Extraction and Characterization of Natural Dyes Applied to ZnO-based DSSC

2013 ◽  
Vol 1537 ◽  
Author(s):  
G. Perez Hernandez ◽  
J. Pantoja Enriquez ◽  
C. I. Ramos-Villegas ◽  
M. Gonzalez-Solano ◽  
G. Oskam ◽  
...  
Keyword(s):  
Solar Cells ◽  
Broad Band ◽  
Dye Sensitized Solar Cells ◽  
Visible Region ◽  
Natural Dyes ◽  
Walnut Shell ◽  
Ruthenium Polypyridyl ◽  
Mangrove Tree ◽  
Vis Spectroscopy ◽  
Stretching Vibration

ABSTRACTThe dye-sensitized solar cells (DSSC) are a technological and economical alternative to conventional p-n junction solar cells. The DSSC is composed of a transparent conducting electrode (SnO2:F) coated by a porous, nanocrystalline film of n-ZnO to which dye molecules are attached, an organic electrolyte containing a reduction-oxidation couple, and finally a counter-electrode (glass/SnO2:F) coated by a thin film of platinum. The most efficient dyes for DSSCs are based on Ruthenium polypyridyl complexes, related to the high absorption coefficient in the entire visible range and the efficient injection of electrons into the conduction band of ZnO. However, the ruthenium polypyridyl complex contains a heavy metal of relatively high cost, and synthetic routes are complicated with low yields. Moreover, natural dyes in addition to their availability, are cost-effective, non-toxic and biodegradable materials, and can be extracted by simple procedures. In this paper we report the extraction of natural dyes from the stems of mangrove (D1) and tinto (D2) trees as well as from walnut (D3) shell. First, it was necessary to dehydrate the materials, after which extraction was performed using ethanol, water and sodium hydroxide solution. The dyes were characterized using UV-visible and infrared spectroscopy. The analysis of the infrared spectra shows an intense and broad band related to OH bond stretching vibration at 3393, 3442 and 3390 cm-1 for the mangrove tree, tinto tree and walnut shell, respectively. At 1051, 1123 and 1050 cm-1, there was a very strong absorption due to the stretching vibration of CO group, for the mangrove tree, tinto tree and walnut shell, respectively. These results indicate that the functional group for bonding to the ZnO is -OH for these dyes. The results of the U-Vis spectroscopy show that the strongest absorption in the visible region is provided by dyes of the tinto and mangrove trees. The current - voltage curve of a preliminary ZnO-DSSC sensitized with the natural dye of the mangrove tree bark is presented.

scholarly journals TheCortinariusFungi Dyes as Sensitizers in Dye-Sensitized Solar Cells

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Maciej Zalas ◽  
Błażej Gierczyk ◽  
Hubert Bogacki ◽  
Grzegorz Schroeder
Keyword(s):  
Solar Cells ◽  
Fill Factor ◽  
Dye Sensitized Solar Cells ◽  
Photocurrent Density ◽  
Natural Dyes ◽  
Conversion Process ◽  
Dye Sensitized ◽  
Vis Spectroscopy ◽  
First Time ◽  
Sensitized Solar Cells

The dye-sensitized solar cells have been for the first time prepared usingCortinariusfungi extracts as a source of sensitizing dyes. The seven species ofCortinariusgroup, collected in the East Poland, have been used to obtain crude extracts of natural dyes used as sensitizing solutions to prepare DSSCs working electrodes. Extracts and sensitized electrodes have been well characterized by UV-Vis spectroscopy measurements. The device sensitized byCortinarius sanguineusextract has been found the most active in photon-to-current conversion process with efficiencyη=0.64%, fill factorFF=65.9%, photocurrent densityJSC=1.79 mA/cm2, and photovoltageVOC=541 mV.

Efficiency of Solar Cells Based on Natural Dyes with Plasmonic Nanoparticle-Based Photo Anode

2018 ◽  
Vol 18 (06) ◽  
pp. 1850042
Author(s):  
Kirti Sahu ◽  
Mahesh Dhonde ◽  
V. V. S. Murty
Keyword(s):  
Solar Cells ◽  
Visible Region ◽  
Solar Spectrum ◽  
Visible Spectrum ◽  
Natural Dyes ◽  
Maximum Efficiency ◽  
Electromagnetic Spectrum ◽  
Synthetic Dyes ◽  
Vis Spectroscopy ◽  
Wide Range

Cheap and efficient dye sensitized solar cells (DSSCs) can be prepared using natural dyes responding in the visible region of solar spectrum. Localized surface plasmon resonance (LSPR) plays a very important role for the improvement in the efficiency of DSSCs by using Plasmonic nanoparticles (PNPs) for exploiting the visible portion of the solar radiation by transferring the energy from dye to PNP. This energy transfers from dye to semiconductor TiO2 through PNP which increases the overall photo catalytic activity. In the present study, Al-doped TiO2 photoanodes were prepared via sol–gel route and used for DSSC application. Various natural and synthetic dyes are prepared and the optical transmittance and absorbance of the dyes are measured in the wavelength range of 250–850[Formula: see text]nm using UV-Vis spectroscopy and they are used in DSSC. Natural dyes extracted from fruits and synthetic dye based on Ruthenium (Ru) metal complex is used as sensitizers. Power conversion efficiency (PCE) of solar cells utilizing different dyes is compared. Out of the various natural dyes, beetroot and strawberry extracts based dyes show good absorbance in the visible range of electromagnetic spectrum. On the other hand, synthetic dyes based on Ru complex show strong absorbance over a wide range of visible spectrum. The absorbance increases with increase in concentration of Ru in ethanol. The extracts of beetroot, strawberry and mixed fruits show a peak in absorbance spectra at 501nm, 416nm and 332nm, respectively, indicating the absorption over a wide range of visible spectrum. Maximum efficiency of DSSCs utilizing PNPs sensitized with beetroot and strawberry dyes are found to be 1.5% and 1.3%, respectively.

scholarly journals Electronic, Structural, and Optical Structure of Mono-Doped and Co-Doped (210) TiO2 Brookite Surfaces for Application in Dye-Sensitized Solar Cells—A First Principles Study

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3918
Author(s):  
Ratshilumela S. Dima ◽  
Lutendo Phuthu ◽  
Nnditshedzeni E. Maluta ◽  
Joseph K. Kirui ◽  
Rapela R. Maphanga
Keyword(s):  
Solar Cells ◽  
Band Gap ◽  
Dye Sensitized Solar Cells ◽  
Visible Region ◽  
Electromagnetic Spectrum ◽  
Doped Tio2 ◽  
Dye Sensitized ◽  
Sensitized Solar Cells ◽  
Co Doped ◽  
Optical Structure

Titanium dioxide (TiO2) polymorphs have recently gained a lot of attention in dye-sensitized solar cells (DSSCs). The brookite polymorph, among other TiO2 polymorphs, is now becoming the focus of research in DSSC applications, despite the difficulties in obtaining it as a pure phase experimentally. The current theoretical study used different nonmetals (C, S and N) and (C-S, C-N and S-N) as dopants and co-dopants, respectively, to investigate the effects of mono-doping and co-doping on the electronic, structural, and optical structure properties of (210) TiO2 brookite surfaces, which is the most exposed surface of brookite. The results show that due to the narrowing of the band gap and the presence of impurity levels in the band gap, all mono-doped and co-doped TiO2 brookite (210) surfaces exhibit some redshift. In particular, the C-doped, and C-N co-doped TiO2 brookite (210) surfaces exhibit better absorption in the visible region of the electromagnetic spectrum in comparison to the pure, S-doped, N-doped, C-S co-doped and N-S co-doped TiO2 brookite (210) surfaces.

Application of new natural dyes extracted from Nasturtium flowers (Tropaeolum majus) as photosensitizer in dye-sensitized solar cells

Optik ◽  
2021 ◽  
pp. 167331
Author(s):  
Shalini Singh ◽  
Ishwar Chandra Maurya ◽  
Shubham Sharma ◽  
Shiva Prakash Singh Kushwaha ◽  
Pankaj Srivastava ◽  
...  
Keyword(s):  
Solar Cells ◽  
Dye Sensitized Solar Cells ◽  
Natural Dyes ◽  
Dye Sensitized ◽  
Tropaeolum Majus ◽  
Sensitized Solar Cells

Thiocyanate Free Ruthenium(II) Complexes for Dye Sensitized Solar Cells (DSSCs)

2018 ◽  
Vol 382 ◽  
pp. 369-373
Author(s):  
Usana Mahanitipong ◽  
Preeyapat Prompan ◽  
Rukkiat Jitchati
Keyword(s):  
Solar Cells ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Visible Region ◽  
Photocurrent Density ◽  
Open Circuit ◽  
Dye Sensitized ◽  
Ligand Charge Transfer ◽  
Sensitized Solar Cells ◽  
Open Circuit Photovoltage

The four thiocyanate free ruthenium(II) complexes; [Ru(N^N)2(C^N)]PF6were synthesized and characterized for dye sensitized solar cells (DSSCs). The results showed that the broad absorptions covered the visible region from metal to ligand charge transfer (MLCT) were obtained with the main peaks at 560, 490 and 400 nm. The materials were studied DSSC performance under standard AM 1.5. Compound PP1 showed the power conversion efficiency (PCE) at 3.10%, with a short-circuit photocurrent density (Jsc) of 7.99 mA cm-2, an open-circuit photovoltage (Voc) of 563 mV and a high fill factor (ff) of 0.690.

Influence of Electron Injection Rate in Triphenylamine Based Dye for Dye-Sensitized Solar Cells: A First Principle Study

2019 ◽  
Vol 233 (9) ◽  
pp. 1247-1259
Author(s):  
Madhu Prakasam
Keyword(s):  
Solar Cells ◽  
Absorption Spectra ◽  
Density Functional ◽  
Dye Sensitized Solar Cells ◽  
Visible Region ◽  
Electron Injection ◽  
Injection Rate ◽  
Visible Absorption ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

Abstract In this work, we systematically investigate the impacts of electron-donor based on Triphenylamine (TPA). The Geometry structure, energy levels, light-harvesting ability and ultraviolet-visible absorption spectra were calculated by using Density Functional Theory (DFT) and Time-Dependent-DFT. The electron injection rate of the TPA-N(CH3)2 based dyes has 0.71 eV for high among the dye sensitizer. The First and Second order Hyperpolarizability of the 11.95 × 10−30 e.s.u and 12195.54 a.u, respectively for TPA-N(CH3)2 based dye. The calculated absorption spectra were showed in the ultra-violet visible region for power conversion region. The study reveals that the electron transfer character of TPA-N(CH3)2 based dyes can be made suitable for applications in Dye-Sensitized Solar Cells.

scholarly journals Natural Dyes: From Cotton Fabrics to Solar Cells

2021 ◽  
Author(s):  
Indriana Kartini ◽  
Adhi Dwi Hatmanto
Keyword(s):  
Solar Cells ◽  
Dye Sensitized Solar Cells ◽  
Cotton Fabrics ◽  
Natural Dye ◽  
Natural Dyes ◽  
Oxide Surface ◽  
Solar Cell Efficiency ◽  
Cell Efficiency ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

This article will discuss natural dyes’ role, from colouring the cotton fabrics with some functionality to harvesting sunlight in the dye-sensitized solar cells. Natural dye colourants are identical to the low light- and wash-fastness. Therefore, an approach to improving the colourant’s physical properties is necessary. Colouring steps employing silica nanosol and chitosan will be presented. The first part will be these multifunctional natural dye coatings on cotton fabrics. Then, functionality such as hydrophobic surfaces natural dyed cotton fabrics will be discussed. Natural dyes are also potential for electronic application, such as solar cells. So, the second part will present natural dyes as the photosensitizers for solar cells. The dyes are adsorbed on a semiconductor oxide surface, such as TiO2 as the photoanode. Electrochemical study to explore natural dyes’ potential as sensitizer will be discussed, for example, natural dyes for Batik. Ideas in improving solar cell efficiency will be discussed by altering the photoanode’s morphology. The ideas to couple the natural dyes with an organic–inorganic hybrid of perovskite and carbon dots are then envisaged.

scholarly journals Structural and Optical Analysis of Ag Nanoparticles assisted Vertically Aligned TiO2 Nanowires based photoanode for Dye-sensitized Solar Cells Application

2021 ◽  
Author(s):  
Biraj Shougaijam ◽  
Salam Surjit Singh
Keyword(s):  
Solar Cells ◽  
Ag Nanoparticles ◽  
Dye Sensitized Solar Cells ◽  
Visible Region ◽  
Ag Nps ◽  
Dye Sensitized ◽  
Vertically Aligned ◽  
Glad Technique ◽  
Sensitized Solar Cells ◽  
Pet Substrate

Abstract In this work, vertically aligned TiO 2 -Nanowires (TiO 2 -NWs) and Ag Nanoparticles assisted TiO 2 Nanowires (TAT-NWs) were deposited on glass and flexible PET substrates using the Glancing Angle Deposition (GLAD) technique. The morphology and structural analysis of the samples manifest the successful deposition of vertically aligned TiO 2 -NWs and TAT-NWs. The HR-TEM image of TiO 2 -NWs shows the polycrystalline nature. Further, the XRD result confirms the polycrystalline nature of both the TiO 2 -NWs and TAT-NWs samples. Besides, the HR-TEM image confirms the presence of small crystal grains of Ag Nanoparticles (Ag-NPs) at the mid of the annealed TAT-NWs. It is evident from the Selective Area Electron Diffraction (SAED) analysis of the TiO 2 -NWs and annealed TAT-NWs that the crystallinity of TiO 2 present in the annealed TAT-NWs improves after annealing. The absorption spectrum analysis of TAT-NWs deposited on glass substrate shows enhance absorption peak in the visible region with a maximum peak at ~463 nm wavelength compare to the TiO 2 -NWs, which may be attributed to the Surface Plasmon Resonance (SPR) effect of Ag-NPs. Further, it is interesting to observe that the TAT-NWs deposited on PET substrate show further absorption enhancement in the UV and visible region. In addition, the Photoluminescence analysis reveals that the bandgap of the TiO 2 -NWs is ~3.12 eV, which supports the bandgap extracted from the Tauc plot. Therefore, the proposed method of fabricating TAT-NWs on glass and flexible ITO coated PET substrate using the GLAD technique may be applicable for developing novel photoanode for Dye-sensitized Solar Cells (DSSCs) and other optoelectronic applications.

Sign in / Sign up

Export Citation Format

Share Document