Efficiency of inhibitors for chloride-induced crevice corrosion of Alloy 22

2012 ◽  
Vol 1475 ◽  
Author(s):  
Mauricio Rincón Ortíz ◽  
Martín A. Rodríguez ◽  
Ricardo M. Carranza ◽  
Raul B. Rebak

ABSTRACTAlloy 22 is considered as a candidate for engineered barriers of nuclear repositories. Chloride is the only species present in groundwater that is able to promote crevice corrosion, if severe conditions such as high temperatures and a tight crevice are present. Other species present in groundwater have been shown to be inhibitors or non-detrimental species. The objective of this work was to evaluate the efficiency of different species potentially found in groundwaters as possible inhibitors of crevice corrosion of Alloy 22. The crevice corrosion repassivation potential of Alloy 22 was determined in chloride plus inhibitor solutions at 90ºC. The species tested as inhibitors were nitrate, sulfate, carbonate, bicarbonate, chromate, molybdate and tungstate. Nitrate was the most efficient among tested inhibitors. The carbonate was the only species of the carbonate / bicarbonate / carbonic acid equilibrium able to inhibit the chloride-induced crevice corrosion of Alloy 22. Sulfate, chromate and molybdate were moderately good inhibitors.

Author(s):  
Ahmet Yilmaz ◽  
Pasu Pasupathi ◽  
Rau´l B. Rebak

Artificially creviced Alloy 22 (N06022) is susceptible to crevice corrosion in presence of high chloride aqueous solution when high temperatures and high anodic potentials are applied. The presence of oxyanions in the electrolyte, especially nitrate, inhibits the nucleation and growth of crevice corrosion. Crevice corrosion may initiate when a constant potential above the crevice repassivation potential is applied. The occurrence of crevice corrosion can be divided into three characteristic domains: (1) nucleation, (2) growth and (3) stifling and arrest. That is, crevice corrosion reaches a critical stage after which growth stops and the specimens start to regain the passive behavior displayed before the nucleation of localized attack.


2004 ◽  
Vol 824 ◽  
Author(s):  
Z. Qin ◽  
D.W. Shoesmith

AbstractA probabilistic model to predict the lifetimes of the engineered barrier system proposed for the Yucca Mountain repository is described. The model assumes that the titanium Grade-7 drip shield will fail by hydrogen-induced cracking and the Alloy-22 waste package by a combination of passive and crevice corrosion. The model predicts that crevice corrosion of the waste package can be completely avoided ifthe drip shield deflects seepage drips for between 2000 (realistic behaviour) and 6000 years (conservative behaviour). Sensitivity calculations on the crevice corrosion model suggest that early waste package failure is extremely unlikely providing the drip shield performs its function for a minimum of ~ 300 years.


2010 ◽  
Vol 1265 ◽  
Author(s):  
Mauricio Rincon Ortiz ◽  
Martín A. Rodríguez ◽  
Ricardo M. Carranza ◽  
Raul B. Rebak

AbstractAlloy 22 belongs to the Ni-Cr-Mo family and it is highly resistant to general and localized corrosion. It may suffer crevice corrosion in aggressive environmental conditions. This alloy has been considered as a corrosion-resistant barrier for high-level nuclear waste containers. It is assumed that localized corrosion may occurs when the corrosion potential (ECORR) is equal or higher than the crevice corrosion repassivation potential (ER,CREV). The latter is measured by means of different electrochemical techniques using artificially creviced specimens. These techniques include cyclic potentiodynamic polarization (CPP) curves, Tsujikawa-Hisamatsu electrochemical (THE) method or other non-standard methods, such as the PD-GS-PD technique.The aim of the present work was to determine reliable critical or protection potentials for crevice corrosion of Alloy 22 in pure chloride solutions at 90°C. Conservative methodologies (which include extended potentiostatic steps) were applied for determining protection potentials below which crevice corrosion cannot initiate and propagate. Results from PD-GS-PD technique were compared with those from these methodologies in order to assess their reliability. Results from the CPP and the THE methods were also considered for comparison. The repassivation potential resulting from the PD-GS-PD technique was conservative and reproducible, and it did not depend on the amount of previous crevice corrosion propagation.


JOM ◽  
2005 ◽  
Vol 57 (1) ◽  
pp. 56-61 ◽  
Author(s):  
Kenneth J. Evans ◽  
Ahmet Yilmaz ◽  
S. Daniel Day ◽  
Lana L. Wong ◽  
John C. Estill ◽  
...  

2011 ◽  
Vol 46 (2) ◽  
pp. 129-133 ◽  
Author(s):  
C M Giordano ◽  
M Rincón Ortíz ◽  
M A Rodríguez ◽  
R M Carranza ◽  
R B Rebak

2006 ◽  
Vol 985 ◽  
Author(s):  
Kenneth J. Evans ◽  
Raul B. Rebak

AbstractIn general, the susceptibility of Alloy 22 to suffer crevice corrosion is measured using the Cyclic Potentiodynamic Polarization (CPP) technique. This is a fast technique that gives rather accurate and reproducible values of repassivation potential (ER1) in most cases. In the fringes of susceptibility, when the environment is not highly aggressive, the values of repassivation potential using the CPP technique may not be highly reproducible, especially because the technique is fast and because transpassive corrosion may influence or mask the nucleation and propagation of crevice corrosion. To circumvent this, the repassivation potential of Alloy 22 was measured using a slower method that combines Potentiodynamic-Galvanostatic-Potentiostatic steps (called here the Tsujikawa-Hisamatsu Electrochemical or THE method). The THE method applies the charge to the specimen in a more controlled way, which may give more reproducible repassivation potential values, especially when the environment is not aggressive. The values of repassivation potential of Alloy 22 in sodium chloride plus potassium nitrate solutions were measured using the THE and CPP methods. Results show that both methods yield similar values of repassivation potential, especially under aggressive conditions.


CORROSION ◽  
2009 ◽  
Vol 65 (7) ◽  
pp. 449-460 ◽  
Author(s):  
X. He ◽  
B. Brettmann ◽  
H. Jung

2008 ◽  
Vol 1107 ◽  
Author(s):  
Raul B. Rebak ◽  
Gabriel O. Ilevbare ◽  
Ricardo M. Carranza

AbstractA comprehensive matrix of 60 tests was designed to explore the effect of calcium chloride vs. sodium chloride and the ratio R of nitrate concentration over chloride concentration on the repassivation potential of Alloy 22. Tests were conducted using the cyclic potentiodynamic polarization (CPP) technique at 75°C and at 90°C. Results show that at a ratio R of 0.18 and higher nitrate was able to inhibit the crevice corrosion in Alloy 22 induced by chloride. Current results fail to show in a consistent way a different effect on the repassivation potential of Alloy 22 for calcium chloride solutions than for sodium chloride solutions


CORROSION ◽  
2008 ◽  
Vol 64 (7) ◽  
pp. 613-623 ◽  
Author(s):  
T. Lian ◽  
G. E. Gdowski ◽  
P. D. Hailey ◽  
R. B. Rebak

Sign in / Sign up

Export Citation Format

Share Document