Phase Separation of Carboxylated Poly-L-lysine

2014 ◽  
Vol 1622 ◽  
pp. 129-133
Author(s):  
Esha Das ◽  
Kazuaki Matsumura
Keyword(s):  
Phase Separation ◽  
Electric Fields ◽  
Sudden Change ◽  
Solution Temperature ◽  
Stimuli Responsive ◽  
Responsive Materials ◽  
Solvation State ◽  
External Stimuli

ABSTRACTStimuli-responsive materials are capable of reversibly altering their properties depending on the environmental conditions or external stimuli. External stimuli typically include thermal, pH, electric fields, optical, magnetic fields, mechanical forces and chemical interactions. There are many instances in nature where responsive surfaces have been observed. Temperature is the most widely used stimulus in environmentally responsive polymer systems. The change of temperature is not only relatively easy to control, but also easily applicable both in vitro and in vivo. Temperature responsive polymers exhibit a phase transition at a certain temperature, which causes a sudden change in the solvation state. Polymers that become insoluble upon heating have a so-called lower critical solution temperature (LCST). One example of these polymers is poly (N-isopropyl acrylamide), which shows LCST at about 32 °C, close to the physiological temperature. In this study, we report the developing of novel polyampholytes which shows thermo-, salt-responsive liquid-liquid phase separation in aqueous solution.

Smart Polymers and their Applications: A Review

2017 ◽  
Vol 8 (03) ◽  
Author(s):  
Gore S. A. ◽  
Gholve S. B. ◽  
Savalsure S. M. ◽  
Ghodake K. B. ◽  
Bhusnure O. G. ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Water Soluble ◽  
Solution Temperature ◽  
Smart Polymers ◽  
Stimuli Responsive ◽  
Responsive Materials ◽  
Water Soluble Polymers ◽  
Commercial Applications ◽  
Stimuli Sensitive ◽  
External Stimuli

Smart polymers are materials that respond to small external stimuli. These are also referred as stimuli responsive materials or intelligent materials. Smart polymers that can exhibit stimuli-sensitive properties are becoming important in many commercial applications. These polymers can change shape, strength and pore size based on external factors such as temperature, pH and stress. The stimuli include salt, UV irradiation, temperature, pH, magnetic or electric field, ionic factors etc. Smart polymers are very promising applicants in drug delivery, tissue engineering, cell culture, gene carriers, textile engineering, oil recovery, radioactive wastage and protein purification. The study is focused on the entire features of smart polymers and their most recent and relevant applications. Water soluble polymers with tunable lower critical solution temperature (LCST) are of increasing interest for biological applications such as cell patterning, smart drug release, DNA sequencing etc.

scholarly journals Chimeric Stimuli-Responsive Liposomes as Nanocarriers for the Delivery of the Anti-Glioma Agent TRAM-34

2021 ◽  
Vol 22 (12) ◽  
pp. 6271
Author(s):  
Nikolaos Naziris ◽  
Natassa Pippa ◽  
Evangelia Sereti ◽  
Varvara Chrysostomou ◽  
Marta Kędzierska ◽  
...  
Keyword(s):  
Stimuli Responsive ◽  
Glioblastoma Cells ◽  
Responsive Materials ◽  
Biological Assays ◽  
Current State ◽  
Therapeutic Molecules ◽  
Thermal Analysis Techniques ◽  
Antiglioma Activity

Nanocarriers are delivery platforms of drugs, peptides, nucleic acids and other therapeutic molecules that are indicated for severe human diseases. Gliomas are the most frequent type of brain tumor, with glioblastoma being the most common and malignant type. The current state of glioma treatment requires innovative approaches that will lead to efficient and safe therapies. Advanced nanosystems and stimuli-responsive materials are available and well-studied technologies that may contribute to this effort. The present study deals with the development of functional chimeric nanocarriers composed of a phospholipid and a diblock copolymer, for the incorporation, delivery and pH-responsive release of the antiglioma agent TRAM-34 inside glioblastoma cells. Nanocarrier analysis included light scattering, protein incubation and electron microscopy, and fluorescence anisotropy and thermal analysis techniques were also applied. Biological assays were carried out in order to evaluate the nanocarrier nanotoxicity in vitro and in vivo, as well as to evaluate antiglioma activity. The nanosystems were able to successfully manifest functional properties under pH conditions, and their biocompatibility and cellular internalization were also evident. The chimeric nanoplatforms presented herein have shown promise for biomedical applications so far and should be further studied in terms of their ability to deliver TRAM-34 and other therapeutic molecules to glioblastoma cells.

scholarly journals Recent Advances on Stimuli-Responsive Hydrogels Based on Tissue-Derived ECMs and Their Components: Towards Improving Functionality for Tissue Engineering and Controlled Drug Delivery

Polymers ◽  
2021 ◽  
Vol 13 (19) ◽  
pp. 3263
Author(s):  
Julian A. Serna ◽  
Laura Rueda-Gensini ◽  
Daniela N. Céspedes-Valenzuela ◽  
Javier Cifuentes ◽  
Juan C. Cruz ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Regenerative Medicine ◽  
Disease Modeling ◽  
Mechanical Stability ◽  
Biological Properties ◽  
Stimuli Responsive ◽  
Precise Control ◽  
External Stimuli

Due to their highly hydrophilic nature and compositional versatility, hydrogels have assumed a protagonic role in the development of physiologically relevant tissues for several biomedical applications, such as in vivo tissue replacement or regeneration and in vitro disease modeling. By forming interconnected polymeric networks, hydrogels can be loaded with therapeutic agents, small molecules, or cells to deliver them locally to specific tissues or act as scaffolds for hosting cellular development. Hydrogels derived from decellularized extracellular matrices (dECMs), in particular, have gained significant attention in the fields of tissue engineering and regenerative medicine due to their inherently high biomimetic capabilities and endowment of a wide variety of bioactive cues capable of directing cellular behavior. However, these hydrogels often exhibit poor mechanical stability, and their biological properties alone are not enough to direct the development of tissue constructs with functional phenotypes. This review highlights the different ways in which external stimuli (e.g., light, thermal, mechanical, electric, magnetic, and acoustic) have been employed to improve the performance of dECM-based hydrogels for tissue engineering and regenerative medicine applications. Specifically, we outline how these stimuli have been implemented to improve their mechanical stability, tune their microarchitectural characteristics, facilitate tissue morphogenesis and enable precise control of drug release profiles. The strategic coupling of the bioactive features of dECM-based hydrogels with these stimulation schemes grants considerable advances in the development of functional hydrogels for a wide variety of applications within these fields.

scholarly journals Anti-Biofouling Strategies for Long-Term Continuous Use of Implantable Biosensors

Chemosensors ◽  
2020 ◽  
Vol 8 (3) ◽  
pp. 66 ◽  
Author(s):  
Jian Xu ◽  
Hyowon Lee
Keyword(s):  
Failure Modes ◽  
Foreign Body Response ◽  
Polymer Materials ◽  
Future Research ◽  
Stimuli Responsive ◽  
Responsive Materials ◽  
Implantable Biosensors ◽  
The Impact

The growing trend for personalized medicine calls for more reliable implantable biosensors that are capable of continuously monitoring target analytes for extended periods (i.e., >30 d). While promising biosensors for various applications are constantly being developed in the laboratories across the world, many struggle to maintain reliable functionality in complex in vivo environments over time. In this review, we explore the impact of various biotic and abiotic failure modes on the reliability of implantable biosensors. We discuss various design considerations for the development of chronically reliable implantable biosensors with a specific focus on strategies to combat biofouling, which is a fundamental challenge for many implantable devices. Briefly, we introduce the process of the foreign body response and compare the in vitro and the in vivo performances of state-of-the-art implantable biosensors. We then discuss the latest development in material science to minimize and delay biofouling including the usage of various hydrophilic, biomimetic, drug-eluting, zwitterionic, and other smart polymer materials. We also explore a number of active anti-biofouling approaches including stimuli-responsive materials and mechanical actuation. Finally, we conclude this topical review with a discussion on future research opportunities towards more reliable implantable biosensors.

scholarly journals FORMULATION AND IN VITRO, IN VIVO EVALUATION OF PRONIOSOMAL GEL OF NEOMYCIN SULPHATE

2019 ◽  
pp. 156-163
Author(s):  
AMOL SHETE ◽  
PRIYANKA THORAT ◽  
RAJENDRA DOIJAD ◽  
SACHIN SAJANE
Keyword(s):  
Phase Separation ◽  
Skin Irritation ◽  
Entrapment Efficiency ◽  
Separation Method ◽  
Gelling Agent ◽  
In Vivo Evaluation ◽  
Skin Delivery ◽  
Span 60

Objective: The objectives of present investigation were to prepare and evaluate proniosomes of neomycin sulphate (NS) by coacervation phase separation method by using sorbitan monostearate (span 60) and lecithin as a surfactant to increase the penetration through the skin and study the effect of concentration of the same. Methods: Proniosomes of neomycin sulphate (NS) were prepared by coacervation phase separation method by using span 60 and lecithin. The effect of concentration of span 60 and lecithin was studied by factorial design. The prepared proniosomes were converted to gel by using carbopol as a gelling agent. The prepared formulations were evaluated for entrapment efficiency, in vitro drug diffusion, in vitro antibacterial activity and in vivo skin irritation test etc. Results: All Formulation showed the percentage entrapment efficiency in the range 38.31±0.05% to 77.96±0.06%, good homogeneity and gel was easily spreadable with minimal of shear. Optimized formulation showed enhanced rate of diffusion in vitro, increase in zone of inhibition against staphylococcus aureus, no skin irritation and showed good stability. Conclusion: The results of present study indicates that proniosomal gel formulated by using combination of span 60, Lecithin, cholesterol can be used to enhance skin delivery of NS because of excellent permeation of drug. Developed proniosomal gel formulation was promising carrier for NS

scholarly journals Solvent Exposure and Ionic Condensation Drive Fuzzy Dimerization of Disordered Heterochromatin Protein Sequence

Biomolecules ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 915
Author(s):  
Jazelli Mueterthies ◽  
Davit A. Potoyan
Keyword(s):  
Phase Separation ◽  
Low Complexity ◽  
Nuclear Bodies ◽  
Disordered Proteins ◽  
Solvent Exposure ◽  
Ion Release ◽  
Dimer Formation ◽  
Eukaryotic Organisms

Proteins with low complexity, disordered sequences are receiving increasing attention due to their central roles in the biogenesis and regulation of membraneless organelles. In eukaryotic organisms, a substantial fraction of disordered proteins reside in the nucleus, thereby facilitating the formation of nuclear bodies, nucleolus, and chromatin compartmentalization. The heterochromatin family of proteins (HP1) is an important player in driving the formation of gene silenced mesoscopic heterochromatin B compartments and pericentric regions. Recent experiments have shown that the HP1a sequence of Drosophila melanogaster can undergo liquid-liquid phase separation under both in vitro and in vivo conditions, induced by changes of the monovalent salt concentration. While the phase separation of HP1a is thought to be the mechanism underlying chromatin compartmentalization, the molecular level mechanistic picture of salt-driven phase separation of HP1a has remained poorly understood. The disordered hinge region of HP1a is seen as the driver of salt-induced condensation because of its charge enriched sequence and post-translational modifications. Here, we set out to decipher the mechanisms of salt-induced condensation of HP1a through a systematic study of salt-dependent conformations of single chains and fuzzy dimers of disordered HP1a hinge sequences. Using multiple independent all-atom simulations with and without enhanced sampling, we carry out detailed characterization of conformational ensembles of disordered HP1a chains under different ionic conditions using various polymeric and structural measures. We show that the mobile ion release, enhancement of local transient secondary structural elements, and side-chain exposure to solvent are robust trends that accompany fuzzy dimer formation. Furthermore, we find that salt-induced changes in the ensemble of conformations of HP1a disordered hinge sequence fine-tune the inter-chain vs. self-chain interactions in ways that favor fuzzy dimer formation under low salt conditions in the agreement with condensation trends seen in experiments.

scholarly journals Targeting NSD2-mediated SRC-3 liquid–liquid phase separation sensitizes bortezomib treatment in multiple myeloma

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Jing Liu ◽  
Ying Xie ◽  
Jing Guo ◽  
Xin Li ◽  
Jingjing Wang ◽  
...  
Keyword(s):  
Multiple Myeloma ◽  
Drug Resistance ◽  
Phase Separation ◽  
Liquid Phase ◽  
Liquid Phase Separation ◽  
Acquired Drug Resistance ◽  
Bortezomib Treatment ◽  
Liquid Liquid Phase Separation

AbstractDevelopment of chemoresistance is the main reason for failure of clinical management of multiple myeloma (MM), but the genetic and epigenetic aberrations that interact to confer such chemoresistance remains unknown. In the present study, we find that high steroid receptor coactivator-3 (SRC-3) expression is correlated with relapse/refractory and poor outcomes in MM patients treated with bortezomib (BTZ)-based regimens. Furthermore, in immortalized cell lines, high SRC-3 enhances resistance to proteasome inhibitor (PI)-induced apoptosis. Overexpressed histone methyltransferase NSD2 in patients bearing a t(4;14) translocation or in BTZ-resistant MM cells coordinates elevated SRC-3 by enhancing its liquid–liquid phase separation to supranormally modify histone H3 lysine 36 dimethylation (H3K36me2) modifications on promoters of anti-apoptotic genes. Targeting SRC-3 or interference of its interactions with NSD2 using a newly developed inhibitor, SI-2, sensitizes BTZ treatment and overcomes drug resistance both in vitro and in vivo. Taken together, our findings elucidate a previously unrecognized orchestration of SRC-3 and NSD2 in acquired drug resistance of MM and suggest that SI-2 may be efficacious for overcoming drug resistance in MM patients.

scholarly journals Polymer-Based Smart Drug Delivery Systems for Skin Application and Demonstration of Stimuli-Responsiveness

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1285
Author(s):  
Louise Van Gheluwe ◽  
Igor Chourpa ◽  
Coline Gaigne ◽  
Emilie Munnier
Keyword(s):  
Drug Delivery ◽  
Drug Delivery Systems ◽  
Ex Vivo ◽  
Delivery Systems ◽  
Stimuli Responsive ◽  
Stimuli Responsive Polymers ◽  
Smart Drug ◽  
Smart Drug Delivery

Progress in recent years in the field of stimuli-responsive polymers, whose properties change depending on the intensity of a signal, permitted an increase in smart drug delivery systems (SDDS). SDDS have attracted the attention of the scientific community because they can help meet two current challenges of the pharmaceutical industry: targeted drug delivery and personalized medicine. Controlled release of the active ingredient can be achieved through various stimuli, among which are temperature, pH, redox potential or even enzymes. SDDS, hitherto explored mainly in oncology, are now developed in the fields of dermatology and cosmetics. They are mostly hydrogels or nanosystems, and the most-used stimuli are pH and temperature. This review offers an overview of polymer-based SDDS developed to trigger the release of active ingredients intended to treat skin conditions or pathologies. The methods used to attest to stimuli-responsiveness in vitro, ex vivo and in vivo are discussed.

scholarly journals Nuclear condensates of the Polycomb protein chromobox 2 (CBX2) assemble through phase separation

2018 ◽  
Vol 294 (5) ◽  
pp. 1451-1463 ◽  
Author(s):  
Roubina Tatavosian ◽  
Samantha Kent ◽  
Kyle Brown ◽  
Tingting Yao ◽  
Huy Nguyen Duc ◽  
...  
Keyword(s):  
Phase Separation ◽  
Polycomb Group ◽  
Site Directed Mutagenesis ◽  
Developmental Defects ◽  
Heterochromatin Formation ◽  
Intrinsically Disordered ◽  
Polycomb Protein ◽  
Condensate Formation

Polycomb group (PcG) proteins repress master regulators of development and differentiation through organization of chromatin structure. Mutation and dysregulation of PcG genes cause developmental defects and cancer. PcG proteins form condensates in the cell nucleus, and these condensates are the physical sites of PcG-targeted gene silencing via formation of facultative heterochromatin. However, the physiochemical principles underlying the formation of PcG condensates remain unknown, and their determination could shed light on how these condensates compact chromatin. Using fluorescence live-cell imaging, we observed that the Polycomb repressive complex 1 (PRC1) protein chromobox 2 (CBX2), a member of the CBX protein family, undergoes phase separation to form condensates and that the CBX2 condensates exhibit liquid-like properties. Using site-directed mutagenesis, we demonstrated that the conserved residues of CBX2 within the intrinsically disordered region (IDR), which is the region for compaction of chromatin in vitro, promote the condensate formation both in vitro and in vivo. We showed that the CBX2 condensates concentrate DNA and nucleosomes. Using genetic engineering, we report that trimethylation of Lys-27 at histone H3 (H3K27me3), a marker of heterochromatin formation produced by PRC2, had minimal effects on the CBX2 condensate formation. We further demonstrated that the CBX2 condensate formation does not require CBX2–PRC1 subunits; however, the condensate formation of CBX2–PRC1 subunits depends on CBX2, suggesting a mechanism underlying the assembly of CBX2–PRC1 condensates. In summary, our results reveal that PcG condensates assemble through liquid–liquid phase separation (LLPS) and suggest that phase-separated condensates can organize PcG-bound chromatin.

scholarly journals mTORC1 controls phase-separation and the biophysical properties of the cytoplasm by tuning crowding

2017 ◽  
Author(s):  
M. Delarue ◽  
G.P. Brittingham ◽  
S. Pfeffer ◽  
I.V. Surovtsev ◽  
S. Ping-lay ◽  
...  
Keyword(s):  
Phase Separation ◽  
Fluorescent Protein ◽  
Effective Diffusion ◽  
Reaction Rates ◽  
Biophysical Properties ◽  
Cell Interior ◽  
Profound Impact ◽  
Mtorc1 Pathway

Summary (Abstract)Macromolecular crowding has a profound impact on reaction rates and the physical properties of the cell interior, but the mechanisms that regulate crowding are poorly understood. We developed Genetically Encoded Multimeric nanoparticles (GEMs) to dissect these mechanisms. GEMs are homomultimeric scaffolds fused to a fluorescent protein. GEMs self-assemble into bright, stable fluorescent particles of defined size and shape. By combining tracking of GEMs with genetic and pharmacological approaches, we discovered that the mTORC1 pathway can tune the effective diffusion coefficient of macromolecules ≥15 nm in diameter more than 2-fold without any discernable effect on the motion of molecules ≥5 nm. These mTORCI-dependent changes in crowding and rheology affect phase-separation both in vitro and in vivo. Together, these results establish a role for mTORCI in controlling both the biophysical properties of the cytoplasm and the phase-separation of biopolymers.

Sign in / Sign up

Export Citation Format

Share Document