Energy-efficient synthesis of ferrite powders and films

2012 ◽  
Vol 1386 ◽  
Author(s):  
Ranajit Sai ◽  
Suresh D. Kulkarni ◽  
K. J. Vinoy ◽  
Navakanta Bhat ◽  
S. A. Shivashankar
Keyword(s):  
Energy Efficient ◽  
Water Soluble ◽  
Synthesis Methods ◽  
Efficient Synthesis ◽  
Microwave Assisted ◽  
Soft Chemical Synthesis ◽  
Reduce Energy Consumption ◽  
Post Synthesis ◽  
By Products ◽  
Significant Effort

ABSTRACTIn recent years, there has been significant effort in the synthesis of nanocrystalline spinel ferrites due to their unique properties. Among them, zinc ferrite has been widely investigated for countless applications. As traditional ferrite synthesis methods are energy- and time-intensive, there is need for a resource-effective process that can prepare ferrites quickly and efficiently without compromising material quality. We report on a novel microwave-assisted soft-chemical synthesis technique in the liquid medium for synthesis of ZnFe2O4 powder below 100 °C, within 5 min. The use of β-diketonate precursors, featuring direct metal-to-oxygen bonds in their molecular structure, not only reduces process temperature and duration sharply, but also leads to water-soluble and non-toxic by-products. As synthesized powder is annealed at 300 °C for 2 hrs in a conventional anneal (CA) schedule. An alternative procedure, a 2-min rapid anneal at 300 °C (RA) is shown to be sufficient to crystallize the ferrite particles, which show a saturation magnetization (MS) of 38 emu/g, compared with 39 emu/g for a 2-hr CA. This signifies that our process is efficient enough to reduce energy consumption by ∼85% just by altering the anneal scheme. Recognizing the criticality of anneal process to the energy budget, a more energy-efficient variation of the reaction process was developed, which obviates the need for post-synthesis annealing altogether. It is shown that the process also can be employed to deposit crystalline thin films of ferrites.

scholarly journals Microwave Assisted Efficient Synthesis of Flavone using ZnO Nanoparticles as Promoter under Solvent-Free Conditions

2019 ◽  
Vol 31 (5) ◽  
pp. 1133-1136
Author(s):  
Pradip J. Unde ◽  
Nitin M. Thorat ◽  
Limbraj R. Patil
Keyword(s):  
Zno Nanoparticles ◽  
Solvent Free ◽  
Alternative Route ◽  
Efficient Synthesis ◽  
Short Reaction Time ◽  
Microwave Assisted ◽  
Solvent Free Conditions ◽  
The Stability ◽  
Work Up ◽  
By Products

A simple and highly efficient protocol for synthesis of flavones from 1-(2-hydroxyphenyl)-3-aryl-1,3-propanediones in presence of ZnO nanoparticles as a promoter in thermal as well as microwave irradiation under solvent-free conditions have been demonstrated. The catalyst is inexpensive, stable, can be easily recycled/reused for several cycles with consistent activity and observed almost same yield confirming the stability of the catalyst. It is believed that the present approach will become an alternative route for the conventional reactions. Because in this protocol, yield is quite high, short reaction time, simple work up, catalyst can be recycled as well as it is free of any hazardous by-products formation during workup.

scholarly journals An Efficient Synthesis of Milnacipran Hydrochloride via Reductive Amination of Aldehyde

2017 ◽  
Vol 2017 ◽  
pp. 1-6
Author(s):  
Neha Reddy Desireddy ◽  
Arava Glory ◽  
Krishna Reddy Bhimireddy ◽  
Yadagiri Kurra ◽  
Ram Reddy
Keyword(s):  
Primary Amine ◽  
Reductive Amination ◽  
Major Product ◽  
Important Application ◽  
Water Soluble ◽  
High Yield ◽  
Efficient Synthesis ◽  
By Products

An efficient synthesis of milnacipran hydrochloride has been accomplished. The important application of this paper is the reductive amination of aldehyde to primary amine with water soluble reagents. This method provides a high yield of primary amine as the major product, reduces the number of steps, and discourages by-products.

Regioselective Synthesis of Potent 4,5,6,7-Tetrahydroindazole Derivatives via Microwave-assisted Vilsmeier-Haack Reaction and their Antioxidant Activity Evaluation

2019 ◽  
Vol 16 (3) ◽  
pp. 194-201 ◽  
Author(s):  
Renu Bala ◽  
Vandana Devi ◽  
Pratibha Singh ◽  
Navjot Kaur ◽  
Pawandeep Kaur ◽  
...  
Keyword(s):  
Antioxidant Activity ◽  
Microwave Irradiation ◽  
Biological Activities ◽  
Reaction Times ◽  
Conventional Heating ◽  
High Chemical ◽  
Microwave Assisted ◽  
Work Up ◽  
Active Methylene ◽  
By Products

Background: Tetrahydroindazole, a member of the fused-pyrazole system, is a least studied class of heterocyclic compounds owing to its scarcity in nature. However, a large number of synthetically prepared tetrahydroindazoles are known to show a variety of biological activities such as interleukin- 2 inducible T-Cell kinase inhibitors, AMPA receptor positive allosteric modulators, antitumor, antituberculosis, anti-inflammatory and antimicrobial activities. Vilsmeier-Haack reaction is one of the most important chemical reactions used for formylation of electron rich arenes. Even though Vilsmeier- Haack reaction was studied on a wide variety of hydrazones derived from active methylene compounds, literature lacks the examples of the use of 4-substituted cyclohexanones as a substrate for the synthesis of 4,5,6,7-tetrahydroindazoles. The study of the reaction of Vilsmeier-Haack reagent with hydrazones derived from cyclic keto compounds having active methylene has been considered the interested topic of investigation. In the present study, ethyl cyclohexanone-4-carboxylate was treated with one equivalent of various hydrazines for two hours and the resulted hydrazones were further treated with an OPC-VH reagent (Vilsmeier-Haack reagent isolated from phthaloyl dichloride and N,Ndimethylformamide) afforded 4,5,6,7-tetrahydroindazoles in excellent yields. The synthesized compounds 4a-f and 5a-f were screened for their antioxidant activities using the DPPH radical scavenging assay. The target compounds were synthesized regioselectively using 4+1 approach in excellent yields. A number of experiments using both conventional heating as well as microwave irradiation methods were tried and on comparison, microwave irradiation method was found excellent in terms of easy work up, high chemical yields, shortened reaction times, clean and, no by-products formation. Some of the synthesized compounds showed significant antioxidant activity. The microwave assisted synthesis of 4,5,6,7-tetrahydroindazoles from ethyl cyclohexanone-4-carboxylate has been reported under mild conditions in excellent yield. Easy work up, high chemical yield, shortened reaction times, clean and no by-products formation are the major advantages of this protocol. These advantages may make this method useful for chemists who are interested in developing novel 4,5,6,7-tetrahydroindazole based drugs.

Performance Analysis of Energy Efficient Opportunistic Routing Protocols in Wireless Sensor Network

2019 ◽  
Vol 09 ◽  
Author(s):  
Premkumar Chithaluru ◽  
Rajeev Tiwari ◽  
Kamal Kumar
Keyword(s):  
Energy Consumption ◽  
Routing Protocols ◽  
Energy Efficient ◽  
Data Communication ◽  
Opportunistic Routing ◽  
Link Quality ◽  
Delivery Ratio ◽  
Performance Parameters ◽  
Wireless Medium ◽  
Reduce Energy Consumption

Background: Energy Efficient wireless routing has been an area of research particularly to mitigate challenges surrounding performance in category of Wireless Networks. Objectives: The Opportunistic Routing (OR) technique was explored in recent times and exhibits benefits over many existing protocols and can significantly reduce energy consumption during data communication with very limited compromise on performance. Methods : Using broadcasting nature of the wireless medium, OR practices to discourse two foremost issues of variable link quality and unpredictable node agility in constrained WSNs. OR has a potential to reduce delay in order to increase the consistency of data delivery in network. Results : Various OR based routing protocols have shown varying performances. In this paper, a detailed conceptual and experimental analysis is carried out on different protocols that uses OR technique for providing more clear and definitive view on performance parameters like Message Success Rate, Packet Delivery Ratio and Energy Consumption.

scholarly journals One-Pot Microwave-Assisted Synthesis of Water-Soluble Pyran-2,4,5-triol Glucose Amine Schiff Base Derivative: XRD/HSA Interactions, Crystal Structure, Spectral, Thermal and a DFT/TD-DFT

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 117
Author(s):  
Yousef Hijji ◽  
Rajeesha Rajan ◽  
Hamdi Ben Yahia ◽  
Said Mansour ◽  
Abdelkader Zarrouk ◽  
...  
Keyword(s):  
Schiff Base ◽  
Molecular Orbital ◽  
Density Functional ◽  
Condensation Reaction ◽  
3D Structure ◽  
Water Soluble ◽  
Microwave Assisted Synthesis ◽  
One Pot ◽  
Microwave Assisted ◽  
Td Dft

The(3R,4R,6R)-3-(((E)-2-hydroxybenzylidene)amino)-6-(hydroxymethyl)tetrahydro-2H-pyran-2,4,5-triol water-soluble Glucose amine Schiff base (GASB-1) product was made available by condensation of 2-hydroxybenzaldehyde with (3R,6R)-3-amino-6-(hydroxymethyl)-tetra-hydro-2H-pyran-2,4,5-triol under mono-mode microwave heating. A one-pot 5-minute microwave-assisted reaction was required to complete the condensation reaction with 90% yield and without having byproducts. The 3D structure of GASB-1 was solved from single crystal X-ray diffraction data and computed by DFT/6-311G(d,p). The Hirshfeld surface analysis (HSA), molecular electronic potential (MEP), Mulliken atomic charge (MAC), and natural population analysis (NPA) were performed. The IR and UV-Vis spectra were matched to their density functional theory (DFT) relatives and the thermal behavior was resolved in an open-room condition via thermogravimetry/Derivative thermogravimetry (TG/DTG) and differential scanning calorimetry (DSC). The highest occupied molecular orbital/lowest unoccupied molecular orbital (HOMO/LUMO), density of state (DOS), and time-dependence TD-DFT computations were correlated to the experimental electron transfer in water and acrylonitrile solvents.

scholarly journals Analytical Characterization of Water-Soluble Constituents in Olive-Derived By-Products

Foods ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 1299
Author(s):  
Pablo Doménech ◽  
Aleta Duque ◽  
Isabel Higueras ◽  
José Luis Fernández ◽  
Paloma Manzanares
Keyword(s):  
Olive Tree ◽  
Mediterranean Area ◽  
Water Soluble ◽  
Olive Pomace ◽  
Olive Leaves ◽  
Olive Stone ◽  
Olive Trees ◽  
Tree Pruning ◽  
By Products

Olive trees constitute one of the largest agroindustries in the Mediterranean area, and their cultivation generates a diverse pool of biomass by-products such as olive tree pruning (OTP), olive leaves (OL), olive stone (OS), and extracted olive pomace (EOP). These lignocellulosic materials have varying compositions and potential utilization strategies within a biorefinery context. The aim of this work was to carry out an integral analysis of the aqueous extractives fraction of these biomasses. Several analytical methods were applied in order to fully characterize this fraction to varying extents: a mass closure of >80% was reached for EOP, >76% for OTP, >65% for OS, and >52% for OL. Among the compounds detected, xylooligosaccharides, mannitol, 3,4-dihydroxyphenylglycol, and hydroxytyrosol were noted as potential enhancers of the valorization of said by-products. The extraction of these compounds is expected to be more favorable for OTP, OL, and EOP, given their high extractives content, and is compatible with other utilization strategies such as the bioconversion of the lignocellulosic fraction into biofuels and bioproducts.

scholarly journals Microwave-assisted Efficient Synthesis of Alliodorin and (±)-Curcuhydroquinone

1999 ◽  
Vol 23 (2) ◽  
pp. 164-165
Author(s):  
Goverdhan L. Kad ◽  
Anupam Khurana ◽  
Vasundhara Singh ◽  
Jasvinder Singh
Keyword(s):  
Grignard Reagents ◽  
Methyl Groups ◽  
Efficient Synthesis ◽  
Alkyl Aryl ◽  
Microwave Assisted ◽  
Aryl Bromides ◽  
Key Steps

Terpenoids 1 and 2 have been synthesized from readily available starting materials using Li2CuCI4-catalysed coupling of Grignard reagents with alkyl/aryl bromides and microwave-assisted oxidation of allylic methyl groups, using SeO2/ButOOH adsorbed over SiO2 as key steps.

scholarly journals Renovation of Public Lighting Systems in Cultural Landscapes: Lighting and Energy Performance and Their Impact on Nightscapes

Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 509
Author(s):  
Lodovica Valetti ◽  
Francesca Floris ◽  
Anna Pellegrino
Keyword(s):  
Energy Efficient ◽  
Flux Distribution ◽  
Cultural Landscapes ◽  
Energy Performance ◽  
Luminous Flux ◽  
Landscape Value ◽  
Reduce Energy Consumption ◽  
Lighting Systems ◽  
The Impact ◽  
Positive Effect

The technological innovation in the field of lighting and the need to reduce energy consumption connected to public lighting are leading many municipalities to undertake the renewal of public lighting systems, by replacing the existing luminaires with LED technologies. This renovation process is usually aimed at increasing energy efficiency and reducing maintenance costs, whist improving the lighting performance. To achieve these results, the new luminaires are often characterised by a luminous flux distribution much more downward oriented, which may remarkably influence and alter the perception of the night image of the sites. In this study the implications of the renovation of public lighting systems in terms of lighting and energy performance as well as the effects relating to the alteration of the night image, in historical contexts characterized by significant landscape value, are analysed. Results, along with demonstrating the positive effect that more sustainable and energy efficient lighting systems may have on the lighting performance and energy consumptions of public lighting systems, evidences the impact they may have on the alteration of the nocturnal image.

scholarly journals Microwave-Assisted vs. Conventional Hydrothermal Synthesis of MoS2 Nanosheets: Application towards Hydrogen Evolution Reaction

Crystals ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 1040 ◽  
Author(s):  
Getachew Solomon ◽  
Raffaello Mazzaro ◽  
Vittorio Morandi ◽  
Isabella Concina ◽  
Alberto Vomiero
Keyword(s):  
Hydrothermal Synthesis ◽  
Hydrothermal Method ◽  
Hydrogen Evolution ◽  
Hydrogen Evolution Reaction ◽  
Current Density ◽  
Crystal Morphology ◽  
Synthesis Method ◽  
Synthesis Methods ◽  
Mos2 Nanosheets ◽  
Microwave Assisted

Molybdenum sulfide (MoS2) has emerged as a promising catalyst for hydrogen evolution applications. The synthesis method mainly employed is a conventional hydrothermal method. This method requires a longer time compared to other methods such as microwave synthesis methods. There is a lack of comparison of the two synthesis methods in terms of crystal morphology and its electrochemical activities. In this work, MoS2 nanosheets are synthesized using both hydrothermal (HT-MoS2) and advanced microwave methods (MW-MoS2), their crystal morphology, and catalytical efficiency towards hydrogen evolution reaction (HER) were compared. MoS2 nanosheet is obtained using microwave-assisted synthesis in a very short time (30 min) compared to the 24 h hydrothermal synthesis method. Both methods produce thin and aggregated nanosheets. However, the nanosheets synthesized by the microwave method have a less crumpled structure and smoother edges compared to the hydrothermal method. The as-prepared nanosheets are tested and used as a catalyst for hydrogen evolution results in nearly similar electrocatalytic performance. Experimental results showed that: HT-MoS2 displays a current density of 10 mA/cm2 at overpotential (−280 mV) compared to MW-MoS2 which requires −320 mV to produce a similar current density, suggesting that the HT-MoS2 more active towards hydrogen evolutions reaction.

Sign in / Sign up

Export Citation Format

Share Document