Synthesis and Enhanced Electromagnetic Wave Absorption Properties of Fe3O4@ZnO Mesoporous Spheres

2014 ◽  
Vol 1663 ◽  
Author(s):  
Danping Sun ◽  
Wei Jiang ◽  
Yanping Wang ◽  
Chen Sun ◽  
Quan Zou ◽  
...  
Keyword(s):  
Mesoporous Structure ◽  
Absorption Properties ◽  
Transmission Electron Microscopy Analysis ◽  
Absorption Frequency ◽  
Wave Absorption ◽  
Type Iv ◽  
Zno Nanocrystals ◽  
Transmission Electron ◽  
Electron Microscopy Analysis ◽  
Adsorption Desorption

ABSTRACTMesoporous Fe3O4 nanoparticles coated with ZnO nanocrystals were successfully synthesized by a simple solution method at low temperature. The transmission electron microscopy analysis indicates that the mesoporous Fe3O4 nanoparticles are monodispersed with a mean diameter of 160 nm and the thickness of ZnO layer is 15 nm approximately. The porosity of the products was further substantiated by the nitrogen (N2) sorption measurement. The N2 adsorption-desorption isotherm curve can be identified as type IV, which is a characteristic of mesopores. Electromagnetic (EM) wave absorption properties of the as-prepared Fe3O4@ZnO mesoporous spheres-wax composites were investigated at a room temperature in the frequency range of 0.5∼18 GHz. Interestingly, the Fe3O4@ZnO mesoporous spheres exhibit an enhanced EM wave absorption due to the mesoporous structure. The multiple absorbing mechanisms result from the interface polarization induced by the special core/shell and mesoporous structures as well as dipole polarization of both Fe3O4 and ZnO. The results demonstrate that the Fe3O4@ZnO mesoporous spheres are attractive candidates for a new kind of EM wave absorption materials with wide absorption frequency band.

Zinc Oxide Nanoparticles-Immobilized Mesoporous Hollow Silica Spheres for Photodegradation of Sodium Dodecylbenzenesulfonate

2016 ◽  
Vol 69 (7) ◽  
pp. 790 ◽  
Author(s):  
Parisa Pourdayhimi ◽  
Pei Wen Koh ◽  
Mohamed Mohd Salleh ◽  
Hadi Nur ◽  
Siew Ling Lee
Keyword(s):  
Mesoporous Structure ◽  
Molar Ratio ◽  
Silica Spheres ◽  
Transmission Electron Microscopy Analysis ◽  
Sodium Dodecylbenzenesulfonate ◽  
Hollow Silica ◽  
Hollow Silica Spheres ◽  
Transmission Electron ◽  
Electron Microscopy Analysis ◽  
Adsorption Desorption

ZnO-Immobilized mesoporous hollow silica spheres (ZnO/xMHSS; x = 15, 30, 50 molar ratio of Zn/Si) were synthesized and examined as photocatalysts toward the degradation of sodium dodecylbenzenesulfonate (SDBS). The hollow structures of MHSS and ZnO-immobilized MHSS composite were evidenced by transmission electron microscopy analysis. X-ray diffraction results confirmed the presence of ZnO and a mesoporous structure in the synthesized materials. N2 adsorption–desorption analysis also depicted the formation of a mesoporous structure and the increased surface area for the ZnO/xMHSS materials. Fourier transform infrared spectroscopy analysis revealed the formation of Si–O–Zn bonds due to interaction between ZnO and MHSS. The photocatalytic testing results indicated that all the ZnO/xMHSS materials showed improved efficiencies of 10–21 % toward the photodegradation of SDBS when compared with bare ZnO. Among the prepared materials, ZnO/15MHSS was the best photocatalyst, which photodegraded 68 % SDBS after 1 h reaction. The kinetic study demonstrated that the photocatalytic reaction followed the second-order model.

CHARACTERIZATION AND ELECTRICAL PROPERTIES OF ALIGNED CARBON NANOTUBES WITH HIGH ASPECT RATIO

2011 ◽  
Vol 10 (01n02) ◽  
pp. 23-28
Author(s):  
RAVI BHATIA ◽  
V. PRASAD ◽  
M. REGHU
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Aspect Ratio ◽  
Multiwall Carbon Nanotubes ◽  
High Quality ◽  
Transmission Electron Microscopy Analysis ◽  
Transmission Electron ◽  
Electron Microscopy Analysis ◽  
High Degree

High-quality multiwall carbon nanotubes (MWNTs) were produced by a simple one-step technique. The production of MWNTs was based on thermal decomposition of the mixture of a liquid phase organic compound and ferrocene. High degree of alignment was noticed by scanning electron microscopy. The aspect ratio of as-synthesized MWNTs was quite high (more than 4500). Transmission electron microscopy analysis showed the presence of the catalytic iron nanorods at various lengths of MWNTs. Raman spectroscopy was used to know the quality of MWNTs. The ratio of intensity of the G-peak to the D-peak was very high which revealed high quality of MWNTs. Magnetotransport studies were carried out at low temperature and a negative MR was noticed.

scholarly journals Thermodynamic Modelling and Microstructural Study of Z-Phase Formation in a Ta-Alloyed Martensitic Steel

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1332
Author(s):  
Florian Riedlsperger ◽  
Bernadette Gsellmann ◽  
Erwin Povoden-Karadeniz ◽  
Oriana Tassa ◽  
Susanna Matera ◽  
...  
Keyword(s):  
Special Focus ◽  
Scanning Calorimetry ◽  
Transmission Electron Microscopy Analysis ◽  
Computational Framework ◽  
Mobility Data ◽  
Interfacial Energies ◽  
Transmission Electron ◽  
Size Number ◽  
Electron Microscopy Analysis ◽  
Microscopy Analysis

A thermokinetic computational framework for precipitate transformation simulations in Ta-containing martensitic Z-steels was developed, including Calphad thermodynamics, diffusion mobility data from the literature, and a kinetic parameter setup that considered precipitation sites, interfacial energies and dislocation density evolution. The thermodynamics of Ta-containing subsystems were assessed by atomic solubility data and enthalpies from the literature as well as from the experimental dissolution temperature of Ta-based Z-phase CrTaN obtained from differential scanning calorimetry. Accompanied by a comprehensive transmission electron microscopy analysis of the microstructure, thermokinetic precipitation simulations with a wide-ranging and well-documented set of input parameters were carried out in MatCalc for one sample alloy. A special focus was placed on modelling the transformation of MX into the Z-phase, which was driven by Cr diffusion. The simulation results showed excellent agreement with experimental data in regard to size, number density and chemical composition of the precipitates, showing the usability of the developed thermokinetic simulation framework.

scholarly journals Morphological changes and bioaccumulation in response to cadmium exposure in Morchella spongiola, a fungus with potential for detoxification

2021 ◽  
Author(s):  
Hongyan Xu ◽  
Jing Guo ◽  
Qing Meng ◽  
Zhanling Xie
Keyword(s):  
Electron Microscopy ◽  
Morphological Changes ◽  
Intracellular Accumulation ◽  
Tolerance Mechanism ◽  
Edible Fungi ◽  
Transmission Electron Microscopy Analysis ◽  
Transmission Electron ◽  
Electron Microscopy Analysis ◽  
Microscopy Analysis ◽  
Micro Morphology

<i>Morchella</i> is a genus of edible fungi with strong resistance to Cd and the ability to accumulate it in the mycelium. However, the mechanisms conferring Cd resistance in <i>Morchella</i> are unknown. In the present study, morphological and physiological responses to Cd were evaluated in the mycelia of <i>Morchella spongiola</i>. Variations in hyphal micro-morphology including twisting, folding and kinking in mycelia exposed to different Cd concentrations (0.15, 0.9, 1.5, 2.4, 5.0 mg/L) were observed using scanning electron microscopy. Deposition of Cd precipitates on cell surfaces (at Cd concentrations > 2.4 mg/L) was shown by SEM-EDS. Transmission electron microscopy analysis of cells exposed to different concentrations of Cd revealed the loss of intracellular structures and the localization of Cd depositions inside/outside the cell. FTIR analysis showed that functional groups such as C=O, -OH, -NH and -CH could be responsible for Cd binding on the cell surface of <i>M. spongiola</i>. In addition, intracellular accumulation was observed in cultures at low Cd concentrations (< 0.9 mg/L), while extracellular adsorption occurred at higher concentrations. These results provide valuable information on the Cd tolerance mechanism in <i>M. spongiola</i> and constitute a robust foundation for further studies on fungal bioremediation strategies.

Sign in / Sign up

Export Citation Format

Share Document