Derivation of an approximate analytical solution for understanding the response characteristics of the EBS

2012 ◽  
Vol 1475 ◽  
Author(s):  
T. Ohi ◽  
T. Chiba ◽  
T. Nakagawa ◽  
T. Takase ◽  
T. Nakazawa ◽  
...  

ABSTRACTTo perform a safety assessment for the geological disposal of radioactive waste, it is important to understand the response characteristics of the disposal system. In this study, approximate analytical solutions for steady-state nuclide releases from the engineered barrier system (EBS) of a repository were derived for an orthogonal one-dimensional diffusion model. In these approximate analytical solutions, inventory depletion, decay during migration and the influence of groundwater flow in the excavation damaged zone (EDZ) were considered. These solutions were simplified by the Taylor theorem in order to clearly represent the response characteristics of the EBS. The validity of these solutions was shown by comparison with numerical solutions. The response characteristics of the EBS are useful for identifying target values for important parameters that would have the effect of improving the robustness of system safety. The robustness of the geological disposal system and the reliability of the safety assessment can thus potentially be improved using the approximate analytical solutions.

The microwave heating of a one-dimensional, semi-infinite material with low conductivity is considered. Starting from Maxwell’s equations, it is shown that this heating is governed by a coupled system consisting of the damped wave equation and a forced heat equation with forcing depending on the amplitude squared of the electric field. For simplicity, the conductivity of the material and the speed of microwave radiation in the material are assumed to have power law dependencies on temperature. Approximate analytical solutions of the governing equations are found as a slowly varying wave. These solutions and the slow equations from which they are derived are found to give criteria for when ‘hotspots' (regions of very high temperature relative to their surroundings) can form. The approximate analytical solutions are compared with numerical solutions of the governing equations.


2019 ◽  
Vol 24 (1) ◽  
pp. 199-211
Author(s):  
M. Yürüsoy ◽  
Ö.F. Güler

Abstract The steady-state magnetohydrodynamics (MHD) flow of a third-grade fluid with a variable viscosity parameter between concentric cylinders (annular pipe) with heat transfer is examined. The temperature of annular pipes is assumed to be higher than the temperature of the fluid. Three types of viscosity models were used, i.e., the constant viscosity model, space dependent viscosity model and the Reynolds viscosity model which is dependent on temperature in an exponential manner. Approximate analytical solutions are presented by using the perturbation technique. The variation of velocity and temperature profile in the fluid is analytically calculated. In addition, equations of motion are solved numerically. The numerical solutions obtained are compared with analytical solutions. Thus, the validity intervals of the analytical solutions are determined.


1962 ◽  
Vol 2 (03) ◽  
pp. 225-256 ◽  
Author(s):  
G. Rowan ◽  
M.W. Clegg

Abstract The basic equations for the flow of gases, compressible liquids and incompressible liquids are derived and the full implications of linearising then discussed. Approximate solutions of these equations are obtained by introducing the concept of a disturbed zone around the well, which expands outwards into the reservoir as fluid is produced. Many important and well-established results are deduced in terms of simple functions rather than the infinite series, or numerical solutions normally associated with these problems. The wide range of application of this approach to transient radial flow problems is illustrated with many examples including; gravity drainage of depletion-type reservoirs; multiple well systems; well interference. Introduction A large number of problems concerning the flow of fluids in oil reservoirs have been solved by both analytical and numerical methods but in almost all cases these solutions have some disadvantages - the analytical ones usually involve rather complex functions (infinite series or infinite integrals) which are difficult to handle, and the numerical ones tend to mask the physical principles underlying the problem. It would seem appropriate, therefore, to try to find approximate analytical solutions to these problems without introducing any further appreciable errors, so that the physical nature of the problem is retained and solutions of comparable accuracy are obtained. One class of problems will be considered in this paper, namely, transient radial flow problems, and it will be shown that approximate analytical solutions of the equations governing radial flow can be obtained, and that these solutions yield comparable results to those calculated numerically and those obtained from "exact" solutions. It will also be shown that the restrictions imposed upon the dependent variable (pressure) are just those which have to be assumed in deriving the usual diffusion-type equations. The method was originally suggested by Guseinov, whopostulated a disturbed zone in the reservoir, the radius of which increases with time, andreplaced the time derivatives in the basic differential equation by its mean value in the disturbed zone. In this paper it is proposed to review the basic theory leading to the equations governing the flow of homogeneous fluids in porous media and to consider the full implications of the approximation introduced in linearising them. The Guseinov-type approximation will then be applied to these equations and the solutions for the flow of compressible and incompressible fluids, and gases in bounded and infinite reservoirs obtained. As an example of the application of this type of approximation, solutions to such problems as production from stratified reservoirs, radial permeability discontinuities; multiple-well systems, and well interference will be given. These solutions agree with many other published results, and in some cases they may be extended to more complex problems without the computational difficulties experienced by other authors. THEORY In order to review the basic theory from a fairly general standpoint it is proposed to limit the idealising assumptions to the minimum necessary for analytical convenience. The assumptions to be made are the following:That the flow is irrotational.That the formation is of constant thickness.Darcy's Law is valid.The formation is saturated with a single homogeneous fluid. SPEJ P. 225^


2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Ke Man ◽  
Xiaoli Liu ◽  
Ju Wang ◽  
Xiyong Wang

Based on the slit charge technology, the blasting progress and the blasting theory have been studied in detail. Combined with the high-level radioactive waste geological disposal, in which the excavation damaged zone of the surrounding rock is required as small as possible, the testing of the Beishan exploration tunnel (BET) has been studied, and the blasting parameters have been designed using the slit charge technology. Theoretically, the rock failure criterion has been proposed, which adopted the dynamic mechanical parameters, such as the dynamic compress strength, dynamic tensile strength, dynamic modulus, dynamic passion ratio, dynamic fracture toughness, and dynamic stress intensity factor. Furthermore, the blasting test has been carried out under the same tunnel face with left and right sides simultaneously, and it can be found that the blasting effect with the slit charge technology is better than another side, which verified the useful and scientific meaning of this technology. It should be noticed that the blasting method includes numerous blasting parameters, which interact with each other. Those blasting parameters obtained just limited the slit charge, and the result and the theoretical knowledge could be applied to the blasting and excavation of the deep geoengineering and HLW geodisposal.


1989 ◽  
Vol 42 (1) ◽  
pp. 144-150
Author(s):  
J. O. Flower

de Wit has produced an analysis of the apparent spontaneous yaw of a ship when undergoing combined rolling and pitching. This analysis produces a set of four first-order simultaneous differential equations which govern the motion. In de Wit the numerical solutions of these equations for a couple of representative examples are given, as well as the corresponding analytical solutions to the linearized equations. In this communication it is shown how two of the four equations can be solved analytically; these solutions can be used to obtain approximate analytical solutions to the remaining two equations.


2013 ◽  
Vol 444-445 ◽  
pp. 786-790
Author(s):  
Cheng Li Zhang ◽  
Yun Zeng

Lorenz system families contain Lorenz system, Chen system and Lu system, their accurate analytical solutions are not yet obtained now. The segmenting recursion method was put forward in this paper, the equations of Lorenz system families were reasonably linearized within small segment, the recursion formulas were obtained by solving the approximate analytical solutions within small segment, and all numerical solutions were got by the recursion formulas. The chaotic motion of Lorenz system families were numerically simulated by means of the segmenting recursion method, the simulation results were compared with Runge-Kutta method. The comparative results show that the segmenting recursion method is very effective to numerically simulate Lorenz system families, not only method is simple, programming is easy, but result is accurate. this method is a universal new method to numerically simulate similar system.


2021 ◽  
Vol 249 ◽  
pp. 03039
Author(s):  
James Jenkins ◽  
Diego Berzi

We first phrase a boundary-value problem for a dense, steady, fully-developed, gravitational flow of identical inelastic spheres over in inclined bumpy base in the absence of sidewalls. We then obtain approximate analytical solutions for the profiles of the solid volume fraction, the strength of the velocity fluctuations, and the mean velocity of the flow. We compare these with those obtained in numerical solutions of the exact equations.


Sign in / Sign up

Export Citation Format

Share Document