same calcite-serpentine mineral alloy, which probably comes from the Oaxaca region. It is interesting the homogeneity and standardization among these pieces by analyzing them with experimental archaeology and the characterization of their manufacturing traces. Comparing their raw material, morphology and techniques with those of Mixtec sites, the analysis revealed that they are not in fact related at all; however they do coincide with the manufacturing process of Tenochca (Aztec) style objects. This fact might point towards the actual origin of the raw materials, their obtainment and the technology behind the elaboration of luxury goods at Tenochtitlan.

Quality Characterization of Iron Dust Exhaust Thermal as Alternative Ceramic Coating Raw Materials in a Brazilian Company

2014 ◽  
Vol 1077 ◽  
pp. 135-138
Author(s):  
Luiz Oliveira Veriano dalla Valentina ◽  
Marilena Valadares Folgueras ◽  
Wanessa Rejane Knop ◽  
Maria Cristina Pacheco do Nascimento ◽  
Glaucia Aparecida Prates
Keyword(s):  
Ceramic Coating ◽  
Raw Materials ◽  
Ceramic Materials ◽  
Raw Material ◽  
Silica Sand ◽  
Commercial Application ◽  
X Ray Diffraction ◽  
X Ray ◽  
Materials Used

As the raw materials used in the ceramic materials manufacturing are natural, it is important to use them as a alternative materials, thus decreasing the elements demand taken from nature. This paper aims the characterization of foundry solid powder exhaust from a brazilian company located in Joinville - SC as an alternative raw material for ceramic coating by X-ray diffraction (XRD), thermal analysis (DSC) and thermogravimetric (TG). The dust depletion is caused in the manufacturing mold sand process, when the bentonita (clay), silica sand and coal during the metal parts production are mixed in green sand production. The raw materials were characterized through X-ray diffraction (XRD), thermal (DSC) and thermogravimetric analisys (TG). The atomized powder thermogravimetric analysis curve shows three intervals associated with the mass loss and it is typical of clay commercial application.

scholarly journals Characterization of Limestone as Raw Material to Hydrated Lime

2018 ◽  
Vol 34 ◽  
pp. 02042 ◽  
Author(s):  
Rajeb Salem Hwidi ◽  
Tengku Nuraiti Tengku Izhar ◽  
Farah Naemah Mohd Saad
Keyword(s):  
Raw Materials ◽  
Hydrated Lime ◽  
Raw Material ◽  
Morphological Properties ◽  
X Ray Diffraction ◽  
Absorption Bands ◽  
X Ray ◽  
Main Chemical Composition ◽  
The Difference

In Malaysia, limestone is essentially important for the economic growth as raw materials in the industry sector. Nevertheless, a little attention was paid to the physical, chemical, mineralogical, and morphological properties of the limestone using X-ray fluorescence (X-RF), X-ray diffraction (X-RD), Fourier transform infrared spectroscopy (FTIR), and Scanning electron microscopy / energy dispersive x-ray spectroscopy (SEM-EDS) respectively. Raw materials (limestone rocks) were collected from Bukit Keteri area, Chuping, Kangar, Perlis, Malaysia. Lab crusher and lab sieved were utilized to prepare five different size of ground limestone at (75 µm, 150 µm, 225 µm, 300, and 425 µm) respectively. It is found that the main chemical composition of bulk limestone was Calcium oxide (CaO) at 97.58 wt.% and trace amount of MnO, Al2O3, and Fe2O3 at 0.02%, 0.35%, and 0.396% respectively. XRD diffractograms showed characteristic peaks of calcite and quartz. Furthermore, main FTIR absorption bands at 1,419, 874.08 and 712.20 cm-1 indicated the presence of calcite. The micrographs showed clearly the difference of samples particle size. Furthermore, EDS peaks of Ca, O, and C elements confirmed the presence of CaCO3 in the samples.

Development and Characterization of Al2O3-ZrO2 Composites Using ZrO2(Y2O3)-Recycled as Raw Material

2018 ◽  
Vol 912 ◽  
pp. 124-129
Author(s):  
Caio Marcelo Felbinger Azevedo Cossu ◽  
Manuel Fellipe Rodrigues Pais Alves ◽  
Luiz Cláudio Lemos de Assis ◽  
Roberto de Oliveira Magnago ◽  
José Vitor Candido de Souza ◽  
...  
Keyword(s):  
Fracture Toughness ◽  
Relative Density ◽  
Raw Materials ◽  
Ceramic Composites ◽  
Raw Material ◽  
X Ray Diffraction ◽  
X Ray ◽  
Dental Prostheses ◽  
Scanning Electron

The objective of this work was the development of Al2O3-ZrO2 ceramic composites using recycled-source of ZrO2(Y2O3). Al2O3 powder was mixed with different proportions of ZrO2(Y2O3) arising from pre-sintered blocks used in dental prostheses manufacturing. The mixtures containing 3wt% to 15wt% ZrO2(Y2O3) were uniaxially pressed at 80MPa and sintered at 1600°C-2h. Raw materials and sintered samples were characterized by X-ray diffraction, scanning electron microscopy (SEM), relative density, hardness and fracture toughness. The results of X-ray diffraction showed α-Al2O3 and tetragonal-ZrO2 as crystalline phases after sintering. Furthermore, the relative density in all compositions was higher than 95%. The samples presented Vickers hardness and fracture toughness higher than 1300HV and 3.5MPa. m1/2, respectively.

scholarly journals A Methodology Based on FT-IR Data Combined with Random Forest Model to Generate Spectralprints for the Characterization of High-Quality Vinegars

Foods ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 1411
Author(s):  
José Luis P. Calle ◽  
Marta Ferreiro-González ◽  
Ana Ruiz-Rodríguez ◽  
Gerardo F. Barbero ◽  
José Á. Álvarez ◽  
...  
Keyword(s):  
Random Forest ◽  
Raw Materials ◽  
Principal Component ◽  
Hierarchical Cluster ◽  
Raw Material ◽  
Support Vector ◽  
Protected Designation Of Origin ◽  
Ft Ir

Sherry wine vinegar is a Spanish gourmet product under Protected Designation of Origin (PDO). Before a vinegar can be labeled as Sherry vinegar, the product must meet certain requirements as established by its PDO, which, in this case, means that it has been produced following the traditional solera and criadera ageing system. The quality of the vinegar is determined by many factors such as the raw material, the acetification process or the aging system. For this reason, mainly producers, but also consumers, would benefit from the employment of effective analytical tools that allow precisely determining the origin and quality of vinegar. In the present study, a total of 48 Sherry vinegar samples manufactured from three different starting wines (Palomino Fino, Moscatel, and Pedro Ximénez wine) were analyzed by Fourier-transform infrared (FT-IR) spectroscopy. The spectroscopic data were combined with unsupervised exploratory techniques such as hierarchical cluster analysis (HCA) and principal component analysis (PCA), as well as other nonparametric supervised techniques, namely, support vector machine (SVM) and random forest (RF), for the characterization of the samples. The HCA and PCA results present a clear grouping trend of the vinegar samples according to their raw materials. SVM in combination with leave-one-out cross-validation (LOOCV) successfully classified 100% of the samples, according to the type of wine used for their production. The RF method allowed selecting the most important variables to develop the characteristic fingerprint (“spectralprint”) of the vinegar samples according to their starting wine. Furthermore, the RF model reached 100% accuracy for both LOOCV and out-of-bag (OOB) sets.

Characterization and A Preliminary Study of TiO2 Synthesis from Lampung Iron Sand

2020 ◽  
Vol 849 ◽  
pp. 113-118
Author(s):  
Yayat Iman Supriyatna ◽  
Slamet Sumardi ◽  
Widi Astuti ◽  
Athessia N. Nainggolan ◽  
Ajeng W. Ismail ◽  
...  
Keyword(s):  
Food Packaging ◽  
Xrd Analysis ◽  
Major Elements ◽  
Raw Material ◽  
Solid Residue ◽  
X Ray Diffraction ◽  
X Ray ◽  
Leaching Solution ◽  
Ti Content

The purpose of this study is to characterize Lampung iron sand and to conduct preliminary experiments on the TiO2 synthesis which can be used for the manufacturing of functional food packaging. The iron sand from South Lampung Regency, Lampung Province that will be utilized as raw material. The experiment was initiated by sieving the iron sand on 80, 100, 150, 200 and 325 mesh sieves. Analysis using X-Ray Fluorescence (XRF) to determine the element content and X-Ray Diffraction (XRD) to observe the mineralization of the iron sand was conducted. The experiment was carried out through the stages of leaching, precipitation, and calcination. Roasting was applied firstly by putting the iron sand into the muffle furnace for 5 hours at a temperature of 700°C. Followed by leaching using HCl for 48 hours and heated at 105°C with a stirring speed of 300 rpm. The leaching solution was filtered with filtrate and solid residue as products. The solid residue was then leached using 10% H2O2 solution. The leached filtrate was heated at 105°C for 40 minutes resulting TiO2 precipitates (powder). Further, the powder was calcined and characterized. Characterization of raw material using XRF shows the major elements of Fe, Ti, Mg, Si, Al and Ca. The highest Ti content is found in mesh 200 with 9.6%, while iron content is about 80.7%. While from the XRD analysis, it shows five mineral types namely magnetite (Fe3O4), Rhodonite (Mn, Fe, Mg, Ca) SiO3, Quart (SiO2), Ilmenite (FeOTiO2) and Rutile (TiO2). The preliminary experiment showed that the Ti content in the synthesized TiO2 powder is 21.2%. The purity of TiO2 is low due to the presence of Fe metal which is dissolved during leaching, so that prior to precipitation purification is needed to remove impurities such as iron and other metals.

Preliminary Study of Alginates Extracted from Brown Algae (Sargassum sp.) Available in Madura Island as Composite Based Hydrogel Materials

2019 ◽  
Vol 964 ◽  
pp. 240-245 ◽  
Author(s):  
Amaliya Rasyida ◽  
Thalyta Rizkha Pradipta ◽  
Sigit Tri Wicaksono ◽  
Vania Mitha Pratiwi ◽  
Yeny Widya Rakhmawati
Keyword(s):  
Sodium Alginate ◽  
Brown Algae ◽  
Extraction Process ◽  
Composition Analysis ◽  
3D Printer ◽  
X Ray Diffraction ◽  
X Ray ◽  
3D Printed ◽  
Preliminary Study

Utilization of brown algae especially in Madura, where it’s close to Surabaya, only limited for food. This become a reference for developing and increasing the potential of this algae by extracting one of the ingredients, namely alginate. This paper deals with the characterization of sodium alginate extracted from sargassum sp. using modified-purified calcium routes. The extracted sodium alginate will be further used as composite hydrogel materials and compared with commercial sodium alginate. Hereafter, the synthesized composite is expected to be bio-ink for 3d printer. Chemical composition analysis were analyzed using X-Ray Fluorosense (XRF) followed by Fourier-transform infrared spectroscopy (FTIR) analysis to identify the functional group of composite and X-Ray Diffraction (XRD). Furthermore, viscosity bath is performed to compare the viscosity of extracted and commercial one. The result shows that modified-purified calcium routes in the extraction process of sodium alginate is desirable for improving their properties. Interestingly enough, with the goal of using it as bio-ink in 3d printed fabrication, the synthesized composite shows viscosity, 300 cSt, which meets the criteria for bio-ink in 3d printer.

Preliminary Preparation and Characterization Studies of Cellulose from Merbau (Intsia bijuga)

2012 ◽  
Vol 620 ◽  
pp. 314-319
Author(s):  
Nur Amira Mamat Razali ◽  
Fauziah Abdul Aziz ◽  
Saadah Abdul Rahman
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Alkaline Treatment ◽  
Raw Material ◽  
X Ray Diffraction ◽  
X Ray ◽  
Preliminary Preparation ◽  
Characterization Studies ◽  
Scanning Electron

Hardwood is wood from angiosperm trees. The characteristic of hardwood include flowers, endosperm within seeds and the production of fruits that contain the seeds. This paper aims to discuss the preparation and characterization of cellulose obtained from hardwood. The hardwood Merbau (Intsia bijuga) was chosen as raw material in this study. Alkaline treatment and delignification methods were used for the preparation of cellulose. Acid hydrolysis was employed to produce cellulose nanocrystal (CNC). The treated and untreated samples were characterized using x-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM). The final product, from both trated and untreated samples were then compared.

scholarly journals Low temperature synthesis and characterization of Mn3O4 nanoparticles

2007 ◽  
Vol 5 (1) ◽  
pp. 169-176 ◽  
Author(s):  
Abdülhadi Baykal ◽  
Yüksel Köseoğlu ◽  
Mehmet Şenel
Keyword(s):  
Particle Size ◽  
Infrared Spectroscopy ◽  
Low Temperature ◽  
Synthesis And Characterization ◽  
Low Temperature Synthesis ◽  
Temperature Synthesis ◽  
X Ray ◽  
Peak Broadening ◽  
Mn3o4 Nanoparticles

AbstractHeating hydrous manganese (II) hydroxide gel at 85 °C for 12 hours produces Mn3O4 nanoparticles. They were characterized by X-ray powder diffraction (XRD) and infrared spectroscopy (FTIR). The particle size estimated from the SEM and X-ray peak broadening is approximately 32 nm, showing them to be nanocrystalline. EPR measurements confirm a typical Mn2+signal with a highly resolved hyperfine structure.

The Experimental of Low Temperature Color Slip for Decorative on Earthenware Body

2016 ◽  
Vol 690 ◽  
pp. 282-285
Author(s):  
Soravich Mulinta
Keyword(s):  
Low Temperature ◽  
Physical Properties ◽  
Manganese Oxide ◽  
Ferric Oxide ◽  
Potassium Feldspar ◽  
Raw Material ◽  
Blue Color ◽  
X Ray ◽  
Yellow Color

The purpose of the study was to investigate the effects of dolomite body, frit and potassium feldspar on the properties of color slip for decorative method of color slip on earthen ware production. The characterization of raw material was analyzed by X-ray fluorescence (XRF). The experiment started with triaxial blend of dolomite body, frit and potassium feldspar in the defined ratio and then to painting of color slips on earthenware production. After that, firing specimens at 950 °C in oxidation atmosphere. Finally, the specimens were tested microstructure and physical properties. The results showed that the ratio of 50% dolomite body, 40% frit and 10% potassium feldspar were optimum properties for decorative on earthenware body. In color slip consisting of blue color added Cobalt oxide 1% ,Green colors added chromic oxide 10% , Gray color added manganese oxide 10% ,yellow color added stain 2225 10% and hazel color added ferric oxide 2 wt %.

AlCl3·XNaCl Complex Compound as Catalyst Synthesis Dichlorophenylphosphine

2013 ◽  
Vol 641-642 ◽  
pp. 128-131 ◽  
Author(s):  
Tian Bo Fan ◽  
Gui Qi An ◽  
Tao Tang ◽  
Yun Yi Lui ◽  
Xiao Han ◽  
...  
Keyword(s):  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Production Rate ◽  
Complex Compound ◽  
Industrial Production ◽  
Raw Materials ◽  
Reference Value ◽  
Raw Material ◽  
Catalyst Synthesis ◽  
Catalyst Amount

Dichlorophenylphosphine(DCPP) was prepared by the catalyst of AlCl3·XNaCl complex using C6H6, PCl3as raw materials. The influences of the catalyst amount, raw material ratio and the choice of extractant on the production rate were studied, as well as the recycling of the catalyst. Fourier transform infrared spectroscopy was employed to characterize the products. The results show that the products by experiments were dichlorophenylphosphine(DCPP). All above have some reference value for the industrial production.

Sign in / Sign up

Export Citation Format

Share Document