Hydrothermally Grown Nanostructured Tungsten Trioxide (hydrate) Films and their Photocatalytic Properties

2012 ◽  
Vol 1406 ◽  
Author(s):  
Z. H. Jiao ◽  
X.W. Sun
Keyword(s):  
Tin Oxide ◽  
Tungsten Trioxide ◽  
Photoconversion Efficiency ◽  
Capping Agent ◽  
Orthorhombic Structure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Photocatalytic Activities ◽  
Xrd Studies ◽  
Crystal Seed

ABSTRACTWe report the growth of sheet-like nanostructured tungsten trioxide hydrate (3WO3·H2O) film on fluorine doped tin oxide (FTO) substrate via a facile crystal-seed-assisted hydrothermal method by using CH3COONH4 as capping agent. Dense thin film composed of irregular blocks with smaller surface area was obtained without the addition of CH3COONH4. X-ray diffraction (XRD) studies indicated that both films were of orthorhombic structure. The nanosheet film grown with CH3COONH4 after dehydration showed highly improved photocatalytic activities than the nanoblock one. The maximum anodic photocurrents of 1.16 mA/cm2 for oxidization of methanol and 0.5 mA/cm2 for water splitting were obtained for the nanosheet film with a highest photoconversion efficiency of about 0.3% under simulated solar illumination.

Effect of Ar Pressure on Properties of Polycrystalline CdZnTe Films

2013 ◽  
Vol 544 ◽  
pp. 226-229 ◽  
Author(s):  
Bei Ling Yao ◽  
Jian Huang ◽  
Liang Min Cai ◽  
Ke Tang ◽  
Bing Ren ◽  
...  
Keyword(s):  
Tin Oxide ◽  
Energy Dispersive Spectrometer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Glass Substrates ◽  
Eds Analysis ◽  
Zn Content ◽  
Sublimation Method ◽  
Xrd Studies ◽  
The One

Polycrystalline CdZnTe (CZT) films were grown by close-spaced sublimation method. The CdZnTe films were prepared on fluorine doped tin oxide (FTO) glass substrates at various argon (Ar) pressures from 200 Pa to 700 Pa. A comparative study of the films at different pressures was obtained by X-ray diffraction (XRD), scanning electron microscope (SEM) and Energy dispersive spectrometer (EDS) respectively. The XRD studies revealed that CdZnTe films had a preferential orientation along the (111) phase except the one at 500 pa. EDS analysis indicated that the increasing of Ar pressure decreased Zn content.

scholarly journals A Simple Approach to the Synthesis of Hexagonal-Shaped Silver Nanoplates

2011 ◽  
Vol 2011 ◽  
pp. 1-5 ◽  
Author(s):  
G. Cynthia Jemima Swarnavalli ◽  
V. Joseph ◽  
V. Kannappan ◽  
D. Roopsingh
Keyword(s):  
Simple Approach ◽  
Capping Agent ◽  
X Ray Diffraction ◽  
X Ray ◽  
Silver Nanoplates ◽  
Transmission Electron ◽  
Growth Method ◽  
Xrd Studies ◽  
20 Nm ◽  
Faceted Particles

This paper deals with the synthesis of hexagonal-shaped silver nanoplates with diameters ranging from 15 to 20 nm along with a smooth nanobulk of 120 nm. These nanoplates were prepared by a kinetically controlled solution growth method using mild reducing agent dextrose, polyvinylpyrrolidone (PVPMw40 kDa) as the capping agent and urea as a habit modifier and at a moderate temperature of50°C. The crystal structure of the highly faceted particles consists mostly of (111) surfaces as revealed by both X-ray diffraction (XRD) studies and transmission electron microscopy (TEM).

Structural and optical properties of Tin Oxide and Indium doped SnO2 thin films deposited by thermal evaporation technique

2016 ◽  
Vol 12 (3) ◽  
pp. 4394-4399
Author(s):  
Sura Ali Noaman ◽  
Rashid Owaid Kadhim ◽  
Saleem Azara Hussain
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Tin Oxide ◽  
Thermal Evaporation ◽  
Pure Sno2 ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Evaporation Technique ◽  
Sno2 Thin Films

Tin Oxide and Indium doped Tin Oxide (SnO2:In) thin films were deposited on glass and Silicon  substrates  by  thermal evaporation technique.  X-ray diffraction pattern of  pure SnO2 and SnO2:In thin films annealed at 650oC and the results showed  that the structure have tetragonal phase with preferred orientation in (110) plane. AFM studies showed an inhibition of grain growth with increase in indium concentration. SEM studies of pure  SnO2 and  Indium doped tin oxide (SnO2:In) ) thin films showed that the films with regular distribution of particles and they have spherical shape.  Optical properties such as  Transmission , optical band-gap have been measured and calculated.

Synthesis, crystal structure, luminescence, and photocatalytic properties of a 2D Cu(II) metal-organic frameworks based on 3,5-di(1H-benzimidazol-1-yl)pyridine and 4,4′-oxybis(benzoate) ligands

2020 ◽  
Vol 75 (8) ◽  
pp. 727-732
Author(s):  
Chen Zhang ◽  
Jian-Qing Tao
Keyword(s):  
Crystal Structure ◽  
Thermal Analysis ◽  
Uv Light ◽  
Metal Organic Framework ◽  
Metal Organic Frameworks ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Light Irradiation ◽  
Photocatalytic Activities ◽  
Metal Organic

AbstractA new Cu(II) metal-organic framework, [Cu(L)(OBA)·H2O]n (1) [H2OBA = 4,4′-oxybis(benzoic acid), L = 3,5-di(1H-benzimidazol-1-yl)pyridine] was hydrothermally synthesized and characterized through IR spectroscopy, elemental and thermal analysis and single-crystal X-ray diffraction. Complex 1 is a four-connected uni-nodal 2D net with a (44·62) topology which shows an emission centered at λ ∼393 nm upon excitation at λ = 245 nm. Moreover, complex 1 possesses high photocatalytic activities for the decomposition of Rhodamine B (RhB) under UV light irradiation.

scholarly journals Optical, XPS and XRD Studies of Semiconducting Copper Sulfide Layers on a Polyamide Film

2009 ◽  
Vol 2009 ◽  
pp. 1-8 ◽  
Author(s):  
Valentina Krylova ◽  
Mindaugas Andrulevičius
Keyword(s):  
Photoelectron Spectroscopy ◽  
Copper Sulfide ◽  
Diffusion Method ◽  
X Ray Diffraction ◽  
Xps Spectra ◽  
X Ray ◽  
Xrd Studies ◽  
Polyamide Film ◽  
Indirect Band Gap ◽  
Xrd Method

Copper sulfide layers were formed on polyamide PA 6 surface using the sorption-diffusion method. Polymer samples were immersed for 4 and 5 h in 0.15 mol⋅  solutions and acidified with HCl (0.1 mol⋅) at . After washing and drying, the samples were treated with Cu(I) salt solution. The samples were studied by UV/VIS, X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) methods. All methods confirmed that on the surface of the polyamide film a layer of copper sulfide was formed. The copper sulfide layers are indirect band-gap semiconductors. The values of are 1.25 and 1.3 eV for 4 h and 5 h sulfured PA 6 respectively. Copper XPS spectra analyses showed Cu(I) bonds only in deeper layers of the formed film, while in sulfur XPS S 2p spectra dominating sulfide bonds were found after cleaning the surface with ions. It has been established by the XRD method that, beside , the layer contains as well. For PA 6 initially sulfured 4 h, grain size forchalcocite, , was  nm and fordjurleite, , it was 54.17 nm. The sheet resistance of the obtained layer varies from 6300 to 102 .

scholarly journals Hydrothermal Synthesis, Characterization and Exploration of Photocatalytic Activities of Polyoxometalate: Ni-CoWO4 Nanoparticles

Crystals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 456
Author(s):  
Fahad A. Alharthi ◽  
Hamdah S. Alanazi ◽  
Amjad Abdullah Alsyahi ◽  
Naushad Ahmad
Keyword(s):  
Electron Microscopy ◽  
Hydrothermal Synthesis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Structure Morphology ◽  
Photocatalytic Activities ◽  
Ft Ir ◽  
Photocatalytic Reactions ◽  
Cobalt Tungstate

This study demonstrated the hydrothermal synthesis of bimetallic nickel-cobalt tungstate nanostructures, Ni-CoWO4 (NCW-NPs), and their phase structure, morphology, porosity, and optical properties were examined using X-ray Diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), Scanning electron microscopy- energy dispersive X-ray spectroscopy (SEM-EDS), high resolution Transmission electron microscopy (HR-TEM), Brunauer-Emmett-Teller (BET) and Raman instruments. It was found that as-calcined NCW-NPs have a monoclinic phase with crystal size ~50–60 nm and is mesoporous. It possessed smooth, spherical, and cubic shape microstructures with defined fringe distance (~0.342 nm). The photocatalytic degradation of methylene blue (MB) and rose bengal (RB) dye in the presence of NCW-NPs was evaluated, and about 49.85% of MB in 150 min and 92.28% of RB in 90 min degraded under visible light. In addition, based on the scavenger’s study, the mechanism for photocatalytic reactions is proposed.

A New Organic-Inorganic Hybrid Based on L-Arginine and Polyoxoanion

2015 ◽  
Vol 1105 ◽  
pp. 335-338
Author(s):  
Qiong Wu ◽  
Jing Lu ◽  
Xiao Lin Ji ◽  
Tao Yu Zou ◽  
Zhen Fang Qiao ◽  
...  
Keyword(s):  
Hydrogen Bonding ◽  
Sodium Cation ◽  
Water Molecules ◽  
X Ray Diffraction ◽  
Inorganic Hybrid ◽  
X Ray ◽  
Hydrogen Bonding Interactions ◽  
Photocatalytic Activities ◽  
Metal Organic ◽  
Supramolecular Networks

Modifying polyoxometalates with organic and/or metal-organic moieties is a widely adopted method for broading the range of properties. In this work a new polyoxometalate constructed from Anderson-type polyoxoanions and L-arginine (Arg =L-arginine) molecules Na [CrMo6(OH)6O18]}(H2Arg)2·8H2O(1) has been synthesized via conventional method and characterized by routine techniques. Single-crystal X-Ray diffraction analysis shows that compound 1 is constructed by chiralL-arginine grafted Anderson-type clusters, sodium cation and water molecules which are further stabilized by hydrogen bonding interactions constitute 3D supramolecular networks. In addition, both antitumor behavior and photocatalytic activities of compound 1 were investigated.

COMPOSITION DEPENDENCE OF SUPERCONDUCTIVITY AND CRYSTAL STRUCTURE IN La(Ba1−xCax)2Cu3O7−y SYSTEM

1989 ◽  
Vol 03 (04) ◽  
pp. 307-311 ◽  
Author(s):  
N. CAO ◽  
J.Q. ZHENG ◽  
X.Y. SHAO ◽  
X.S. CHEN ◽  
W.Y. GUAN
Keyword(s):  
Crystal Structure ◽  
Transition Temperature ◽  
Superconducting Transition Temperature ◽  
Composition Dependence ◽  
Superconducting Transition ◽  
Orthorhombic Structure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Resistivity Measurements ◽  
Zero Resistance

The composition dependence of superconductivity and crystal structure in La ( Ba 1−x Ca x)2 Cu 3 O 7−y system was determined by the resistivity measurements and X-ray diffraction analysis. The superconducting transition temperature is raised with the increase of Ca content till x=0.6, at which the zero resistance temperature of the sample is 81.5 K. In the meanwhile, the crystal structure of the sample changed from tetragonal (x=0) to orthorhombic structure (x=0.2, 0.4, 0.6). With further increase of Ca content, the superconductivity decrease for the sample of x=0.8 with mixed phases including the orthorhombic oxygen-deficient perovskite-like (ODP) structure and no superconducting transition is found at 4.2 K for the sample of x=1 without the ODP structure. A possible explanation of these experimental results is given.

Colossal Magnetoresistance in Thick La0.7Ca0.3MnO3 Films

1995 ◽  
Vol 384 ◽  
Author(s):  
Randolph E. Treece ◽  
P. Dorsey ◽  
M. Rubinstein ◽  
J. M. Byers ◽  
J. S. Horwitz ◽  
...  
Keyword(s):  
Colossal Magnetoresistance ◽  
Single Phase ◽  
Laser Deposition ◽  
Orthorhombic Structure ◽  
X Ray Diffraction ◽  
Post Deposition Annealing ◽  
X Ray ◽  
Mr Effect ◽  
Deposited Films ◽  
Post Deposition

ABSTRACTThick films (0.6 and 2.0 μm) of the colossal magnetoresistance (CMR) material, La0.7Ca0.3MnO3 (LCMO), have been grown by pulsed laser deposition (PLD). The films were grown from single-phase LCMO targets in 100 mTorr 02 pressures and the material deposited on (100) LaAlO3 substrates at deposition temperatures of 800°C. The deposited films were characterized by X-ray diffraction (XRD), magnetic field-dependent resistivity, and Rutherford backscattering spectroscopy (RBS). The LCMO films were shown by XRD to adopt an orthorhombic structure. Brief post-deposition annealing led to ~50,000% and ~12,000% MR effect in the 0.6 μm and 2.0 μm films, respectively.

Formation and Thermal Stability of Nd0.32Y0.68Si1.7 Layers Formed by Channeled Ion Beam Synthesis

1998 ◽  
Vol 514 ◽  
Author(s):  
M. F. Wu ◽  
A. Vantomne ◽  
S. Hogg ◽  
H. Pattyn ◽  
G. Langouche ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Ion Beam ◽  
Hexagonal Structure ◽  
Orthorhombic Structure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Good Crystalline Quality ◽  
Ion Beam Synthesis ◽  
Thermal Stability Of

ABSTRACTThe Nd-disilicide, which exists only in a tetragonal or an orthorhombic structure, cannot be grown epitaxially on a Si(111) substrate. However, by adding Y and using channeled ion beam synthesis, hexagonal Nd0.32Y0.68Si1.7 epilayers with lattice constant of aepi = 0.3915 nm and cepi = 0.4152 nm and with good crystalline quality (χmin of Nd and Y is 3.5% and 4.3 % respectively) are formed in a Si(111) substrate. This shows that the addition of Y to the Nd-Si system forces the latter into a hexagonal structure. The epilayer is stable up to 950 °C; annealing at 1000 °C results in partial transformation into other phases. The formation, the structure and the thermal stability of this ternary silicide have been studied using Rutherford backscattering/channeling, x-ray diffraction and transmission electron microscopy.

Sign in / Sign up

Export Citation Format

Share Document